A bit more progress to report:
1. Both cards are now happily detected on each reboot of the linux box
2. Even though Yast detects the 103G as a TV card and the SS2 as a DVB card, they both appear in Kaffeine as DVB devices
3. Some tuning problems were solved by installing and using my own TP freq-pol-SR-FEC files. Since these are different from TT *.ini files I created my own database application to read an export from Channel Master and write out the necessary TP files for Kaffeine. The defaults from a Kaffeine install are not very helpful and the situation is not improved by using the download updates in Kaffeine.
4. I can now get at least some channels from most sats. But not as many as with a standalone box or the same cards in ProgDVB.
For anyone who tries to follow this same path, here is my output from
Code:
# dmesg | grep DVB
DVB: registering new adapter (FlexCop Digital TV device)
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected]
cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 1 (Conexant CX24123/CX24109)...
Scanning results:
AMC 6 - not good, strong signal but SNR ~ 44%
AMC 5 - better, usually can get the NYN channels
G13 - Hot! strong signal and SNR
G10R - channels seen but lots of pixellation, not watchable
AMC 3 - poor, no channels
NSS 806 - moderate, some channels but lots missing compared to standalone box; some channels weak on standalone box are strong on the cards
Hispasat - Hot! 97% signal and 97% SNR on lots of channels, my smallest dish.
Next will be to try to resolve why some TPs are so hard to get. Maybe a poor lnb or there is some frequency adjustment to be made.