Recent content by eddwall

I had two hoppers and four Joey's , I disconnected one of my Joey's and put in a splitter to handle two rooms with one Joey. It works perfectly fine.

UPDATE: Received S246 last night, and signal meter is back and the ability to delete channels has returned. Thanks DISH ... That was quick

I have a OTA module on one of my hoppers (S244). I got the module when they first came out. No problem installing and deleting or adding channels at first. Or should I say on a earlier software. Recently l heard about some new channels, so I performed a "scan" to find them. Now it appears that...

When a recording is setup and a program is being recorded and a user (Hopper or Joey) wants to watch the same program being recorded it uses two separate tuners instead of defaulting to the same tuner. I moved things around and fixed things for my wife, by moving my son to the same tuner that...

I have 3 rentals on Hopper 1, can only "watch" these rentals from Hopper 1 or the two Joey's linked to Hopper 1. You can see the rentals from Hopper 2, but the watch option will not come up. This applies to the two Joey's linked to Hopper 2 as well. I have a two Hopper (S244) and four Joey's...

I can't get the (METV) schedule to update. Would love to record some of the shows and setup timers, but no information is available in guide. Is anyone else having this problem and is their a solution. Please forgive me if this has already been discussed.

It is not the command that is slow, it is the response of the Hopper. Example: You are on a channel, from remote you change the channel. You can see the new channel on the header, but your screen is black and the new channel does not appear for a few seconds. The actual picture & audio are...

Thanks for the input ! I have rebooted several times, no luck at all. I counted 1001, 1002, 1003, 1004, 1000 then the channel appears when you do a simple task like change the channel. Almost 5 full seconds for the channel to change. It is happening on both Hoppers and can't get blue tooth to...

Sorry using IPhone, anyway the response of the Hopper is real slow when changing channels are performing a task, This is extremely noticeable, even by my wife & kids are making comments. What was advertised as the fastest system on the market, "Is now the Slowest". !!

Just wanted to check with everyone. Since I received the new software (s230), my system is very slow in responding

I have 230 on both Hoppers. I have two different Bluetooth ear devices . Went into system, turned Bluetooth on, and paired devices. Devices showed paired & connected. But I get no audio out of either ear device. Rebooted both Hoppers, but I get the same results. Am I missing something here?

Audio option -- make PCM only that usually fixes it

And the Dodge dealer said, "What's 's Cruise Control" !!

I have a iPhone and yes you can get your PTAT recordings.

I use the HIC for my own MOCA network. I decided to go straight Ethernet into my main Hopper. With bridging on I have broadband to the other Hooper and Joeys (4). I use the HIC to extend my Ethernet network to places were I don't have CAT 5/6 cable. Ethernet--->HIC--->RG-6...