Social Feed

skottey
Last reply · posted in Cable Television and Fiber Providers
Bright House is infamous for not knowing when "new" is no longer "new." In the Tampa Bay market we got some new HD channels in December. You guys in CFL got them in February. So, here we are four months later, and the BHN website for Tampa Bay still says "Just added - more HD Channels!" and this page, HD Channel Line-Up - Bright House Networks Tampa Bay
has "new" next to channels we have now had for four months.

Attention BHN- It has been over 120 days since you added these channels. They are not NEW anymore. Add some more channels, like CinemaxHD, StarzHD, SciFI HD, Investigation Discovery HD (if it even exisits yet), History Channel International HD (if it exists yet), and many more. But your addition of History Channel HD and NatGeo HD, among the handful of channels added in December, while wonderful additions, are no longer NEW channels!

Fix the site... add us some channels!

While you are at it, I'll take Starz on Demand. Verizon Fios is coming to St. Pete in the next year or so and you really need to step it up a notch. Move more of the analog channels to digital and make some space. It takes about 5 little old ladies living on SS with their cable bills for the most basic package to equal what you get out of me every month between cable television and Internet. So you move ten more channels to digital only and free up that analog wasted bandwidth and piss off these five old ladies. So be it. There are just as many HD fans that have been faithful subscribers for over a decade as you have slowly grown your choices and have paid for your most expensive packages and added on features such as phone and Internet. We are the digital age, we are the bread and butter of your income. We are getting more choices and many will leave when Verizon comes. Give up on trying to hold onto these old accounts. Think about it... you piss off these old croggies everytime you move channels. Look at the uproar with the December channel realignment. That was insane! Tell those customers to go pound sand and focus on those of us who spend the big money and we will be with you for the next 30-50 years of our lives if you keep us happy with content. BHN- you've sunk into trying to make everybody happy while making few happy. Scrap as much of the analog as the law will allow. Tell the crybabbies to get a digital box and step into the digital age. I know they resist change. They hate it. But they need to change. You need to make the change.

Bring on more HD!!!!!! Scrap the analog!!!!!

To those with a fixed income and basic cable- You are keeping us down by resisting change. If you can't afford another $20 a month on cable, go get a first, second, or third job if you want TV bad enough. I want more HD and your cheap desire to have analog is keeping BHN from giving me more choice. They are licking your butt, and I don't know why. Maybe it is because you cry and call the newspaper everytime somebody does something you don't like.

Yes, I am bitching... but like these people... everybody bitches about something. They bitch about the government channels being moved to digital and they are the ones that bitched about an area code overlay, which due to their bitching we got an area code split here to 727. They couldn't handle ten digit dialing, and bitched enough to the point where the plan was changed to split Tampa and St. Pete into 813 and 727. All the businesses in St. Pete with 813 had to change their stationary and business cards, yellow page listings, all marketing materials, because the crybabies couldn't handle having two area codes like they do in cities like NYC.

Bitch bitch bitch! Resist change. I can bitch too! Hear me cry BHN! I'm one of the ones you make the most money off of. Follow the money trail!
14 Replies · 3238 views
stevenl
I agree with scottey. We need to start moving more and more all digital. If you raise everyones cable by 50cent it will well in cover the 20-20k people who may need that converter box. Give the first for free and charge for each additional ones. .50 per sub x 1million subs is quite a bit of money a month to cover converters...
K
They are charging like $2 a month for that digital converter.

I don't know about other areas, but here in brevard they have a digital box for $1. They serve a dual purpose. For those old tv's that can't support the digital signal and for the gov. channels that moved to strictly digital signals.

Heres the kicker, its a one time fee! You only pay that $1 at the time of install. It's not even a re-occurring fee!

So the plan is there and were already doing it here.
skottey
I don't know about other areas, but here in brevard they have a digital box for $1. They serve a dual purpose. For those old tv's that can't support the digital signal and for the gov. channels that moved to strictly digital signals.

Heres the kicker, its a one time fee! You only pay that $1 at the time of install. It's not even a re-occurring fee!

So the plan is there and were already doing it here.

That is great news.... I like that plan. They are charging a few dollars a month for the device here in the Tampa Bay market. We really need to get moving ahead with digital only. Hell, if nothing else they could cut down on piracy. I have known many people in apartments and houses over the years that have just tapped into the main line and had free analog service. If it was all digital and required a box, this would be harder to fraud. I remember when just putting in a splitter on Roadrunner gave you all the analog channels and many people just paid for the Internet... $45 for high speed and standard cable with no tax was a deal for the casual TV watcher.... considering basic cable alone was like $20-$30 plus taxes at the time.

Really... I like what you said. That would be a win-win for all subscribers. If the customer can't afford the $1, which has been subsidized by BHN already in that they are paying an installer and the box certainly costs them more than that, than that customer shouldn't have cable at all. It is $1... less than the cost of a cup of McDonalds coffee.

Anybody that bitches about this $1 plan is just bitching for the sake of bitching.
X
Have some patience. By this time next year everyone will have to have a box of some sort. Also have some compassion. I had an old lady who was legally blind and was a standard subscriber. She had memorized her TV remote and had no trouble finding her channels. The channel change which switched Telemundo to the box upset her whole world. She could not see the remote enough to know what the button functions were. The boxes provided at $1 for accessing Telemundo have no guide function and she could not have read the text on screen anyway. The whole process was so frustrating for her she finally just switched to basic only so she could retain her ability to watch tv. But this time next year she will have no choice left but to get a box or not watch TV. Remember she is legally blind so she doesn't get out much. All she had was TV and her favorite channel was Telemundo. She was willing to settle for Galavision, but soon she won't even have that. Screwing over the Elderly for the sake of change is not something I want on my conscience.
skottey
Have some patience. By this time next year everyone will have to have a box of some sort. Also have some compassion. I had an old lady who was legally blind and was a standard subscriber. She had memorized her TV remote and had no trouble finding her channels. The channel change which switched Telemundo to the box upset her whole world. She could not see the remote enough to know what the button functions were. The boxes provided at $1 for accessing Telemundo have no guide function and she could not have read the text on screen anyway. The whole process was so frustrating for her she finally just switched to basic only so she could retain her ability to watch tv. But this time next year she will have no choice left but to get a box or not watch TV. Remember she is legally blind so she doesn't get out much. All she had was TV and her favorite channel was Telemundo. She was willing to settle for Galavision, but soon she won't even have that. Screwing over the Elderly for the sake of change is not something I want on my conscience.

So let's stop the world for this one lady.

If all she "watches" is Telemundo, have somebody tune it to that station and never change channels. Problem solved.

Seriously, if she is legally blind, she MUST have SOMEBODY caring for her with at least a daily visit to prepare a meal or do some jobs for her. They can tune the TV to her station.

I don't mean to sound like a jerk but let's not stop progress for one sad case like this lady.

Like you said, in a year everybody will have a box... so let's not put it off any longer. The sooner the changes are made the better.
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
13 Replies · 218 views
Almighty1
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

1792005788136.webp
  • Like
Reactions: charlesrshell
J
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

View attachment 194781
That didn't appear on the system check I ran on it. How do you trigger that test?
  • Like
Reactions: charlesrshell
J
That didn't appear on the system check I ran on it. How do you trigger that test?
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
  • Like
Reactions: charlesrshell
Almighty1
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
The current version is H713 but many people had been having issues with versions H711, H712, H713 which includes Remote issues - both the original DISH branded remotes and also when they use third party remotes that uses IR. There is also the support for the OTA single tuner dongle that stopped working, I forgot if that problem started with H710 or was it H711.
  • Like
Reactions: charlesrshell
bookworm370
I have the same problem with 713. Two EHD's come online just fine. The other on just sits there. Multiple power cord resets and also plug-unplug the EHD on both power and USB ports
  • Like
Reactions: charlesrshell
navychop
It'll only see two EHDs at a time.
Almighty1
I seem to have the same issue, I have 3 2.5" EHD's on a powered USB hub and in the last nightly reboot, it is seeing 0 EHD's as hitting DVR is not showing any of the EHD's. I had seen between 1-2 EHD's in H713 but all 3 with H712.

What I noticed and this is not just in H713 but even many years ago is that after the Hopper 3 whether standalone or with the Hopper Plus when it boots, don't hit the DVR button until after all the EHD's has been detected or else it will not show EHD's when DVR is hit later as it seems the DVR Recordings screen cannot be displayed until after all the EHD's had been detected. Otherwise, it will only display up to the number of EHD's that had been detected before DVR is pressed.

What I noticed is that in the detection phase is that it will called each EHD as a number between 1-3. If it ever shows as 4 when there are only 3 EHD's physically connected, the one with the 4 will not how up as a EHD. Unplugging and plugging in will not fix it as it requires unplugging and wait until the Hopper 3 boots up completely before plugging them in.
  • Like
Reactions: charlesrshell
Almighty1
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
I just check my bootstrap in H713 and it says 1017, are you sure you have 1117? The dates are install dates.
  • Like
Reactions: charlesrshell
cpdretired
Supporting Founder
Last reply · posted in DISH Network Support Forum
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
38 Replies · 1782 views
  • Like
Reactions: ewindowman and LQQK
B
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
S
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
look again mine says free for 1 month
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

1792131071109.webp
S
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

View attachment 194817
wonder why it says that
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
You have a different offer that is free for a shorter timeframe which is different than the one that I and bnewt saw without defining the promotion period as I sent the question to DISH Care via Facebook Messenger and this is the response I got back 20 minutes ago.

1792177553912.webp
Almighty1
wonder why it says that
Answer 2 minutes ago from DISH Care via Facebook Messenger:
1792178974514.webp
bookworm370
Thanks, I tried it on the website first. I'll try it on the hopper
  • Like
Reactions: charlesrshell
Darrell S
I tried on Hopper last night. Many more offers than the website has. I even got 3 free months of Gallery. Only offered 1 month on website
  • Like
Reactions: charlesrshell
long_time_Dish
I got Starz/Encore again for 50% off for 3 months yesterday.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68512 Replies · 2671681 views
  • Like
Reactions: c-spand
FTA4PA
Six O'Clock News - John Prine
  • Like
Reactions: sdfntx
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
sdfntx
Somewhere in Time - John Barry
long_time_Dish
In Time - Kit Watkins
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
540 Replies · 18265 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.
comfortably_numb
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.

NGINX
The site uses Nugenix?!


View: https://youtu.be/_DhEEo5S9fg
Scott Greczkowski
Ok checked it out and for some reason the web server (NGINX) tried starting before the DNS resolver fully loaded. This is why it worked when I rebooted the machine.

Thanks to ChatGPT it had me change the NGINX config to prevent this from happening again.

With that said I can't prevent the ISP from doing emergency upgrades which was the cause of all of this.
navychop
Nature will develop better idiots.
  • Like
Reactions: charlesrshell
TRG
TRG
Nature will develop better idiots.
God help us.
  • Like
Reactions: charlesrshell
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
11 Replies · 549 views
  • Like
Reactions: LQQK and reubenray
cpdretired
Two bugs out and three new bugs in.🐞
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden
  • Like
Reactions: charlesrshell
dishstaller
Two bugs out and three new bugs in.🐞
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
  • Like
Reactions: charlesrshell
S
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden
i can still see my joey software version with H713.. i am starting to think it's time to get rid of the hopper plus. i just have 2 joey 4's and the hopper 3 with no issues. it seem like the people that have the hopper plus have issues!!!
  • Like
Reactions: charlesrshell
Almighty1
i can still see my joey software version with H713.. i am starting to think it's time to get rid of the hopper plus. i just have 2 joey 4's and the hopper 3 with no issues. it seem like the people that have the hopper plus have issues!!!
Are you talking about the Available Joey Software section which goes something like this:
Available Joey W153 W209 J613 J713 J813 K113 J913
Software
in H713 in diagnostics which is directly below the "Switch" section which is what I am referring to that should have a number starting with P which is needed for the
Hopper Plus, Joey 4 and Wireless Joey 4
or the top area where it shows what the current version of the software is for the Hopper 3?

Seeing what your Joey 4/Wireless Joey 4 software version just tells you what is the current software version already installed, until the P version(s) shows up in "Available Joey Software" section which is different for the Hopper Plus, Joey 4, Wireless Joey 4 and it will only list one for the device(s) that exist in one's own configuration which lists what's the latest available, those devices will not be able to check or update their software as it will say "Failed: No Tgt" while "Download ATV Files" in TECHNICIAN SETTINGS under tools will respond with:
"Download ATV Files 3000
This device is not currently targeted for
Android software"
as both are dependent on the P version being listed in the "Available Joey Software" section. It usually takes a few minutes before it shows up. I know with H710-H712, it was not shown and the Download ATV Files worked except since H710, even if you selected everything shown which for me would be the Hopper Plus, Joey 4 and Wireless Joey 4 versions, the first download will as a end result only download the Hopper Plus's versions even though it shows all three as downloaded based on what Available Joey Software shows which is always two P numbers P153 and P15317. After the first successful download, the next download will actually download all three and Available Joey Software will reflect that. In H708 (H709 was skipped as no one mentioned it on the forums) and earlier, it always downloaded everything selected and would show 6 P versions in the Available Joey Software area. The Available Joey Software section is how I tell if there is a newer software available for the Hopper Plus and when I see that, I do the Download ATV files first which is where I get my information to post in my other thread, "Latest available software version for Android TV devices - Hopper Plus, Joey 4, Wireless Joey 4". The Download ATV files does not do any install or update the Hopper Plus as I still need to manually hit Menu, Settings, Device Preferences, About, Software Update to update the software.

So with any new Hopper 3 software update, the first things I will check is the Notifications in Settings to see if any of the settings were reset. For the "Remote Control Mode Reminder" setting, I would try it with off, exit notifications then hit TV on the side of the remote to make sure it does not show the reminder before going to notifications andputting it back to on, exit to see if it works correctly before going back to notifications for the other settings. Then I would look at Available Joey Software and regardless if the 2 P versions, one appears to be the 3 digit major version number and the other is the full 5 digit number which is the 3 digit major version number with 2 more digits, exists or not. Attempt to do the Download ATV Software for all 3 Android TV devices Hopper Plus, Joey 4 and Wireless Joey 4 until all of them is downloaded and shown in Available Joey Software which should be a total of 6 things added. If Download ATV Software has the no target like since H713, I will wait until I see a P version before I do it.

For reference, it's in the following threads:
  • Like
Reactions: charlesrshell
bookworm370
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
Reboot just fixes it for a short time and then it's back to messed up

Try going exclusively to an IR remote and you will see the pain
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Within the last few hours as I did check earlier today when it was still missing, the Available Joey Software line now has added "P154 P15403" which is for the Hopper Plus that I have but my Hopper Plus software is still on P15317, I will do a Download Android TV (ATV) Software for the Hopper Plus, Joey 4 and Wireless Joey which are all Android TV devices and then manually do a check update on the Hopper Plus to update the software shortly.
  • Like
Reactions: charlesrshell
BatStang2000
This happened to me. I was outside mowing and my wife came out and said that our nieces and nephews were going to be on the Noon News. She had it on in the bedroom on our Joey3. Since they weren't on yet, I decided to turn it on in the Living Room on our Hopper3. When I selected the channel (through Dish, not OTA) the Joey3 turned itself off. When I went back to the bedroom to turn it back on, the Hopper3 did a reboot. Luckily it all finished before their story came on, but I just found it strange.
  • Like
Reactions: charlesrshell
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
brittanygarden
Staff member Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany
22 Replies · 686 views
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
bookworm370
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
GRB1959
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
Excellent suggestion.
Foxbat
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
Bobby
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
R
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
I checked this and you are correct. My Harmony 665 remote worked fine until my wife used the Dish remote. After the Dish remote is used I have to push or hold a button down until the 665 starts working again.
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?
Foxbat
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
  • Like
Reactions: charlesrshell
JeffN9
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won:)
bookworm370
Excellent suggestion.
Yea, I've only been a CIO for the last 30 years! :)
Trust me, when something important breaks, they get to own it!
  • Like
Reactions: charlesrshell
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
120 Replies · 3261 views
  • Like
Reactions: osu1991
Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Foxbat
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
IMG_1535.webp
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
Foxbat
Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.
​
  • Like
Reactions: RaiderPower