Search results for query: *

All three dishes are 90cm. 2 are WSI and 1 Fortec. Waiting for that new Geosat one from Satellite AV.

Everything fine now just had to rescan now all channels back. I leave the Fortec on all the time. So something must have got messed up. Just have a three dish setup for 83w, 97w, 125w but now don't get PBS due to I only have a DVB-S unit. But thanks for the help.

Went to watch RTN today on 83w and all three channels are showing PBJ. RTN & Tuff TV gone? Anybody check it out and let me know if you are getting the same thing.

Leeche Lake, I have a Westinghouse TV too. They are a Sony on the inside and Westinghouse on the outside. Try the codes for the Sony. I have a VIP622 with a 5.3 remote. Musher

SATire good luck but I live near Milwaukee and I'll have some work for me this weekend cause my dish is on a ground mount with bricks holding it down and well it was on it side, not much damage but will look it over this weekend once the wind stop blowing. I'll have to re-set everything. Musher

I having the same problem with the pip one side looks fine and the other side looks like strechted verticaly even for HD. The other problem with L630 is that my OTA tuner seems weak now. Most of the time I was getting 100% before and now I get 60-70% even with big antenna's that still work...

What I remember about autumn is pulling out the training rig to start running the dogs to get ready for winter on the sled. The cool and cold mornings are the best times to run. The dogs see those harness they go wild and can't wait to go for a run either, try holding back 8 Alaskan Malamute's...

carlospr43, there was a couple of ther site's but they shut down on their own. Found this one listed on the freedbs dot org site and checked it out and now its the only place I found. Mine is used through the loop out of mine Fortec. Just helping out. Musher

goto simplefta dot com and look there, i found it there and they do have some third party firmware too but be carefull with that. Musher

Just re-scanned some of the sat's and found on 97.oW Safe TV Slate with the GloryStar logo on the bottom left. 11929 V 22000 and are asking for donation's and are try'in to get back on the air and satellite. Musher

Just helping out, cause I did the same thing when I first set up my dish and looked around at pictures and posting here and all the help I got from everybody!:) Musher

stanleyjohn, goto the wsi website an look up the dish WS9036 and scroll down till you see the pic's of the dish and click on the middle one and look at how the lnbf bracket is mounted to the arm. I'll get some pic's of my set up at first light tomorrow. Musher

Outbackjack, nice pics of your set up! But there is one thing wrong with it, the lnbf bracket is in the wrong spot. Look at picture #2, it is on top of the arm and it should be on the arm so the lnbf is not on the sweet spot of the dish. That means you might have to reset the dish a little...

I have an N-fusion HD and its a total joke and took it outand went to a Fortec. The DVB-S2 is only for Dish/Bev. It has NO Blind and dose not work well with a motor either. If you have fixed dish set up using switches it works fine other wise don't buy an N-fusion. Musher

Well I checked the setup and it was leaning forward so is was no longer plumb. So I put some shims under the temp mount that it is on and almost all SQ came back up even on 101 History is now at 60%. Will check back later in the day and tonight also. Its been so windy here in SE Wisconsin...

Ok then I need to look into it deeper. I do get 3ABN fine too on the Dynamic but its been like this since I went from the fixed setup to the motorized setup. The fixed setup was 89-97-101 but 89 and 97 are coming in lower too and some tps on 97 don't come it at all now like 12084 V 22000 and...

Any body having trouble with some channels. Tps 12033 H 3003 SL 85% SQ 50% but many others don't come in like 12060 H 26700 SL 40% SQ 0% but during the day somewhat OK but at night nothing. Musher

You can set limits in the receiver menu, for East and West. I bought the SG9120 to replace a Sg2100 and there is "NO" play or slop with SG9120 unlike the one with plastic gear. I mean the dish moving when its windy. I will tell everybody to buy this motor. Just my 2 cent's and yes it came from...

Thanks, I know there is a lot on the C-band side and want to join in too. Also looking at the Azbox Premiun HD it only comes with one tuner, but looking I found an online retailer in Europe that you can buy the box with 1 or 2 DVB-S2 tuners. But they do sell just the tuner for 59.00 Euros...

Well that is the question? First I do have a working system Ku-band only with a Fortec Dynamic sg9120 motor 90cm dish invacom snh-031. Working fine but I want to add the C-band side to my viewing pleasure. I do know I will have to get a 1.2m dish and either a dmx241 or GeosatPro C2 C-band...

Tron, nice pic's of the stuff! I ordered one the those Powermax SG-9120 motor's and put it up and I will say this about it "100% Rock Solid". I had a SG-2100 and it had a lot of play or slop in it and the 9120 dosen't. It has been windy (gust up to 30mph) and the dish didn't move at all while...

brentb thanks for the info, so it is AC3. AcWxRadar, After pounding my head against a brick wall and almost through everything out into the trash I had the time this week to do it. I feel GREAT!!:D The best and biggest advice I can give is TAKE YOUR AND GO SLOW AND COME HERE AND ASK ALL THOSE...

Hey thanks for the input, right now I have a Invacom SNH-031 LNBF on it. I did buy one but not up yet wanted to know first. I do have a problem at 125w, I get NO audio from 12180 V (PBS World) do I need an AC3? Musher

Yes! I did it and it works, I got the new motor up and running and get 74.oW all the way to 125.oW. The motor is a SG9120 Powertech from WS International. But the only problem I had was that my Nfusion HD receiver was moving the motor but would not stop and lock. So I went and got the Fortec...

oppxg0, I too have a N-fusion HD and a SG2100 motor and mine did the same thing. When I set up the motor worked and then DEAD. Also it would not pass the the signal though the motor from the lnbf to the receiver. The new motor came friday and will get it put up this week and report back. You...