Social Feed

R
Last reply · posted in DISH Network Support Forum
Ok guys, any help would be greatly appreciated. At our tailgate this weekend we could only lock 119, and despite massive efforts could never even find a signal for 110. Now that being said, we did keep hitting the signal for 129 in the process. I have no idea what 129 is for, but it really doesn't matter. We have had no problems in years past on this setup. The setup includes a dish 500 dish and a dishpro plus twin LNBF. It was my understanding that no switches, etc are necessary with this LNBF, but I could definitely be wrong.

Thoughts??? and Thanks in advance, you guys usually know your stuff!
3 Replies · 1452 views
boba
Ok guys, any help would be greatly appreciated. At our tailgate this weekend we could only lock 119, and despite massive efforts could never even find a signal for 110. Now that being said, we did keep hitting the signal for 129 in the process. I have no idea what 129 is for, but it really doesn't matter. We have had no problems in years past on this setup. The setup includes a dish 500 dish and a dishpro plus twin LNBF. It was my understanding that no switches, etc are necessary with this LNBF, but I could definitely be wrong.

Thoughts??? and Thanks in advance, you guys usually know your stuff!
If you did a search you would probably find this question has been asked many times.
110 & 119 are 9 degrees apart 119 & 129 are 10 degrees apart and all three are used by DISH Notwerk so your receiver regognizes signals from them. The dish 500 is designed to pickup satellites 9 degrees apart so it will see both combinations of satellites. When someone is picking up 119 & 129 it usually means they are looking too far West and most of the time their elevation is also off. Depending on where you are located the elevation it is usually too low by a few degrees.:)
S
Ok guys, any help would be greatly appreciated. At our tailgate this weekend we could only lock 119, and despite massive efforts could never even find a signal for 110. Now that being said, we did keep hitting the signal for 129 in the process. I have no idea what 129 is for, but it really doesn't matter. We have had no problems in years past on this setup. The setup includes a dish 500 dish and a dishpro plus twin LNBF. It was my understanding that no switches, etc are necessary with this LNBF, but I could definitely be wrong.

Thoughts??? and Thanks in advance, you guys usually know your stuff!

Since this is for tailgating, I would assume that the Dish is either on a tripod or a fixed mount on a camper or the like.

Make sure that:

1. The grounding of the tripod, or permanent setup is PLUMB(flat). Carry a leveler(thing with the bubble to make sure something is level) with you to make sure that your set mast(arm) is FLAT on the top, and has is straight up and down. Making sure the bubble in the level is between the two lines(you said you were a newbie, so if I am trying to explain it too you like you were in 2nd grade. Sorry if this is insulting ;))

2. Make sure the above is done, and then using the proper ZIP CODE for the location of the tailgate, set the SKEW(this is MOST IMPORTANT), ELEVATION, and DEGREES pointing direction for that ZIP CODE recommended by Dish.

The SKEW is most important to be set correctly before hand as this is specific for you to pick up 119 and 110 at the same time.

The ELEVATION ANGLE and the DEGREES POINTING angle(towards the South/Southwestern sky) should be clear of obstruction.

I use a tripod on mine, and as long as I adjust the direction it is pointing in, then the elevation, I usually fine tune it pretty easily.

They say you can fine tune it even more by adjusting the SKEW, but my experience has shown me that is better to adjust the ELEVATION angle and the direction it is pointing to get a solid signal.

I usually don't touch the SKEW as this tends to scre things up. At least for me it does. But if you want to fine tune your SKEW, go ahead.

Like the ELEVATION and direction, moving it slightly a degree or two may help even more.
highdefjeff
You were simply low on elevation and just a couple of degrees to the west of where you needed to be, just like boba said.

Your skew shouldn't be messed with - start with a plumb mast!

When using elevation numbers given for Dish Network, add 2 degrees to elevation. I believe that the scale printed on the dish units is off by 2 degrees - low. Whatever the reason, peak is just a hair shy of 2 degrees higher elevation on the dish.

If it happens again, raise elevation and move a little to the left.

To get the best signal, invest a little in a dual analog meter.

Read about it:

Super Signal!
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.


View: https://youtu.be/DRm0mbp_n1k


We've literally got a movie already about this ;)


View: https://youtu.be/a2PW7a9ViDc
65 Replies · 1105 views
Foxbat
​
Foxbat
Oops.
dishstaller
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.
meStevo
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:


In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

1792355686329.webp
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68525 Replies · 2672366 views
  • Like
Reactions: c-spand
Bobby
Mississippi Cotton Picking Delta Town - Charley Pride
harshness
Delta Dawn - Tanya Tucker
dishstaller
Can't You See - Marshall Tucker Band
sdfntx
See You in September - The Happenings
long_time_Dish
You Look Like You Love Me - Ella Langley
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
111 Replies · 1699 views
  • Like
Reactions: Jimbo and dfergie
osu1991
  • Like
Reactions: Mike0616
M
Hopefully nowhere near a microphone.
Y
Hopefully nowhere near a microphone.
After having experienced Gus Ferguson trying to call soccer games, I'm uncertain why NFL football analysts get hate. Even the "worst" of them are pretty good.
meStevo
Jalen Hurts out indefinitely as they treat and monitor a superficial blood clot in his leg.


View: https://x.com/RapSheet/status/2111074303185989663?s=20
  • Sad
  • Wow
Reactions: Mike0616 and Foxbat
meStevo
Browns lead the AFC North 🤣

Seth Meyers What GIF by Late Night with Seth Meyers
T
Last reply · posted in Free To Air (FTA) Discussion
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
5 Replies · 145 views
Titanium
Yes, many have hacked a DirecTV or Dish Network dish before. Quite undersized, but would receive the 97w KU stations with an LNBF swap. Make a template to set the LNBF face angle and distance from the reflector. Remove the current circular polarity LNBFs and make a bracket to hold the replacement linear LNBF in the correct centered position. Remember to set the polarity skew.
  • Like
Reactions: TVHabit and FTA4PA
B
would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow
  • Like
Reactions: TVHabit
O
If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.
  • Like
Reactions: TVHabit
T
I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...
Titanium
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
LNBF mount.webp
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5550 Replies · 460534 views
Bobby
Regular$6.099​
Premium$6.599​
Diesel$7.999​
at Costco, Rohnert Park.​
Bobby
Regular$5.999​
Premium$6.399​
Diesel$7.999​
at Costco, Rohnert Park.​
  • Like
Reactions: harshness
harshness
I wonder if California is getting into the Winter formula.
dishstaller
Regular$5.999​
Premium$6.399​
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.
harshness
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.
On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
Season 2 order already in hand:

'Star Trek: Starfleet Academy' Renewed for Season 2, Tatiana Maslany to Guest Star in Season 1

I've not been optimistic about this show based on what I've read so far. Seems to be aimed at a younger audience. Interesting though that Tatiana Maslany will have some sort of role.
80 Replies · 3160 views
K
I'm sure I will watch at least the first episode but I am not optimistic.
K
I'm sure I will watch at least the first episode but I am not optimistic.
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.
  • Like
Reactions: MikeD-C05
MikeD-C05
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.
Yeah, the foot stuff was just nasty. I kept thinking of how dirty her feet would get traipsing around shoe-less. Funny, I love being shoe less at home and never wear shoes indoors in my home for long, but seeing her laying on all her furniture with her bare feet hanging out just kind of grossed me out.
  • Like
Reactions: long_time_Dish
harshness
I kept thinking of how dirty her feet would get traipsing around shoe-less.
Where would this "dirt" come from? Dead skin and dandruff?
MikeD-C05
Where would this "dirt" come from? Dead skin and dandruff?
There would still be dirt ,dust in the future I am sure. So walking around the station like she did she would get stuff on her feet. I am sure the robot vacuum is still going to miss stuff, with all those different alien species running around there.
  • Like
Reactions: long_time_Dish
harshness
There would still be dirt ,dust in the future I am sure.
Where is it going to come from -- specifically?

Why do you think cleaning technology won't improve in the next few hundred years? HEPA filtration was invented as part of the Manhattan Project.
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
25 Replies · 424 views
navychop
It'll only see two EHDs at a time.
Almighty1
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

1792279578261.webp
  • Like
Reactions: charlesrshell
J
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

View attachment 194857
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.
  • Like
Reactions: charlesrshell
Almighty1
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.
It is not just a display signal as explained above. When you have the Hopper+ connected, it uses Android TV for pretty much everything except for the satellite signal which is why it uses the DISH app for the standard Hopper 3 functions. But that should not matter because in your case, CasinoH3 is the Hopper 3 with the EHD which is what you call the naughty one based on the dates you mentioned and Master Bedroom which has the Hopper Plus connected to the Hopper 3 that does not have the problem. So one way to test the theory is disconnect the Hopper Plus from that Hopper 3 and then use the EHD's connected to CasinoH3 currently to see if the same issue exists. That way you will know if the problem is there without a Hopper Plus connected or if CasinoH3 is just a bad hopper to begin with.

Normally when you disconnect the Hopper Plus, it will be 30 minutes or more before you can use the Hopper 3 again.

What you want to do is:
hold the POWER button in, not the red reset button, for about 45 seconds or so while disconnecting the power to the Plus and moving the HDMI cable and it will reboot to the normal Hopper only immediately.
  • Like
Reactions: charlesrshell
bookworm370
It'll only see two EHDs at a time.
Yes, I have only two online at a time.
One comes online, the other one consistently will not come online
  • Like
Reactions: charlesrshell
bookworm370
Yes, I have only two online at a time.
One comes online; the other consistently won't. Also, when I connect the EHD, the USB Detected status light on the EHD itself changes from Red to Green. But the Hopper (713) does not start the EHD read process. The light changes to indicate that the EHD has detected a valid USB cable, but the Hopper does not recognize it.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 11 views
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
16 Replies · 716 views
  • Like
Reactions: LQQK and reubenray
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
R
I got the 713 update yesterday.
  • Like
Reactions: charlesrshell
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
R
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
My wife mentioned that her remote is acting strange this morning. She hit FF and it went to 15x FF.
  • Like
Reactions: charlesrshell
Bobby
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
This has been an ongoing issue. A fix is coming, probably in the next software version.