Search results for query: *

if there is a separator in the wiring panel then ther are two lines going to the 622 and yes the separators are necessary when you have DPP equipment like you do

you no longer need the 148 dish for locals

i havnt heard anyone asking if you have checked to see if your electrical outlit is pushing more than 110watts to the 622 because that will cause all of the problems that you are saying. you can get new software and have a perfict install but if you have to many wats going to the 622 then it is...

i was looking at the super sat buddy because they seem to work good with wildblue atleas what i read suposibly you dont have to run lines to the modum first you just through the dish up use the adapter and the meter and sight it in it even tells you the settings for the different sats you...

that would be a 1000.2 LNBF:D

I have never seen latino in HD and i have a install tomarrow for the HD equipment and the customer just has the regular latino pack and does not speak english I do not see any HD packs on the work order:rolleyes: HMMMMMMMMM

if you get a good tech that will take his time he will fix the problems and then you should be happy but if you get some jo blow that has only been ther 3months or a tech who just dont care than it sucks to be you(no affence)

i am a dish tech and every HD instilation is supposed to have a HD componet or HDMI with DVI addapter Installed by the technician Contracters have to pay out of pocket for them so they might tell the cust. they have to buy one and corp. techs are supplyed by the company but half the time it is...

bad equipment insted of finding the problem and fixing it he gave you the new system it is the best thing to do but he cant tell you what the problem was because he did not trouble shoot

Sadoun is #1 SatHawk & BIRDOG reseller in the country.  read about the meter befor you buy it and you dont need a fancy one for home use dont wast your money

What sats do you have and HD locals do not come of a dish they come off a high powerd off air intena and you have to be within range of the broadcasting network

go find a cheep 12 dollar signal meter and then you dont have to set behind your dish hour after hour wanting to kick it

there is a insect forum like this one for DBS with a buch of board spider genusis i didnt feal like becoming a member but if you want to know bad enough go there and sighn up they will tell you everything and more about it

if you have a 1000.2 than there is not a 44switch. when you take the seporater off and test it what you are doing is resetiing the matrix and then when you retest it the recevior is seeing the sats again when you are turning the recevior off the recevior is becoming blind its hard to say why...

you really shouldnt have a DPP twin on a dish 500 if you have a 44switch it should be a DP quad, twin, or 2 duels

It sounds like you might have a bad port on your 44 switch but i could be something in the line. the power insurter will need to stay powerd up for port one of the 44 switch if you do not the switch forces the receivor to push more power and will kill your recevior and you shoud have the power...

Home > The Animals > Spiders > Australian Spiders > Red-back Spider Scientific Name: Latrodectus hasselti The red-back spider is closely related to the black widow spider of the United States and the katipo of New Zealand. The female...

if the receivor does not have a sat in the check switch screen you might not see the signal on the reveivor even if you are hitting the bird. You might try a cheep meter. And you also might have some bad equipment

it will be the governments excuse to raise gas another dollar and no one will ever see the converters

I have used a channel master for many years and they work fine, they are not very accurate with DPP but it will get a signal. I wish it was a little better built, those little dam screws fall out and then the battery bounces around and tears up the insides of the meter. I am looking for a meter...

The signal is an average from all the transponders ones you use and dont use it is very anoying

where are you located and a remote technician works five days a week at least in my area