Search results for query: *

I can't even begin to count the number of service calls I do that the fittings or cables need to be changed. I recabled a 4 receiver house today - it had a huge crawl space (I could stand up under the house) and the existing cabling was wrapped around the house with RG-59.... The only thing I...

Without testing it myself, the SWM splitter (1x4) may be bad. Just a guess, but if it is, it will likely start failing on the other receiver's soon as well.

That will work fine - but, you got the SWM LNB to avoid the 2nd line..........You need nothing else except a 2nd BBC. Remember to remove the BBC's when you fire up the SWM LNB.

2 way SWM splitter will run 2 HD/DVR's (4 tuners). No more than 8 tuners to a SWM LNB. If you have a 2 way downline, must have 8 way closest to dish. Will work with 4 way splitters...for awhile.

all evens on 103ca are 0 not bbc problem - ca does not require bbc to come in. 99 and 103 cb require bbc. only evens are 0- center conductor corrosion. Plus I can change tilt about 6 degrees and not lose 119, not so for 99/103.

If you're seeing zero's on all even's for 103, I would suspect corrosion in a connect on the feed to the multiswitch 103 18 volt input.

BBC's are not required for any SWM installation. Check tilt for your area and adjust accordingly. repeak via same method.

Your dish needs to be aligned properly. Sounds like your tilt is off a little. If you could post your signal strengths it would help alot.

Green does MRV, others don't.

Also check your signal levels. If your odd transponders all show 0's, I would guess that the cable running to it needs to be replaced.....if your even transponders all show 0's, I would check to see which fitting has the corroded center conductor..

Cool. HAven't tried it yet - wife is watching something on the DVR. OP - can you check your 'manage recordings' in the menu and see if there's anything else going on? just saw your reply - - probably a repeat or already recoded then...

Don't think it's new, but, I think you're spot on with the repeat, already recorded or #3 priority.

sure I can. select 3 series to record that will all broadcast an episode at the same time..

Correct, which means that with only two scheduled to record, you will not see the orange X

Add a 3rd show to the same time slot to see what happens

Push the guide button twice...

If a roof mount location is available - then the pole mount is chargeable. Dish can only be mounted on a stick built shingle roof. No Mobile Home roofs No roof if not asphalt shingled. Have I seen them on these roofs - Yes. Have I put them there - No. Do I relocate them if I'm on a service...

But, we do carry RF Converters - - - connect HD composite output to RF Converter to RF Cable to TV. Or you can pick one up just in case.

Not at this time.

The order won't take effect without a way for the receiver to call it in. ie: phone line.

Do you have ANY standard def receivers? Do they have a Band Stop Filter on them? If not - that's what's causing the problem with the MRV. And call your install tech - he may welcome the opportunity to correct his install and avoid a repeat service call. You're welcome

I've never had to do a 3 -> 5 LNB change on a service call. I've done a few 5 -> 3 changes because of Line of Sight issues with trees growing out to block the 119 since the original install - and most of those have been 5 - 10 yrs after the install.

Choice Package: 8 Channels Adult Comtemporary: Metro Blend Jazz - - 3 channels Specialty: Great Standards Specialty: Rat Pack Latin -- 2 Channels Choice Xtra: 11 Channels ALL Above + Irish Oldies Hits: Familiar Favorites Urban: Groove Lounge Choice Ultimate: 14 Channels ALL Above +...

Send a rough diagram and I'll do it.

No - it's bolt on using brackets.