I've got a quick question about this setup.
Currently, I have a fortec Classic hooked up to a HH120 and then BSC621-2 (22mhz). Slaved of the Classic NA is my twihan card, which has a GI2650R slaved off it.
On the side, I have now a Fortec lifetime Ultra (freebie

) to replace the satpro rec for IS-9 and AMC 6 (both universals now; disqec).
What I'd like to do is find a way to hook up the IS-9/AMC6 to the Twinhan incase a 4.2.2 or HD feed shows up on those sats (and to stream a channel to myself at work).
Running cables out to the 120cm so all 4 sats are off the same disqec before the motor is not a option right now.
So, I was wondering this: Does the loop out port on the Fortecs block incoming 22mhz and disque commands when the receiver is on? If so, couldn't I put a 22mhz switch for the two fortec loop outs to the twinhan? If the loopouts don't block it, what about a DC block instead of using the loopout?
The 22mzh tone from the twinhan wouldn't pass the switch and the receivers would be providing LNB power and switch control.
Is this crazy?
