Search results for query: *

Or you could order a SA tivo remote direct from Tivo for $35. I have a SA tivo and a R10 and the SA remote works on both. The only different is the TV pwr button is on top instead on lower left of remote. http://www.tivo.com/2.7.1.asp

I have a Directtv tivo but have a second SA tivo(with lifetime) I have that I had before I got Directtv and it works great with Directtv. The SA controls the directtv receiver.

I have two d10-100 and they both work with the low speed data port. (with a SA tivo) The D10-200 and 300 don't work)

Which fringe areas

Good luck. I switch 6 months ago and have no regrets.

120 volt outlet consist of three prongs 1. short rectangle slot is hot or the 120 volts(suppose to be black wire 2. long rectangle slot is neutral wire which is the 120 volt return. Should be white. 3. The third prong(semi round) is the ground . This wire is usually a bare wire or sometime...

Same here I have a run that is about 250 ft with no amp. Not very often but on occassion I will have the even tranponders go out and I will have to go out and fiddle with the conectors.

In the pass if you signed up for the service you had to wait 30 days before you could use it.

The D10-100 is the only one of this series that works with the serial bus.

Everything just find here in Central Texas also.

If you have a D10-100 the serial bus works. It's not as fast as I would like it but it does work now. Tivo put out an 7.2 update that fixed some of the problems with the serial bus that Directtv screwed up. It's kinda a long thread but check this thread out over at Tivo Community on the...

Don't shoot me if I am wrong but I beleiver the SD tivo is also considered advance equipment and will require a 2 year committment. Let me know if I am wrong.

He should have given you a multiswitch with enough ouputs to connect up all of you receivers input which if I count right should be 5. How handy are you with tools. You should be able to do the rest of installation your self if you have a drill. If he didn't you should have them come out and...

Don't think so 30 min is what you got.

Same here. Don't know exactly but it is a little over 200ft and working just find. I know it's a bit much but I have five splices in this run.

I have a Dtivo(R10) How do you get signal strength meter to come up without going thru all of the menu's

Thanks much everybody.

Yes I know this but can the elevation and azimuth be adjusted to compensate for this?

I just converted to D* a couple of months ago from E*. They installed my D* with just an 18 in. dish. My E* dish it looks like it's 22".My question is if I took off the twin E* lnb and installed a dual D* lnb would this screw up the focal point of the E* dish. I notice that the twin E*...

If you order from D* the first dvr will be $99 dollars with $50 rebate. 2nd and third will be $99 no rebate. There will be $4.95 tivo charge per month to include all dvr. There will be $4.95 charge for each additional after 1st receiver.consider dvr as one receiver. Yes all dvrs are 2...

There is no update still broke. D* is aware of it but that is all that can be said. Check this tread out. http://www.tivocommunity.com/tivo-vb/showthread.php?t=241518

This is what I thought. Guess I will be shipping the D10-300 back and keeping my D10-100. Also I have a SA tivo that I am using and somewhere I read the D10-300 doesn't have a serial bus to change channels. I know the 100 at present has problem with changing local channels with serial bus but...

They thought that my D10-100 was def and they shipped me a D10-300F which one should I keep.

Thanks I fixed my problem. You won't believe this but was bad connector that installer put in at entrance to inhouse cable. Thanks for help.

No odd transponder. I check the signal strength and odd is 0. What could be the problems. I have two D10. I switched the coax from dish where it comes into house and the trouble stayed with the same D10. So I know it either the inhouse cable or the D10. Which voltage does the odd use 12v or 18...