VIP722 and Hopper 3 on same account

RTCDude

SatelliteGuys Pro
Original poster
Sep 20, 2005
299
418
San Jose, CA
Didn’t see anything current.

Will Dish now allow a VIP722 and a Hopper 3 on the same account? I realize I would have to have separate dishes (all user owned equipment).

It would be more convenient to have both receivers running during a transition period while transferring all the timers, preferences, etc. After the transition to the Hopper 3 was complete, the VIP722 would be retired and deactivated off the account.
 
  • Like
Reactions: AkaDoubleG
Didn’t see anything current.

Will Dish now allow a VIP722 and a Hopper 3 on the same account? I realize I would have to have separate dishes (all user owned equipment).

It would be more convenient to have both receivers running during a transition period while transferring all the timers, preferences, etc. After the transition to the Hopper 3 was complete, the VIP722 would be retired and deactivated off the account.
It wouldn't have to be separate dishes but it WOULD be an exotic installation
DPP LNBF to 44 switch trunked to 42 switch.
722 connected to port 1 out of the 44 switch with a power inserter or power inserter on port 1 out and 722 on port 2 out.
Hopper three connected to port 1 out of the 42 switch with a solo hub for Joeys and power inserter on either port 1 or port 2 out
 
It wouldn't have to be separate dishes but it WOULD be an exotic installation
DPP LNBF to 44 switch trunked to 42 switch.
722 connected to port 1 out of the 44 switch with a power inserter or power inserter on port 1 out and 722 on port 2 out.
Hopper three connected to port 1 out of the 42 switch with a solo hub for Joeys and power inserter on either port 1 or port 2 out
Not worth the time and expense just to transition timers and preferences....
 
  • Like
Reactions: charlesrshell
DPP LNBF to 44 switch trunked to 42 switch.
Why the folderol? Why not leave the DPP44 switch out and just put the H3 on port 1 and the 722 on port 2 of the DPH42?
Not worth the time and expense just to transition timers and preferences....
I agree, but that may not be the case for the OP. Now for timers, I have long advocated for the save/restore to be available on DishAnywhere, and not the dubious remote feature.
 
Didn’t see anything current.

Will Dish now allow a VIP722 and a Hopper 3 on the same account? I realize I would have to have separate dishes (all user owned equipment).

It would be more convenient to have both receivers running during a transition period while transferring all the timers, preferences, etc. After the transition to the Hopper 3 was complete, the VIP722 would be retired and deactivated off the account.

Why the folderol? Why not leave the DPP44 switch out and just put the H3 on port 1 and the 722 on port 2 of the DPH42?

I agree, but that may not be the case for the OP. Now for timers, I have long advocated for the save/restore to be available on DishAnywhere, and not the dubious remote feature.
But it is the case according to the OP...
 
  • Like
Reactions: charlesrshell
Why the folderol? Why not leave the DPP44 switch out and just put the H3 on port 1 and the 722 on port 2 of the DPH42?

I agree, but that may not be the case for the OP. Now for timers, I have long advocated for the save/restore to be available on DishAnywhere, and not the dubious remote feature.
Because I think you lose the dual tuner when a 722 is connected to a Hybrid device