Social Feed

truckracer
Last reply · posted in C-BAND Satellite Discussion
well, I was going to give up on the 621. I thought I would give it one last try. I enjoy experimenting in this hobby but this thing has got the best of me.

With the lnbf on the dish pointed at g10r ku 11800V I got on a step ladder and took a screwdriver and removed the ku part. I removed the three screws and removed the o-ring.

With a tv out back next to the dish I had the on screen signal quality meter up on the pansat 9200Hd.

I skewed the ku part a little clockwise and held the ku lnb part in the hole and watched the singal - It went up from 70 to 84! Wow.

I already had c-band skew peaked (keep in mind) on the scrambled outdoor channel.

Now as it stands the ku and c-band probes are not lined up like they were.
Theoretically the skew should be wrong one way or the other. C or ku should be wrong.

I left the focal point as it was and skew of the c-band (main lnbf body)alone since any movement dropped the c-band signal quality.

Now-I have somewhat acceptable ku across the arc and pbs ku amc-3 is coming in at 58% quality (12138V 30000). Before I had virtually no signal on this one.

SBS-6 onn went up to 82% from 70%.

I now have isolation between H and V tp's when doing a blind scan.
Before, the strong ones would scan both polarities and no amount of skew would stop it without losing signal.

I am leaving it alone but am still going to replace it with a corotor.

I am happy it is working for now.

This has been a strange lnbf. My homemade frankenstein lnbf as one of the members called it-LOL, still gets much stronger ku on my 7.5' sami mesh.
Same exact antenna as my 10' except it is a 7.5'. Both antennas are fairly new.

No additional azimuth or elevation changes peak the signal from where it is now. I am confident I am tracking the arc.
7 Replies · 1749 views
gabshere
if you could get a couple of pictures on the way you have it set now would be great

do the screws holes align back up so the screws goback in and reattach the two lnb's ??

i never thought to try to adjust the two separately , i do get better signal with c-band tuned one way but looses a bit tuning ku in ...but like you my signal on AMC3 is poor but i attributed it to my center of arc being slightly off. i shall try to do some adjusting on it next week and see what i can come up with.
truckracer
I thought my center of the arc was off too. It seemed to be where I had the most trouble with this lnbf. I don't have a digital camera (I am going to buy one-I have needed one so many times).

But I have decent ku reception now. It still is not what my 7.5' dish is getting but its not far off.

I knew my arc could not be off because any pulling or pushing up on the dish killed the signal completely or dropped to 0-2% quality on amc-3. The patient channel is a strong one amc-3 that booms in at 100% quality.

This lnbf at the factory recommended setting (The dms technical service bulletin showing how the inside probes and isolation bars look) seems to have frequency dependent problems on my dish as the frequency on ku increases the signal progressively decreases.

a signal at 11.7xx was stronger than a signal near 12xxx on ku.
Their was also lack of isolation between H and V on ku when doing blind scans and on sbs-6, ONN would scan in both horizonat and vertical 11732V 6616. I knew there was something wrong that the lnbf was receiving the same tp on both polarities.

Now I seem to have good isolation.

I still think from what I read the polorotor will give me some points better signal quality.
One member on here I can't remember where I read it-claimed the polorotor did better.

I will miss the voltage switching convienience of an lnbf. It will slightly complicate doing blind scans as I will have to do H first and flip an analog channel then do V. As where now it is pretty automatic with the dish on a satellite.

I would like to build a servo circuit to take the 13v or 18v signal from the coax and turn the servo 90 degrees. I am going to experiment as one member gave me link to a servo schematic for robots or rc cars.

I guess all servos operate on the same principle. I did see on Dave's webshop website where he had a servo tester that would send pulses for "testing" servos. I guess you could leave that think connected all the time and manually switch the servo polarity.
truckracer
Sorry this is so long-

Point your dish on a ku satellite (I used G10R Ku) equity channels.
Peak your c-band skew and make sure your dish is on the arc doing the pull up and down test to see if your signal quality changes. If you cannot improve the signal by lifting or pushing down your are on.

Peak the signal East and West.

Now switch to KU band.
Watch your signal and get on a ladder or however you reach your dish and gently remove the three screws that hold the ku lnbf on the main body without disturbing the skew or f/d.

Keep the red rubber o-ring and if it is cold, it will be a pain to get back in the groove!

You may have to slightly loosen the nut on the coax connector so the ku lnbf will turn inside the housing.

Turn the ku lnbf just a little (I turned mine clockwise) and hold it back up there into the main body with the screw holes lined up and look at your signal.


Repeat this one direction or another and see it you get decent ku reception.

Let us know how it worked for you.
After you get it peaked, carefully snug down the nut on the coax connector making sure you don't turn the lnbf from its sweet spot.
M
interesting...I might have to try that
I've has the same issues with the 621-2 and KU...but I usually use it for C-band but right now I have it on my Primestar dish for C-Band and 99 KU is at 45 on the Pansat 1500...I know it can be higher :)
truckracer
Ice,
After I peaked the c-band part, I did the above skewing the ku part of it and my ku isn't bad.
It is at a level I can live with. I will know more when we have a hard rain.

I have a 75cm patriot solid dish with an sg-2100 motor also for ku, So i will do a comparison during the next rainstorm.

Right now I have the 10 footer pointed at amc-4 ku on the 12060H 26700 (hotel cable service) scrambled channels getting 70% quality on the pansat 9200HD.

Before the skew, I couldn't even get that tp to register any quality.

what a difference.
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
214 Replies · 6772 views
  • Haha
Reactions: Mike0616
Y
So many losses this year. 3rd ranked Alabama has 2! No Ohio State in the playoff. Incredible stuff right now. Got to wonder, Wake Forest, Boise State, BYU... seem a bit misplaced, but what the heck, right? Get in with the record and see how they play in the playoff. Why should their easy schedule be held against them when other top teams are playing cream puffs too.
Jimbo
So many losses this year. 3rd ranked Alabama has 2! No Ohio State in the playoff. Incredible stuff right now. Got to wonder, Wake Forest, Boise State, BYU... seem a bit misplaced, but what the heck, right? Get in with the record and see how they play in the playoff. Why should their easy schedule be held against them when other top teams are playing cream puffs too.
Unfortunatelty, when they expand to 24 teams, your going to see 3 and 4 Loss teams get in, 3 loss for sure.

I still think they should have been Top 8 or 10 ... if your farther out, the chances of you winning enough Consecutive games against TOP teams is slim, unless you've been dropped from the upper tier after what they considered a Bad loss ...
Every team has a Bad day now and then ...

Btw, Ohio State, isn't completely Out of the Playoffs Yet, they played well last week and have the next 2 weeks to continue thier climb ... thier back up qb is starting to get comfortable ... that said, they would need to have Solid wins and help ... they would need to get to at least the #11 spot as they take away 2 spots in the top 12 for automatic bid ... Notre Dame and Group of 6, ND is playing thier way in this year, so thats not an issue, but Group of 6 is taking a spot each year without having a spot in the top 12...
Group of 6 need to build thier Own Championship series (I think it would be a Great idea)

My local team is one of those group of 6 teams, Yes they will beat a Power 4 team every so often, but do I realistically think they could win 4 games in a row against P4 teams, NO ...
  • Like
Reactions: Mike0616
osu1991
Funny Army pranked Navy by changing the seat back to say Go Army instead Go Navy at Annapolis


View: https://x.com/tom_iii_guy/status/2124177989730553997?a=8_7fh3kCVWMDKoqCLeQ&s=61
Ronnie-
Sheesh. Bad day for the Big 10 yesterday as far as playoff contenders go. They may go to having a single team in the playoffs at this point.

Interesting games however.
  • Like
Reactions: AZ.
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
7 Replies · 904 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
jsmit86
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
I think it is, but I am not aware of specific differences.
My original communication of the issue was very detailed, and they had the team work on it and felt they knew what was causing the issue.
The rollback to 708 confirmed that 708 did not have that problem.
I got an email in late October asking if I would be open to checking if a beta version had the problem. I agreed to the test, and it did not have the dolby problem.
david_jr
Not sure if it was this update or a previous one, but both my H3's had the bug where I couldn't use FF without screwing up the recording permanently. If I tried 60X for instance it would fast forward for a bit then go to the end of the recording and not let me get back to where I was trying to get no matter what. The temp fix was to use the skip ahead which for whatever reason still worked. Annoying having to skip ahead through 8 minutes or so of commercials on live sports talk recordings. Well it is now fixed, but not sure when that happened because I haven't had the nerve to try FF until this last week when I discovered it had been fixed. Working properly now on both my H3's. However my Dish Anywhere app is still not allowing me to use both H3's as feeds out. Tested this again a few days ago with my son and we both couldn't watch at the same time, even though we were connected to the other H3. If he was using DA and I attempted to use it with the other H3, it would bring up a message stating another user was using DA and do you want to take over. Very frustrating hoping they fix this soon.
jsmit86
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
I got updated to 715 last week, and I can confirm that it has solved the no dolby audio bug on 4K HDR events.
R
I got updated to 715 last week, and I can confirm that it has solved the no dolby audio bug on 4K HDR events.
When I watched the LSU/Texas A&M game in 4K HDR I was able to get dolby audio. I believe it was on ABC. I have the 715 update.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68938 Replies · 2703247 views
  • Like
Reactions: c-spand
H
Sugar WALLS -Sheena Easton
  • Like
Reactions: FTA4PA
ClarkGable
Sugar, Sugar - The Archies
harshness
Pour Some Sugar on Me - Def Leppard
Bobby
When It's Over - Sugar Ray
sdfntx
It's Over - John Mayall
b4pjoe
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
4 Replies · 51 views
harshness
Now, if we could only convince Microsoft to remove its "support" sites.
dishstaller
These companies are SO arrogant. Apple probably got pissed that regular people turned out to be more knowledgeable than the Apple "experts"....also got pissed because this community board allowed Apple product owners to figure out ways around Apple's "suggestions" not to mention all the things Apple tries to sneak in with updates.

Years ago I was on the Viasat community forum. Viasat employees were CONSTANTLY giving out inaccurate information. I would pop into the discussion and give the right answer or steer them in the right direction. I did all my own ordering, did all sales in the store, and I did my own installs and service calls so I was about as expert as you could be when it came to all things Viasat, plus I was on the dealer council. Did Viasat fire those employees since they clearly didn't understand the product or their jobs?? Heck no, Viasat booted me off the forum and blocked anyone from reading any threads that were over a certain number of days old.
navychop
No man is a prophet in his own land.
  • Love
Reactions: dishstaller
rvvaquero
No man is a prophet in his own land.
Jonathon Winters?
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6648 Replies · 382690 views
TRG
TRG
This is from earlier. I've been in a biscuits and gravy groove lately.

bng1.webp
  • Like
Reactions: Bobby and dfergie
TRG
TRG
Chorizo, egg and potato burrito smothered in green chile sauce. Coffee.

20261118_125316.webp
  • Like
Reactions: Bobby and dfergie
TRG
TRG
It is cold and wet this morning. Made home fried potatoes, chopped bacon, chopped extra hot green chile and cheese topped with two over easy eggs. Big pot of steaming hot coffee. Comfort food at its best! I think I ate a little too much though.
  • Like
Reactions: Bobby and dfergie
dfergie
2 eggs over easy on top of hash browns, bacon and hot sausage about 6 am... (cooking fettuccine alfredo pasta for lunch)
  • Like
Reactions: Bobby and TRG
dfergie
2 eggs over easy on top of fried corned beef hash patty, 1 strip bacon, 1 sausage patty... Milk
  • Like
Reactions: TRG and Bobby
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
573 Replies · 23165 views
Almighty1

I won't even consider Starlink until they deliver competitive pricing and matching performance, meaning a symmetrical 1Gbps connection. Paying a higher premium for worse speeds, less bandwidth, and higher latency makes absolutely no sense.
S
.I won't even consider Starlink until they deliver competitive pricing and matching performance, meaning a symmetrical 1Gbps connection. Paying a higher premium for worse speeds, less bandwidth, and higher latency makes absolutely no sense.
either would i seeings how i pay 29.99 for a 5 gig fiber pipe with free sunday ticket :). and i pay 19.99 for att internet air for travel. and BTW how long has elon been touting gig speeds :rolleyes: :rolleyes:
fmj77
either would i seeings how i pay 29.99 for a 5 gig fiber pipe with free sunday ticket :). and i pay 19.99 for att internet air for travel. and BTW how long has elon been touting gig speeds :rolleyes: :rolleyes:
The new version 3 satellites going up now are the ones capable of providing gig speeds. I couldn't care less about having 1 Gbps though. It's overkill for the vast majority of households.
Almighty1
The new version 3 satellites going up now are the ones capable of providing gig speeds. I couldn't care less about having 1 Gbps though. It's overkill for the vast majority of households.
Saying 1 Gbps is 'overkill' completely ignores both the physics of satellite bandwidth and how internet usage evolves.
First, when SpaceX or Amazon talks about 'gigabit speeds' on newer low Earth orbit networks, they are referring to the total aggregate bandwidth of the beam shared across an entire cell sector, not individual user speeds. Because satellite is a shared medium, that capacity is split among hundreds of active users simultaneously, causing speeds to fluctuate heavily during peak hours. In fact, for Amazon's newly rebranded satellite network (Amazon Leo, formerly Project Kuiper), true gigabit performance is explicitly locked behind their massive 'Leo Ultra' enterprise-grade terminal (measuring 19x30 inches) and tested under empty, ideal conditions. The standard residential terminal that average home users will actually get is capped at a maximum download speed of around 400 Mbps.
Second, only looking at downloads misses the real bottleneck: upload speeds. Starlink's uploads are notoriously weak (often hovering between 10–25 Mbps). Symmetrical gigabit connections aren't about overkill; they are about eliminating asymmetrical choking when running high-bandwidth applications, heavy multi-device smart homes, or massive data uploads concurrently.
Finally, the 'overkill' argument never ages well. Decades ago, people thought a DS1/T1 line at 1.544 Mbps was an absurd amount of overkill that a single household could never saturate. Then companies moved to massive DS3/T3 lines at 45 Mbps, which were meant to support entire corporate headquarters with hundreds of employees. Today, a single 4K video stream and a couple of active smart home devices will completely choke a 45 Mbps pipe. Bandwidth demands scale exponentially. Settling for lower bandwidth, weak uploads, and high latency at a higher premium makes zero sense when symmetrical terrestrial networks deliver far better performance for less money.
  • Like
Reactions: charlesrshell
comfortably_numb
symmetrical terrestrial networks deliver far better performance for less money

If you can get one. I live in downtown Albuquerque and I still don't have access to symmetrical fiber. Best I can get is 300/100 cable broadband for $40/month.
  • Like
Reactions: charlesrshell
Almighty1
If you can get one. I live in downtown Albuquerque and I still don't have access to symmetrical fiber. Best I can get is 300/100 cable broadband for $40/month.
Oh well, but 300Mbps down/100Mbps up for $40 is still significantly cheaper than 400Mbps down/10Mbps-25Mbps up Starlink for $130 as you already have 75Mbps(650%)-90Mbps(800%) more on the upload side and 75% or 100Mbps(25%) less on the download side paying 31% of the $130 price. The 100Mbps upload is already good since the best here is 1.2Gbps down/35Mbps up when it comes to cable broadband which is the best around here. 1Gbps is the minimum here needed to get anything above 10Mbps for upload and with things like DISH Anywhere and the Ring Video Doorbells that meets the 25Mbps requirement would be at 35Mbps upload which is either 1Gbps or 1.2Gbps but in reality, the provisioning is always 20% higher in speeds so 1Gbps is really 1.2GBps and 1.2Gbps is really 1.44Gbps with the upload speeds being 42Mbps in actual use provided one has a 2.5Gbps or higher LAN beyond the router/modem as 1Gbps Gigabit Ethernet will max out at 940Mbps due to overhead.
S
  • Like
Reactions: charlesrshell
JFOK
Last reply · posted in Free To Air (FTA) Discussion
Hi All,
Not sure if I've seen this mentioned here, but can kU also be affected by 5g ?
Is there a filter for this ?
I'm getting the same type of interference as I get with my CBand signal… strong signal then momentary breakup. I've tweaked the kU lnb, but there is no improvement.
Thanks in advance.
John
5 Replies · 340 views
Titanium
No. There are no terrestrial 5G frequencies within the KU band range (10 - 13 GHz).

Now, could the IF frequencies from your C-band feed be bleeding through a bad switch? Yes.

Disconnect the C-band feed from the switch (air gap it) and run a coax directly from the KU LNBF to the receiver. Is the KU-band transponders still breaking-up?

Maybe time to use a filtered C-band LNBF? Your signature shows a C1-PLL (no 5G filtering).
JFOK
Hi Brian,

I guess I have to update my signature as I bought a C-138 Red Band from you 3 years ago.
Not all my kU channels are affected, however I will try your suggestion and report back.
Thanks,

John
  • Like
Reactions: Titanium
Titanium
If your C-band transponders are experiencing the strong signals with momentary breakup, 5G type N77 High band may now be active in your area. The C240 (Blue Filter) with 4000 - 4200 MHz band pass could resolve.

Let us know the KU test results.
  • Like
Reactions: JFOK
JFOK
If your C-band transponders are experiencing the strong signals with momentary breakup, 5G type N77 High band may now be active in your area. The C240 (Blue Filter) with 4000 - 4200 MHz band pass could resolve.

Let us know the KU test results.
Hi Brian,

Was finally able to get to my kU issue.
You were right, when I disconnected the C Band from the switch I had no more break ups on kU. Now I have to seen if I have any spare switches lying around.
I may be ordering a C240 from you shortly.
Thanks again for your help.

John
4KMediaTV
Good troubleshooting — that test really narrows it down. Since disconnecting the C-band feed cleared the Ku breakups, the Ku side itself is probably fine, and the interference is getting in through the switch, as already suggested.

When you try a spare switch, a couple of things worth checking:

1. Test it with both feeds connected, then sit on the Ku transponders that were breaking up before and watch each one for a few minutes. The breakups are intermittent, so a ten-second check can easily miss them.

2. If the spare switch still lets the problem through, the filtered C-band LNBF already mentioned is the next step — stopping the 5G energy at the C-band LNB, before it ever reaches the switch, rather than trying to block it downstream.

3. While you are swapping switches, check the F-connectors on both feeds as well — tight, clean and properly crimped. A loose or corroded connector at the switch can let in just as much stray signal as a leaky switch port.

Let us know how the spare switch behaves. If it fixes it, that confirms the old switch was the path in.
  • Like
Reactions: JFOK
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5418 Replies · 514509 views
Linus Tech Tips
· posted in Linus Tech Tips
0 Replies · 50 views