Dish Reflector Size

[charlesrshell]

Does anyone have a chart of all the Dishes reflector size? I thought I had them but can't find it in my computer. Is a DISH 500+ and 1000+ the same size?

 

[NYDutch]

This is the list I have:

Dish 300 18"H x 18"W
Dish 500 22.5"H x 20"W
Dish 500+ 23.8"H x 30.9"W
Dish 1000 18"H x 23"W
Dish 1000.2 19"H x 24"W
Dish 1000.4 20.8"H x 22.3"W
Dish 1000+ 23.8"H x 30.9"W

 

[charlesrshell]

This is the list I have:

Dish 300 18"H x 18"W
Dish 500 22.5"H x 20"W
Dish 500+ 23.8"H x 30.9"W
Dish 1000 18"H x 23"W
Dish 1000.2 19"H x 24"W
Dish 1000.4 20.8"H x 22.3"W
Dish 1000+ 23.8"H x 30.9"W

Thanks NYDutch.

 

[Jim S.]

How about the Superdish 105 and 121?

 

[NYDutch]

How about the Superdish 105 and 121?

The info so far I've found lists the SuperDish at 20"H x 36"W. If I can verify that, I'll add it to my list...

 

[charlesrshell]

I have a DISH contractor telling me this dish reflector will replace a 500+ / 1000+ reflector. Looks like a 1000.4 reflector to me. What do ya'll think?

 

[NYDutch]

Does it match the 1000.4 dimensions? From the narrower bottom holes, it appears to be a 1K4 rather than a 1K2.

 

[charlesrshell]

I haven't seen it yet to measure it. He says he has a brand new one and is bringing it by today or tomorrow. I have never seen a black 500+ / 1000+ reflector before. I have my doubts. I sure hope he is correct. I love the black dish.

 

[HipKat]

I haven't seen it yet to measure it. He says he has a brand new one and is bringing it by today or tomorrow. I have never seen a black 500+ / 1000+ reflector before. I have my doubts. I sure hope he is correct. I love the black dish.

Looks like an international Reflector to me

 

[NYDutch]

Is he talking about just a reflector swap? Or a complete dish assembly swap...

 

[charlesrshell]

I have a 1000+ now with the four LNBs. He installed new LNBs yesterday but didn't have a reflector.

Looks like an international Reflector to me

What is the dish model number for an International reflector?

 

[charlesrshell]

Is he talking about just a reflector swap? Or a complete dish assembly swap...

Yes, just a reflector swap.

 

[NYDutch]

Yes, just a reflector swap.

Ok, let us know what he brings. The 1K4 reflector is smaller than the 500+/1000+ reflector, and I don't know if the hole patterns match.

 

[charlesrshell]

Ok, let us know what he brings. The 1K4 reflector is smaller than the 500+/1000+ reflector, and I don't know if the hole patterns match.

Will do. Lets say the bolts holes line up but the reflector is smaller than the 1000+. That won't work, right?

 

[NYDutch]

Will do. Lets say the bolts holes line up but the reflector is smaller than the 1000+. That won't work, right?

Which sats are you using? I don't how well it would work for a western arc plus international setup. HipKat would likely be better informed on an international setup than I would.

 

[charlesrshell]

Which sats are you using? I don't how well it would work for a western arc plus international setup.

I am on Western Arc. Right now just looking at 110, 119, & 129 sats. Maybe 118 later down the road.

 

[NYDutch]

I am on Western Arc. Right now just looking at 110, 119, & 129 sats. Maybe 118 later down the road.

Then I think you would be better off with a full 1K2 or 1K4 dish assembly. You could add a wing dish later for 118.

 

[charlesrshell]

Then I think you would be better off with a full 1K2 or 1K4 dish assembly. You could add a wing dish later for 118.

OK. I would need the old LNBs to go with my DPH42 switch. So what dish should I use? Is it the black one? It is all confusing to me since all the LNBs are getting swapped around between the Eastern and Western Arcs.

 

[charlesrshell]

I took a closer look at my 1000+ dish. The bolt holes pattern sure looks like the same ones that is in my pic in post #6. Look at this dish I found in Dish Depot's web site. I don't think I have seen this dish before. Looks like a black one to me but not a 1K2 or IK4 dish. Maybe this DISH contractor might be on to something. Can't wait to see what he brings me.

https://store.dishdepot.com/dish-500-plus-dish-assembly-for-3-satellites-

 

[Bobby]

I took a closer look at my 1000+ dish. The bolt holes pattern sure looks like the same ones that is in my pic in post #6. Look at this dish I found in Dish Depot's web site. I don't think I have seen this dish before. Looks like a black one to me but not a 1K2 or IK4 dish. Maybe this DISH contractor might be on to something. Can't wait to see what he brings me.

https://store.dishdepot.com/dish-500-plus-dish-assembly-for-3-satellites-

That's because it is a 500+ dish. That would do you no good considering it won't get 129...