Frequency 3880V 30000SR @97.0°W CBand, locks and scans in 8 channels on my AZBox Me, but no videos or Audio can be displayed or heard . On Amiko A3, it doesn't lock and doesn't scan in any channels. This is a CBS feed as listed on Lyngsat. The signal quality on AZBox Me is 73% and Amiko A3 is 85%. Anyone locking and displaying channels on this transponder?
Can't Lock 3880V 30000SR @ 97.0°W
- Thread starter Babadem
- Start date
- Latest activity Latest activity:
- Replies 14
- Views 2K
- Status
also here: http://www.satelliteguys.us/xen/threads/97w-mux-itc.355939/page-2
I dunno, but it just started workin (kinda) again. Maybe they're trying to fix that hiccup.(?)
Something has changed on the TP,
Looks like I have a double listing now, one works, one doesn't.
Yup, deleted channels and rescanned, 24 channels.
I dunno, but it just started workin (kinda) again. Maybe they're trying to fix that hiccup.(?)
Something has changed on the TP,
Looks like I have a double listing now, one works, one doesn't.
Yup, deleted channels and rescanned, 24 channels.
Different transponder the one with 24 channels is 3980, the OP was looking at 3880
PLEASE LOG IN TO GET RID OF THESE ADS!
3880 V 30000 on 97 W are pathfire feeds for TV stations.
You can not pull them in with a FTA receiver listed by the op.
You can not pull them in with a FTA receiver listed by the op.
PLEASE LOG IN TO GET RID OF THESE ADS!
I knew someone would ask this.
I don't know for certain, but some do and they need to run through a pc program to get it viewable.
Those signals are designed to go directly to tv stations and are controlled remotely so the station has no real control over it they just make sure they have their system set up on that frequency.
That's about all I have been told on that signal.
I believe it has something to do with the way the pids are sent out or not sent out which is why FTA receivers do not see any channels there.
- Status
Similar threads
- Locked
