Recent content by superslug

Thanks for help SatelliteAV.

My receiver will not update from Galaxy 97 satellite. I have good signal. Signal low on Horizontal side: 11874 H 22000--44% 11911 H 10525--44% all the horizontal are 44 percent The vertical side are 71%. 11867 V 22000 Why so many transponders for just to update the firmware? What is the...

I picked 83W k band for now because I like cartoons in the morning. Also do not have to move my c band dish. I like Mr.Magoo on PBJ.

I got my primestar to work off of 83w (amc-9). I find the original lnb. The signal quality for rtv is only between 50 to 56 percent. I think needs a little adjustment. Thanks for all the help:)

Thanks chapelrun for answer my first question...

Would eagle aspen 270 lnb from Inmpakproducts work? http://impaktproducts.com/FTA-International-LNBF-p-1-c-274.html Does any have picture of a primestar elliptical dish using a universal lnbf? My idea is to use the dish to pickup 83w amc-9, because my 7 1/2 feet will not work. One reason...

Do I need lnb with a feed horn?

Can this primestar dish work for fta? The elliptical dish measure 39in a cross. Do not have the mount for lnb or original lnb. Can I use a universal lnbf? I need help with this project. Any idea!

I keep losing CW on Galaxy 17(91W). The transponder is 3720 H 28880. Does anyone have a idea what is going on?

Thanks for the help wallyhts.

Would a Tadiran TL-5955 2/3AA Wire 3.6V Lithium Thionyl Battery from ebay work for a battery in a 4dtv 920 receiver? My battery checks out to be okay, but I'm thinking on replace it anyway.

Would a Tadiran TL-5955 2/3AA Wire 3.6V Lithium Thionyl Battery from ebay work for a battery in a 4dtv 920 receiver?

Battery Is Good

Receiver number on system status match the back number on the receiver. System status current version 0000006D.

Does anyone know how to program this General Instrument receiver? It has vc 2 plus installed. I know how to use my Manhattan receiver with a 7 1/2ft BUD with no problems but I'm lost on old school receivers. Can I update the software install? How do you check the battery on the receiver...