Why doesn’t my Hopper 3 shut off (go to sleep) from the remote power button?
- Thread starter ppappas
- Start date
- Latest activity Latest activity:
- Replies 26
- Views 8K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
As this involves the remote, posting the remote's software version in addition to the Hopper H3's software version might be more helpful as it could be the remote's software version that is the culprit. If one had more than one remote, one can also see if the same problem occurs or not to isolate the issue should it be the same model of remote or not and the software version.
My remote is a model 54.3, Hardware UZ05, Firmware E004G286EZ21. I don't have another for the Hopper.
The label on the back of my H3 says it draws 95 watts watts per hour. That's 0.095 kw/h.
For me, that's $0.304 per day.
I don't worry about when or if it goes into stand by mode.
For me, that's $0.304 per day.
I don't worry about when or if it goes into stand by mode.
I used a watt meter and tested it a few years ago. The Hopper3 used ~50 watts regardless of if it was on or not.
