Can't Lock 3880V 30000SR @ 97.0°W

[Babadem]

Frequency 3880V 30000SR @97.0°W CBand, locks and scans in 8 channels on my AZBox Me, but no videos or Audio can be displayed or heard . On Amiko A3, it doesn't lock and doesn't scan in any channels. This is a CBS feed as listed on Lyngsat. The signal quality on AZBox Me is 73% and Amiko A3 is 85%. Anyone locking and displaying channels on this transponder?

 

[FaT Air]

Q=75 but no channels scan in on the Amiko HDSE here,

 

[Magic Static]

It looks like "Dead Air" on my setup. There is signal but nothing being broadcast.

 

[FaT Air]

also here: http://www.satelliteguys.us/xen/threads/97w-mux-itc.355939/page-2
I dunno, but it just started workin (kinda) again. Maybe they're trying to fix that hiccup.(?)
Something has changed on the TP,
Looks like I have a double listing now, one works, one doesn't.
Yup, deleted channels and rescanned, 24 channels.

 

[Magic Static]

also here: http://www.satelliteguys.us/xen/threads/97w-mux-itc.355939/page-2
I dunno, but it just started workin (kinda) again. Maybe they're trying to fix that hiccup.(?)
Something has changed on the TP,
Looks like I have a double listing now, one works, one doesn't.
Yup, deleted channels and rescanned, 24 channels.

Different transponder the one with 24 channels is 3980, the OP was looking at 3880

 

[Babadem]

Different transponder the one with 24 channels is 3980, the OP was looking at 3880

You're right, my Post was in reference to 3880V 30000SR. Thanks.

 

[Titanium]

Oops

 

[Babadem]

10MHz spacing with both muxes running at SR 30K? Not sure how well that will work....

Could you please elaborate?

 

[Titanium]

On phone and also read the post wrong... Sorry

 

[Lehman bud farm]

3880 V 30000 on 97 W are pathfire feeds for TV stations.
You can not pull them in with a FTA receiver listed by the op.

 

[FaT Air]

Whoops, sorry for any confusion. Bad eyesight n more. CRS and everything else creeping up on me.

 

[Babadem]

3880 V 30000 on 97 W are pathfire feeds for TV stations.
You can not pull them in with a FTA receiver listed by the op.

Will using any of the Satellite PC cards work with this?

 

[Lehman bud farm]

Will using any of the Satellite PC cards work with this?

I knew someone would ask this.
I don't know for certain, but some do and they need to run through a pc program to get it viewable.
Those signals are designed to go directly to tv stations and are controlled remotely so the station has no real control over it they just make sure they have their system set up on that frequency.
That's about all I have been told on that signal.
I believe it has something to do with the way the pids are sent out or not sent out which is why FTA receivers do not see any channels there.

 

[Titanium]

I also don't have any experience with the Pathfire DMG distribution, but it might be possible to extract the files from a TS recording (or live via a buffer file) using IPCleaner.

 

[mr3p]

Did you ever figure these out? Any chance they are 4:2:2 h.264?