Search results for query: *

Looks like this TV uses Sony IR protocol. I have an old Sony RM-Y129 remote used for Directv Sony receiver from 1996. The TV function (programmed to default Sony) works with the exception of a few buttons (input, sleep, select, really the important ones)

I found a code 758. It only turns on & off the TV and works volume. Numbers and input/source buttons non functional.

thanks, I tried that for a while, but gave up after about 15 min. I guess I will have to be patient and go through all the codes.

Hi thanks for your reply. Yes I have tried the above codes. Nothing working. Is there an updated list for RCA TV's? I know that the newer RCA TV's are different in terms of infrared signals than the older RCA TV's. Any help is appreciated.

Hello everyone, We just bought a new RCA 55" flatscreen TV. I want to program my dish 6.2 IR/UHF Pro remote to operate the TV. I tried about 100 codes for RCA and nothing works. Anyone know the codes for newer RCA TV's?

an older SD TV. When using the modulator the picture is clear.

Thank you for responding to my post. Yes channel 22 was ONCE the output for TV2, but I also tried many other channels, all grainy. It looks like the problem isn't with my receiver only, as there are many others with this same problem. (In fact one of my neighbors has a 722 receiver with the...

Hello everyone, I have read multiple posts regarding the picture quality on TV2 output. To rule out any possibility of long cable runs, faulty RG6 cables, etc, I hooked the TV2 output from my dish 622 receiver using a 4' RG6 coax with the second TV in the same room as the 622. The picture is...

Thanks for your response. What about grounding to an outlet using a coax ground block? I am afraid that is impossible if I want to make it look good. My roof is very high, and the ridge (horizontal roof peak) is only about 6 feet long. So in order to get to the perimeter, I would have to run...

Yes but is 90 feet too much for the ground cable? I am wondering if it is sufficient to just ground the coax through a grounding block to the grounding bolt on my meter base.

Hi Guys, I realize this question has been asked a million times, but here goes: My OTA antenna is mounted on a 5' mast, on a tripod at the peak of my roof. (My roof is 30' from the ground) I have a 3 year old 2 storey home with a very steep roof pitch. I chose to run the coax cable neatly...

Problem is back again. It is intermittent. I thought moving the receiver away from the other one worked but I guess not. I am sure others may have had this problem. I hope someone can help. The receiver is unusable as it is now.

This is an intermittent problem. I just moved the receiver 3 feet away from the other one. The problem stopped for now, but like I said before it is intermittent. It also worked normally in IR mode (pointing the remote at the receiver). Nothing has changed in my setup in years, all of a sudden...

Hello all, I have a couple of 512 DVR's in my home positioned beside each other. Both UHF remotes use a different channel and both have UHF remote extender cables installed in the rooms that they are being viewed (with the antenna on the end of the cable). Either of these units don't interfere...

I am not sure that i used acronis correctly. trouble is, it takes a very long time for the process. I have an older version I am going to try tomorrow.

I have a Dish DVR 512 receiver. I have another drive that is EXACTLY like the one in my 512. (same model number to the last digit) I want to back up (or clone) my drive so I have another one in case the drive craps out. There are no recorded events on the drive yet, I just want another drive...

the black UHF key didn't work. I DID get it to work, but only with the Blue UHF PRO #2 key. Thanks a million for all your help! Happy New Year!

Hi, tried both. The uhf feature was already enabled on TV1. It does not work with the black key on uhf. Pressing record while in system info didn't change the green lit TV1 icon. Any ideas? Do I need to buy the right key? I have lots of 6.2 remotes, I hate to have to buy new ones or throw...

yes i did that. I will give it a try. leaving for holidays tonight, probably try it when I get back. Thanks for all the help, Have a Great Holiday!

If I knew what the switch config was I could just open the remote and switch the switch to the right position, forget the key!

I tried the black, it doesn't work. no i don't have that one. What color would that one be? Blue maybe? All of the blue ones are labelled "UHF Pro 2"

thanks for your quick reply. Some of the UHF Pro 6.2 remotes I have contain a Green "1" key, and on the other side a black one labelled "UHF". For the 510 it does not matter which was the key was inserted. Other remotes have a blue key marked "UHF Pro 2" and on the other side the key is black...

Hello. I have been upgraded from a 510 to a 512. My 510 receiver used a dish 6.2 UHF Pro remote control. I have many spares I would like to use. (long story short, we purchased a bunch of the 6.2 remotes because my wife and kids have a habit of dropping them) I understand the 6.2 remote is...

From what it looks like, my locals are on both 61.5 and 110. I don't need HD so can I just keep the existing 119/110 dish 500 setup? I tried calling dish today, got their tech support. It is almost IMPOSSIBLE to get a straight answer from their "Tech" guys. Basically if I am not interested...

Yes. That is what i was worried about. It's impossible if its 61.5.