Social Feed

J
Last reply · posted in Free To Air (FTA) Discussion
I found two type of two way splitters out there:

A) All Port Power Pass
B) One Port Power Pass (second port DC blocked)

Just wondering, if anybody took any of this splitter a part by removing rear cover to see what is inside ???

My best guess is , that :

"A" has two diodes with their positive (anode) is connected to each of the output ports (the two receivers) , so when they send a positive voltage, it will go through to the LNB,: and the two cathodes (-) of the diodes are joined together at the input port (LNB)

"B" has a diode and a capacitor inside, with the diode + (anode) connected to the "power pass" port , so the reciver's positive voltage wil go thru;
and the capacitor is connected to the other port (DC block), so only the signal will go through, not voltage; the other sides of the diode (cathode -) and the capacitor is joined together at the input (LNB) port

Could anyone verify or dismiss my theory, and share any related experience??Thanks!
11 Replies · 22490 views
J
How to build a $1.14 splitter

Thanks for all the info, so I went ahead and built one $1.14 "all port power pass" splitter.
You may ask why $1.14 : $1.00 + 14% taxes (Ontario/Canada)
(see attached photos)

It works as it supposed to be , both receiver can power the LNB.

Will be using on 123W and 30W, both has all the channels i care for is on the "V" polarity, so there won't be any conflict if both receiver is on, and tuned to the same sat.

It is definately an easily do-able project for anyone who has some previous electronics experience and already owns a small soldering iron, and has some loosed diodes + capacitors (they could be recycled from any old/defective printed circuit boards.

Building a "one port power pass/one port DC block" is even simpler, since one side could be connected with a straight wire (DC power pass) and the other side with a capacitor (DC block/signal pass)
Anole
what's the big picture?

I don't quite understand what you are trying to achieve.
You have two receivers, two satellites, a splitter, and only one dish/LNB?
Ya gonna go outside an move the dish between two birds that far apart when you want to change satellites? :rolleyes:

Or maybe you really have two dishes (each with an LNB) and some other switches...?
Although we were dealing with the fine detail of your actual question in the thread above, if we knew your overall goal, there might have been some better answers.

I'll guess you built two of the adapters described above, hooked each to a separate dish/lnb, and also to a 2-input switch connected to each receiver.
The proper solution would have been to use two dual-output LNBs, in this case, but you're adding a 2nd receiver and trying to avoid swapping out the LNBs... ?
Is that about right ?

Let us know how this all works out. :)
J
Splitters

I have two 33" dishes and a 24" starchoice dish, pointed to 123W, 97W and 30w, .......but they ALL have only a single output linear LNB and I want to connect them to two receiver (thru a 4x1 diseqc switch)

Of course, I could replace all three single output LNBs with a dual output LNBs, but buying three dual output linear LNB would be a somewhat expensive , plus I would have 3 extra single output LNB for ????

Here comes the $1.14 splitter into the picture: By making three of these splitters for a total of $5.00 and my problem gets solved.

There is only one small limitation, when both receiver is ON, both must be on the same polarity, otherwise it will create a conflict between "V" & "H"

However, this is no problem, since the majority of the channels we will be watching are all on "V" polarity (verified on Lyngsat)

I think we discussed here "splitters" in the most deepest details, more than the avarage sat users needs/wants to know about them.

Thanks again for everybodys very useful input !
Larry1
The satellite splitters have a ferrite bead with wires wrapping around the bead. You have the spitter only about half completed. The diode is used to send the dc only in one direction and prevent it from going down the 2nd output. You can use a 1N4148 signal diode. It will pass enough current to operate a LNBF. The capacitor is used to pass the high frequency signal. Take a look at some of the Dollar Ttores for the $2.00 (CAN) satellite splitters.
You need the ferrite bead and the coils of wire to maintain the impedance. Remember you will also cut your signal in half, 3 db loss (plus connection losses) when you split the signal. You should end up with about a 3.5db loss.
T
The satellite splitters have a ferrite bead with wires wrapping around the bead. You have the spitter only about half completed. The diode is used to send the dc only in one direction and prevent it from going down the 2nd output. You can use a 1N4148 signal diode. It will pass enough current to operate a LNBF. The capacitor is used to pass the high frequency signal. Take a look at some of the Dollar Ttores for the $2.00 (CAN) satellite splitters.
You need the ferrite bead and the coils of wire to maintain the impedance. Remember you will also cut your signal in half, 3 db loss (plus connection losses) when you split the signal. You should end up with about a 3.5db loss.

That's one of the reasons I was talking about winding a torrid / balun (ferrite bead) this will keep the impedance at 75 ohms. If he changes the impedance he will have a higher SWR and alot more attenuation.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
Our DNS provider is encouraging us to enable DNSSEC on our domains for added security.

I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.

Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.

But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past. :D
1 Replies · 6 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Doing my checks it appears the changes have gone through... and we are still here. (Phew!)
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
Due to security concerns and the fact that the Tapatalk Plugin for Xenforo is no longer being updated we have removed Tapatalk support from SatelliteGuys.

For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)

add_to_home.gif

Thanks for your understanding. :)
7 Replies · 167 views
Foxbat
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
dweber
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
  • Like
Reactions: charlesrshell
Peter Parker
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
Hooray!
  • Like
Reactions: charlesrshell
Peter Parker
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Do you mean the safari browser?
Foxbat
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Actually, PWA stands for "Progressive Web Application" and is basically just saving a site's homepage to your desktop where it appears as an "App" with the rest of your smartphone's Apps.
1781162703297.webp
  • Like
Reactions: charlesrshell
Scott Greczkowski
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.

TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.

In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.

Screenshot 2026-06-11 085611.webp



In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.

Screenshot 2026-06-11 085641.webp


And here was the cost of the Premium Tier.

Screenshot 2026-06-11 085701.webp


Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.

Screenshot 2026-06-11 090141.webp



So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.

Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.

In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.

If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.

Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.

I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]

The above link also explains PWA's better as well. :)

If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.

But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. :) Please give the PWA a try.
NYDutch
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.

TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.

In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.

View attachment 191729


In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.

View attachment 191730

And here was the cost of the Premium Tier.

View attachment 191731

Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.

View attachment 191732


So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.

Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.

In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.

If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.

Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.

I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]

The above link also explains PWA's better as well. :)

If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.

But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. :) Please give the PWA a try.
I just installed the PWA on my Android phone. It was pretty easy to do, and now I'm posting this from my phone. Thanks, Scott!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67104 Replies · 2662245 views
  • Like
Reactions: c-spand
long_time_DNC
King Of Pain - The Police
H
Haven't Got Time For The PAIN-Carly Simon
  • Like
Reactions: ClarkGable
ClarkGable
No Time - The Guess Who
  • Like
Reactions: sdfntx
harshness
Time After Time - Cyndi Lauper
sdfntx
Right on Time - Brandi Carlile
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
As you may have noticed we are doing a Fund Raiser for SatelliteGuys!

As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.

I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)

Anyways... if you would like to help out please click the link below.


Thank you in advance. :)
18 Replies · 549 views
Scott Greczkowski
I planned on removing it today, but then my fathers car broke down and I had to drive him all around to get his stuff done. Then I had a doctors appointment after that which was annoying...

Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.

Anyays I hope to get rid of Tapatalk tomorrow. :)

And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.

THANK YOU, THANK YOU, THANK YOU AGAIN!
T
Yeah, dr's...joint pain? Your joints are wearing out. It hurts when I do this...don't do that
comfortably_numb
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old

No excuse for a flippant response like that from a doctor! I'd be looking for a different one.
Scott Greczkowski
Tapatalk has been removed.

I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along. :)
navychop
😍
  • Like
Reactions: charlesrshell
Scott Greczkowski
We got more kind donations yesterday! Again a very big thank you to everyone for your support!
  • Like
Reactions: charlesrshell
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Sports Section
111 Replies · 2720 views
  • Like
Reactions: Foxbat and meStevo
Foxbat
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
Y
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
I heard on the radio, after the final pitstop, Turner Motorsport were resigned to second place. 'You're in second. Don't worry about it. First is McLaren, we aren't catching them.'
  • Like
Reactions: Foxbat
Y
Caught up to the 500... err... k in St. Louis. What a race! Andretti Motorsport were doing very well with Ericsson and Kirkwood, meanwhile Power was moving up the grid. Veekay started cautiously. He was working the tires just right, becoming more lethal later in the stint. Rasmussen was racing likewise, not nearly as insane as he has in the past. Palou was leading the race, in a shocker to all. Caio Collet was having a wonderful ride, making Ferucci potentially sweat a bit. Rain came, rain went, rain came, rain went. Generally mild sprinkles, but enough to pause racing on an oval.

Palou would kind of send Siegel into the wall. Siegel really didn't do much wrong. As he noted, you have to turn at some point. Palou had acres of room below and Siegel might have had his ticket out of Indycar stamped. Dixon was doing the fuel thing and got busted twice by yellows, not pitting before the flag came out. Then the most critical happened... Palou ran out of gas on pit lane, effectively giving Newgarden the race lead and win. Newgarden had a very early pit, so he was able to slide in, get service and go. Meanwhile, everyone else was confused and stuck behind Palou for a bit. Once people figured what was happening, Newgarden had a major advantage of several seconds. Newgarden wouldn't look back and when it went green again, he'd hold the lead for the win.

Massive credit to Juncos Hollinger who bested Penske in getting Veekay out before Malukas in a transition that was oddly bizarre. I haven't had time to check, but I'm wondering if Veekay was about to run out of fuel or cut a tire. He was charging late in a stint, got up to fifth, and then tailed back for a few laps to 10th or 11th. It looked like it was over. Went into the pits, and after the pitting sequence was over, Veekay was well inside the top ten again. It was weird. And he charged, getting up to fourth. He made a late move on Rasmussen, but Rasmussen held his position with some great driving. In fact, there was a ton of incredible racing passing, not passing all race long. Veekay would finish 4th. A podium would have been awesome, but it is a great outcome for a guy who hopefully will get a break with a big team. We saw what Veekay could do with a Honda last season with fuel save, imagine replacing Simpson on Ganassi and having speed to go with fuel saving. His 6th at Indy and 4th at St. Louis get him up to 13th in the points standings and only 5 points outside of the top 10.

Ericsson finished second, resigned to finishing behind the current best in the world guy on a short oval. Rasmussen got the final step on the podium, a nice rebound to what has been an otherwise bad year for him, and a good reward to ECR who just extended his contract.
Y
They raced USAC cars at Daytona once. Once! People died. Aj Foyt said 'f this', and left after the first go around. AJ freaking Foyt thought it was crazy! And cars weren't nearly as fast as they are now.

I think they tried Talladega once too.
Y
LeMans qualifying on going. WEC has d9ne a great job expanding the automotive company entries. Even without Porsche, a large nunber of manufacturers.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have had good experiences with Brave but lately I am frustrated with it.

Now when I launch the app it shows a box at the bottom asking if I want to go back to the last opened page. It is in conveniently located and I would prefer to eliminate it.

Does anyone know how to do this?

Please let's not sidetrack the discussion into an exploration of why I don't care for it or a lecture about all the wonderful aspects of the feature. I just do not care for it.
3 Replies · 66 views
b4pjoe
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

Screenshot 2026-06-10 at 6.46.20 PM.webp
Peter Parker
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

View attachment 191721
Thank you for trying to help. However thrse choices do not appear in Android. There is a setting for "New Tab Pages" that is similar but does not include your choice. I have tried all of the existing entries with no success
  • Like
Reactions: b4pjoe
Juan
Something like this maybe


Option 2: Set a custom Home button URL
  1. Click the menu icon in the top-right corner and select Settings.
  2. Click on Appearance in the left sidebar.
  3. Toggle on the Show home button switch.
  4. Under the home button settings, select the option to Enter custom web address and type in your preferred website. [1, 2, 3, 4, 5]
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5346 Replies · 509283 views
osu1991
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
dfergie
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
There are some really good movies on youtube.
Saving Private Ryan 4k, Dolby Atmos...
harshness
Saving Private Ryan 4k, Dolby Atmos...
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
dfergie
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
I went with my 4k disc after checking out that version.
osu1991

View: https://youtu.be/I68627xyDPA?is=gUZB0Yv_08pE0DR3


Tonight revisiting one of my favorites. Ranks up there with Star Wars, Raiders of the Lost Ark and Hunt For Red October.
dfergie
Watching Monterey Pop, been awhile, had the DVD, but probably lost in the fire 10.5 years ago. HBOmax
"MysteryMan"
813WnPwdB3L._SX342_.webp
  • Like
Reactions: dfergie
S
· posted in FTA Manuals Section
Looking for a manual. Want to do some radio astronomy with it. Realize it's old but, since it's not for tv use don't need any decoders, just the RF section.
0 Replies · 16 views