Search results for query: *

Regarding the LOS for Dish, does anyone know if a flagpole (3" dia 1/4" thick-wall, oil drill pipe), placed within 20-25' of the dish would impact the signal reception? Thanks

Is it possible to remove the HDD from a 622, put in an enclosure, and then connect to a Hopper 3 via USB port, and use as an external HDD to access the recordings already on the drive? Anybody done this, or does it seem feasible / plausible?

Fist Strike FS1 - Apparently, it needs all of the parameters to obtain a lock. I've got F and SR. ICE just posted the LO for the LNB, and advised of the 22K setting, so I will try that and see if it gets me where I need to be. ICE - can you confirm that the LO for the EA 1.4k LNB is 11250...

Thank you much ICE, for the above. I will head over to Lyngsat and see what is available there.

The particular meter I have allows to enter the parameters that I am looking for, in order for the meter to correctly identify the satellite being hunted. With the satellite specific parameters, the meter will only identify one bird in question, and will not give a false positive ID.

Thank you for that additional information, do you have any of the parameters that I am requesting? Or can someone else please provide? Thank you.

Can anyone provide me with the following information? or point me to where this information is up-to-date. I greatly appreciate your kind assistance! For each of the current E* satellites 61.5, 72.7, 77, 110, 119, 121 (I've heard information (from a E* installer) that 77 is dead, and no...

Something just happened to my TV1 out from ViP622. My everlasting and current setup is HDMI to flat panel TV1 using a 5.3 IR remote TV1 coax out to a mirror image in the bedroom, using a 6.3 IR/UHF Pro remote using the green 1 tab TV2 coax out to the daughter's bedroom, also using a 6.3...

Retail installer changed out my D500 to EA 1000.4 today. I live in MI, and am wondering what range of signals anyone else in the MI area is receiving on their EA dish. On my old D500, I was getting >=75 on both 119 and 110. Now I know that certain sats may emit varying degrees of...

Good to know. Thank you all for the updates and info.

A list confirms removal of 9393 from 61.5. Can anyone confirm that 9393 has moved to 72.7? They are sending someone to erect a 1000.4 on Fri, due to a call I made because I couldn't receive 9393. But if 9393 isn't available at all, then the 1000.4 will do me no good. Thanks

I've been receiving 9393 from 61.5 for quite some time now (unless they just moved it to 72.7 in the last few days) I've got a 61.5 wing to D500

9393 3ABN for one (since Sun afternoon) I'm not in tune with which channels come from which birds. If you could provide me with a few channels that are on 61.5 with the Dish Family pkg, I'll check them and get back to you whether or not I am receiving them. I've got the DF pkg with Flint...

Any idea what the 'other problem' could be? As stated, I have a good check switch and signal from 61.5. The dish is solid and hasn't moved, been hit, budged, etc. If the LNB was bad, I would assume I wouldn't get a lock and signal, and it wouldn't show up during the check switch test...

Receive a good check switch and signal from 61.5, but still no PI / locals off the bird. Is it still down from the weekend? Anyone else receiving any 61.5 channels? Which ones? Thanks

I've only got the single Vip622, nothing else.

Do the same channels (SD and / or HD) come off the EA dish, as do from the D500? I guess my answer to your question is...I don't wish to lose any channels that I am currently receiving from the D500. If the EA dish transmits the same channels as the D500, in addition to the HD channels...

Current setup is D500 and D300 toward 61.5 winged to the D500, all going to a DP34, and into ViP622 E* wants to replace my 61.5 with a Eastern arc TurboHD due to them stating that sooner or later, 61.5 will not be used; and they are doing this free of charge (this is all as a result of the...

Is this going to essentially resolve? After speaking with CSM and explaining my problem, and going through all the normal troubleshooting, they want to send out a tech to see what, if anything can be wrong, and if there is a resolution. I am wondering now, if it is worth the effort to send...

How does that effect channels that are coming from the 61.5? All I have is 110, 119 and 61.5.

Woke up from my nap today, and my wife states that 3ABN is gone. Not on any channel list in the guide; no slot on All Channels or All Sub for 9393 3ABN. Could some of you others check to see if you have 3ABN, or if you did, is it now gone? I had retained the Dish Family pkg when they...

I've had two 622s replaced over the past 3 years or so, and each time, it was delivered within a couple, not more than three days. Each time at no cost, and I've never had the DHPP. And I can't figure why they sent them 'no charge,' because I bought the original one that went bad off of...

Can an eastern arc 1000.4 be winged to a Dish500 with a DPP LNB? or vise versa? Receiver is a ViP622. Can the two dishes be ran seperately to a DP34, and then twin lines to the dual inputs of the 622? Doable? How?

pick up FM radio reception? Could 2-way coax splitter be used to run a line from the coax out of the receiver to the coax in FM port on a home theater stereo? Would there be any type of increased FM signal with the combination of the dish and the ambient electrical loop of the house...

Have a 622 with three sets connected; Set 1 is HDMI at location of receiver (TV1), remote #1 5.3 IR Set 2 is coax to TV2, remote #2 6.3 IR/UHF Pro Set 3 is coax to a remote TV receiving TV1 signal (mirror), remote #1 6.3 IR/UHF Pro Set 3 has the UHF remote setup so that we can watch TV1...