Search results for query: *

Power saving mode on a vip222k??

You cant hook an Ethernet cable directly to your dvr and have whole home dvr work. You have to use a cck or cckw

What's kangaroo mode on the h25??

What about fees? I know Dtv is going to tack on some fees. Maybe something like 3$ a month per client?

They might not replace it for that issue, they might tell you be happy with hdmi, so be prepared to tell them it wont turn on

They have an even cheaper one but it must be combined with an international package. Family at 29 is your best bet

They do run a credit check, they only need one cable to each tv if they are installing the newer system. Get an hddvr, and 2 hd receivers. Then you can have whole home, meaning you can watch recordings in all rooms

Throw it on the ground... R16s are so full of issues. When I worked at D tech support we Always had some known issues that the software guys were working on. And as one thing got fixed, new things went wrong. Upgrade to hddvr?

My boss said it was 200$?? 0.o

Ah I did some research and found that. Thanks hutch! So if I were to use a regular 4 port lnb, would I still use swm switches? And would I have to run two lines to each dvr?

Instead of using a 16 switch on this install could I use two 8 way switches? Its a swm install. I am essentially trying to avoid buying a 16 switch

Yeah, dish is easy to split because you can do it at the diplexer, not the back of the box.

Oh gotcha. It looks like one lnb but there are really 3 eyes in it. Its how the new swm lnbs look. Thing of the future..

Yep, solid copper is the optimal choice because it supports the higher frequencies that swm needs to use. If ANY of your in line parts (barrel connections, wall plates, or even crimp connectors instead of compression) are not high frequency, whole home performance goes down the toilet. I had...

Get an rf modulator, hook it up to the composite out (red white yellow) and then do a coax from the out to tv part on the RF mod. If you want hd get an hdmi splitter, then you have to run an hdmi to the second tv. The reason you can't just split the line coming in is the signal has not be...

Ping pong channel should be out in a few months right? ;) Surfing is fun, but id rather do than watch.

Call Dtv tech support and ask them what bird your locals come from. You will most likely want the #5.

You might have to be using an hr34 with built in RVU technology for that to work.

It has to be hooked up to an hd Tv for it to not display it.

Sounds like they just didn't want to do it. Using the dishpointer website you can use the drag and drop tool to check height. What is preventing the line of sight? Trees?

When you install a cck wireless on a swm whole home dvr set up you are not supposed to hook up the ethernet cable. The cck only hooks to the hddvr through coax.

Sorry my post was a little vauge. If you have mrv and want on demand, you cannot do a direct ethernet connection because it will disable whole home. You can definately have mrv without Internet connection though.

You don't need the cinema connection kit IF you are not using whole home dvr. If the hr34 is going to be your only receiver, just do it wired like you have.

Did you do a red Button reset and a unplug reset? What is your dish configuration? If your other one is working fine, I don't think its a Dtv error. Try plugging the other d12 in that spot and see what happens

That's a way good deal.