Search results for query: *

Scott, Just wanted to let you know that the board is still working great!!! It got a bit of a workout this past weekend and will get one again today. Also get a hold of me on Jim's issue, I was doing some brainstorming and was thinking that we could keep using high volatage on his from the...

I think that is what I am going to do this weekend is try some different firmware(s)... I am running the firmware that is posted here.. a buddy of mine was having some problems with the "stock" firmware so as soon as I got mine I updated it without even trying it out. So I may roll it back to...

I had a AZbox ultra and I was quite annoyed with the blindscan. It took a long time and didn't work that well. After lightning took out my AZ Ultra I replaced it with the Openbox S10 with the latest firmware.. love the Accurate scan.. but if I leave it on a HD channel for more than about two...

eurosport.. I happen to know of a 920 that if you need one that I would be happey to sell back :) I want to replace the battery but I have it on the music channels right now but I don't know if I will set it up with H2H

I am going to try it this weekend. I should have rephrased on the lnb... its not the "original" original Birdview LNB that would only work with the Birdview receivers.. its the later "modified" Birdview LNB's that had the new what I think was called the "high block" so it would work with other...

I need help again! I have been reading posts about moding a Eagle Aspen 4X4 or a zinwell switch so I can use it with a ortho type setup so that the 13 volts go to one port and 18 volts go to the other port to do the Horizontal and Vertical polarity switch. I guess I want to know is what...

I am thinking of getting dish network now that my DSR-410 has totaly died and I don't want to spend the money to get a new "used" box. I would like to know how to connect it with the stuff I have already. I have a 1000.2 dish already installed on the house (was there when I moved in) with the W...

I lost my DSR-410 and my AZ box just a couple of weeks ago to lightning. It took out the TV, my HK receiver, Blueray player, and the LNB on the fixed dish for the DSR-410 and the LNB on the Birdview for the AZ box. The LNB power supply is junk in the AZ Box and the DSR-410 is totaly fried. So...

I love my BV, I have had no problem yet with DVB-S2 5/6 signals. I am using a AZbox Ultra, and have a DMS 741 LNB. I machined out the scalar to fit the LNB and am using a 48 count rotary encoder for feedback to the Gbox mover. Main reason I like my dish so much is everything on it is HEAVY...

Is it just me or did Fox pull the plug on FX, Big Ten, and a couple of other channels? It worked eariler this week and then was going to watch FX last night and nothing.. I couldn't even get a transponder. I am going to really miss this a whole lot if its gone for good! I with out Big Ten...

As promised I have started slowly on the USALS project for my Birdview. I have been a bit slow going since its been a busy spring around our household. What I want to do it use the control board in one of the Ku dish movers to control a second high current relay board that will run the H-H motor...

I have my DSR-410 (W5 subscription) tv running through my Harmon Kardon receiver that does upscaleing and I cannot believe how good of a picture I get. I watch it on a Samsung 46" LED LCD monitor. My folks have a pizza dish they use for their RV so I hooked it up just to compare between the...

Let me know what you want for a motor and a board! I will definitely buy them from you!

Yup. That is it. I am also going to get a complete one ordered. I think Sadoun has one pretty cheap in their bargen bin. What I want to do in theory is connect a separate 36 volt power supply and two separate higher current relays. The two current relays (blue ones on this board) will...

What, If you don't have any luck with the reed switch as far as positioning this is what I did. I started out by getting a rotary encoder, this is just a little device that makes pulses when the shaft is rotated. These are used in a lot of industrial applications for motion control, I have...

Sounds like you might want to check the firmware rev on your AZbox. Check and see if you have the latest rev installed.

I should elaborate a bit more on my above post.. what I would wand is also need to know is the two birds you are moving between and the USALS information. What I am trying to do is get a PLC to talk USALS (getting one of my EE guys from work to help me) and move the dish rather than using at V...

As lunixman mentoned above, I have a Birdview.. everything is liner across the arc. As for the Vbox with USALS it HAS TO KNOW how many pulses or closures or counts it takes to get from Satellite "A" to Satellite "B".. it is going to move and count pulses or closures across the connectors marked...

Does anyone know how many pulses per degree are sent back on the KU motors? I have modified my birdview and taken off the magnetic reed switch and installed a rotary encoder. I get back 48 pulses per rev which comes out to about 20 pulses per degree of movement. I assume if you could match...

No issues with mine yet loosing locations. My AZbox will automatically turn the east limit on when I blindscan but from what I have heard its an AZbox problem and not the Vbox. It has worked great with my Viewsat 9000 HD also.

I have all the NBC's coming in on the new AZbox Ultra however I have an issue with the audio depending on what mode I choose. If aaa is chosen I only get background sound, if aab I get the left channel, aac I get nothing, aad I get the right channel. I have tried the HDMI and the optical to my...

I have just taken delivery on my AZbox Ultra and am starting to really like it. I have a 8 1/2 foot solid Birdview and now am in the process of choosing an LNBF and I would like to get the most "bang" for my setup. My first LNB was a GeoSat Pro C/Ku which I hooked to my VisionSat 9000 HD...

Yesterday I got the CW channels to come it. There was one additional step I had to do in order to view the channels. I had followed the procedure listed on http://www.satelliteguys.us/231548-a...anually-2.html but I was still having no luck, or they would not show up as a channel on the...

I also had forgot to mention that I had seen earlier posts about re-scanning the TP after entering the channel information manually, which I did with no luck.

I have just taken delivery on a brand new AZbox Ultra. I so far am not sure if I made the right decision getting it. I have spent the last two hours trying to figure out how to get the CW stations to come in on 91W Galaxy 17/C. I have a 80 plus signal and 85 plus quality from the TP however...