Does anyone have a chart of all the Dishes reflector size? I thought I had them but can't find it in my computer. Is a DISH 500+ and 1000+ the same size?
Dish Reflector Size
- Thread starter charlesrshell
- Start date
- Latest activity Latest activity:
- Replies 68
- Views 12K
This is the list I have:
Dish 300 18"H x 18"W
Dish 500 22.5"H x 20"W
Dish 500+ 23.8"H x 30.9"W
Dish 1000 18"H x 23"W
Dish 1000.2 19"H x 24"W
Dish 1000.4 20.8"H x 22.3"W
Dish 1000+ 23.8"H x 30.9"W
Dish 300 18"H x 18"W
Dish 500 22.5"H x 20"W
Dish 500+ 23.8"H x 30.9"W
Dish 1000 18"H x 23"W
Dish 1000.2 19"H x 24"W
Dish 1000.4 20.8"H x 22.3"W
Dish 1000+ 23.8"H x 30.9"W
The info so far I've found lists the SuperDish at 20"H x 36"W. If I can verify that, I'll add it to my list...
PLEASE LOG IN TO GET RID OF THESE ADS!
Does it match the 1000.4 dimensions? From the narrower bottom holes, it appears to be a 1K4 rather than a 1K2.
I haven't seen it yet to measure it. He says he has a brand new one and is bringing it by today or tomorrow. I have never seen a black 500+ / 1000+ reflector before. I have my doubts. I sure hope he is correct. I love the black dish.
Is he talking about just a reflector swap? Or a complete dish assembly swap...
PLEASE LOG IN TO GET RID OF THESE ADS!
I have a 1000+ now with the four LNBs. He installed new LNBs yesterday but didn't have a reflector.
What is the dish model number for an International reflector?
Ok, let us know what he brings. The 1K4 reflector is smaller than the 500+/1000+ reflector, and I don't know if the hole patterns match.
Will do. Lets say the bolts holes line up but the reflector is smaller than the 1000+. That won't work, right?
Which sats are you using? I don't how well it would work for a western arc plus international setup. HipKat would likely be better informed on an international setup than I would.
PLEASE LOG IN TO GET RID OF THESE ADS!
I am on Western Arc. Right now just looking at 110, 119, & 129 sats. Maybe 118 later down the road.
Then I think you would be better off with a full 1K2 or 1K4 dish assembly. You could add a wing dish later for 118.
OK. I would need the old LNBs to go with my DPH42 switch. So what dish should I use? Is it the black one? It is all confusing to me since all the LNBs are getting swapped around between the Eastern and Western Arcs.
I took a closer look at my 1000+ dish. The bolt holes pattern sure looks like the same ones that is in my pic in post #6. Look at this dish I found in Dish Depot's web site. I don't think I have seen this dish before. Looks like a black one to me but not a 1K2 or IK4 dish. Maybe this DISH contractor might be on to something. Can't wait to see what he brings me.
https://store.dishdepot.com/dish-500-plus-dish-assembly-for-3-satellites-
https://store.dishdepot.com/dish-500-plus-dish-assembly-for-3-satellites-
That's because it is a 500+ dish. That would do you no good considering it won't get 129...
PLEASE LOG IN TO GET RID OF THESE ADS!
