Social Feed

truckracer

Last reply May 16, 2008 · posted in C-BAND Satellite Discussion

ordered a dual C and ku feedhorn

I just ordered a dual C band and dual ku band feedhorn with two Norsat 8000 c-band lnb's and two Norsat Ku lnbs.

This is I guess what you call an "orthomode" feed horn (no servo)

I am planning on running a multi-switch and going "Servo-LESS"

what kind of multi-switch do I need to do this.

I could run two seperate cheap DBS multiswitches (one dedicated to each band) or is their one multiswitch that will perform the whole job?

54 Replies · 11229 views

Load Replies (54) Reply Legacy View

Anole

May 16, 2008

A very good solution to the problem.
And a good example of "thinking outside the box".

Since these switches will be dedicated to the task, modifying them is just fine.
Of course, you cannot ever replace them with stock switches, so just keep that in mind.

This switch has an external 24 volt power supply?
I think that's a plus for this operation.

Hope everything else with this install goes as smoothly.

truckracer

May 16, 2008

Looks like he just bypassed the 13V regulator. Great idea.

That is interesting that the bullseye has the c-band probes at the same depth inside the feedhorn unlike lnbf's do. My old astrotel lnbf's have the probes at different depths with an isolation bar between them.

I do like the seperate skew adjustments from C and ku too. That would be really handy with a dedicated dish on AMC-1. You would not have compromise the C band for ku reception with this feed horn.

Can't wait to do mine this weekend (weather permitting).

linuxman

May 16, 2008

Since these switches will be dedicated to the task, modifying them is just fine.
Of course, you cannot ever replace them with stock switches, so just keep that in mind.

This switch has an external 24 volt power supply?
I think that's a plus for this operation.

The devices that I am using are not switches. I don't know what you might call them except maybe LNB power boosters. See this link from where I talked about them before.

The switch will actually be located between the receiver and these devices. Here are those pictures again.

Since they don't actually do any switching themselves and are only used for boosting power to the LNBs is what led me to think that if it can output 18V on one side, why not both sides?

Looks like he just bypassed the 13V regulator.

That's basically all he did.

linuxman

May 16, 2008

I ordered another Bullseye II feed-horn. The guy I ordered my Bullseye II from had two of them. I just received the first a couple of days ago.

I called and ordered the second one yesterday, and just got confirmation on the shipping a little while ago. It takes almost 3 weeks for them to get here from the North East side of New Foundland Canada.

Mine didn't have LNBs, and they cost me $40.00 each plus shipping. If you look around on the internet, you can find them for a reasonable price.

Until our "smart" guys come up with a way to conveniently flip the servo motor on a Co-Rotor, I think this is the best setup to have as we move forward into the future with HD and DVB-S2 receivers. None of the newer receivers have servo control.

The other factor might be a re-designed C/Ku LNBf that works better than what currently is available.

ACRadio

May 16, 2008

One thing that I haven't seen mentioned in support of ortho feeds is that the servo style feeds have a bit of loss in the probe, and the ortho style counters this loss. Sometimes we make the mistake of thinking that the IF section and the microwave section of receive systems are directly related...that is...the "line amp will help a marginal signal" syndrome. They have to be treated as two seperate sections of the chain because the receiver only sees the downconverted IF signal and not the microwave signal. I mentioned on another forum that I was doing some research into Gregorian style dishes and the possibility of using a modified DBS dish as the sub reflector. This style is 10-12% more efficient with the same size main reflector.

View all replies (54)

TWiT Tech Podcast Network

20 minutes ago · posted in TWiT Tech Podcast Network

Tech News Weekly 441

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=JL5XFOpX4_A

Direct YouTube Link - Tech News Weekly 441
TWIT's Website
TWIT Live Feed

0 Replies · 2 views

Replies Reply Legacy View

TWiT Tech Podcast Network

20 minutes ago · posted in TWiT Tech Podcast Network

Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/CRhynF2RE20

Direct YouTube Link - Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 1 views

Replies Reply Legacy View

teachtom

22 minutes ago · posted in DISH Network Support Forum

Problem when I switch from Bonus View channels back to regular Dish channels

Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks

0 Replies · 4 views

Replies Reply Legacy View

dfergie

Staff member HERE TO HELP YOU!

Last reply 33 minutes ago · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so...

Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...

5389 Replies · 334594 views

Load Replies (5389) Reply Legacy View

TRG

Monday at 3:34 PM

Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

Reactions: Bobby and dfergie

dfergie

Monday at 4:27 PM

TRG said:
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

View attachment 191651

Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

Reactions: TRG

TRG

Monday at 4:50 PM

dfergie said:
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

I've been retired since October. It was very strange at first. But I'm loving it now.

Reactions: dfergie

TRG

Yesterday at 4:11 PM

Creamy flat chicken enchiladas with green chile, beans and rice.

Reactions: dfergie

dfergie

48 minutes ago

Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi

Reactions: TRG and Bobby

TRG

33 minutes ago

I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.

Reactions: dfergie

View all replies (5389)

N5XZS

Last reply 44 minutes ago · posted in Over the Air Television By RabbitEars.Info

New low power station with CP has been granted. "Albuquerque "

New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.

10 Replies · 150 views

Load Replies (10) Reply Legacy View

Reactions: comfortably_numb and dfergie

N5XZS

Yesterday at 4:51 PM

Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

Reactions: comfortably_numb

comfortably_numb

Yesterday at 4:54 PM

N5XZS said:
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station.

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet

N5XZS

Yesterday at 4:59 PM

Yes that's a good channel MovieSphere, only thing is the missing CC on it.

Reactions: comfortably_numb

comfortably_numb

Today at 1:35 AM

According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

primestar31

44 minutes ago

comfortably_numb said:
According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.

View all replies (10)

Linus Tech Tips

51 minutes ago · posted in Linus Tech Tips

I Found Free Money in the Tech House

Time for another AWESOME video from Linus Tech Tips!

View: https://www.youtube.com/watch?v=6FoAOhbeo5Y

Direct YouTube Link - I Found Free Money in the Tech House
Linus on Facebook
The LTT Store

0 Replies · 4 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Today at 1:32 PM · posted in TWiT Tech Podcast Network

Hollywood Faces the AI Tipping Point with Robert Tercek

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=MOgBoy9ScCY

Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed

0 Replies · 2 views

Replies Reply Legacy View

zippyfrog

Pub Member / Supporter Lifetime Supporter

Last reply Today at 1:28 PM · posted in DISH Network Support Forum

Price Increase on Owned Equipment?

Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.

6 Replies · 86 views

Load Replies (6) Reply Legacy View

zippyfrog

Today at 11:29 AM

However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

Reactions: charlesrshell

telstar_1

Today at 11:45 AM

Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Reactions: zippyfrog and charlesrshell

zippyfrog

Today at 12:34 PM

telstar_1 said:
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

Reactions: charlesrshell

MikeD-C05

Today at 1:11 PM

These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.

Reactions: Mr Tony, zippyfrog and charlesrshell

telstar_1

Today at 1:28 PM

Does cable charge box rent?

Reactions: charlesrshell

View all replies (6)

Bruce

Supporting Founder Lifetime Supporter

Last reply Today at 1:16 PM · posted in DISH Network Support Forum

Dish Satellite now under 5 Million subscribers/Sling under 2 Million.

With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

DISH & Sling TV Lost Over 366,000 TV Subscribers In Just 3 Months | Cord Cutters News

EchoStar Corporation, the owner of the DISH Network satellite television service and the Sling TV streaming platform, continued to experience steep declines in its pay-television customer base during the first three months of 2026. The company reported a net loss of approximately 366,000 pay-TV...

cordcuttersnews.com

71 Replies · 3426 views

Load Replies (71) Reply Legacy View

fmj77

May 11, 2026

I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Reactions: charlesrshell

Bruce

May 11, 2026

fmj77 said:
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

Reactions: fmj77, telstar_1 and charlesrshell

Yespage

May 18, 2026

$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

Reactions: charlesrshell

telstar_1

Jun 2, 2026

I despise that most of all. I'm going to talk to a remote?

Reactions: MikeD-C05 and charlesrshell

tsunami2311

Friday at 11:03 PM

Yespage said:
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

1gbit up and down here from att start out great was suppose to be $60 for life of service, with years time it went back up to $80 I complained about they gave us $49 for year which about to end, I Wonder what prices will be when it "up" I in no way like ATT fiber service there DNS that are hardcode and unchange able in the router are some WORSE DNS I ever used. you know how much of pain it is to change DNS setting on EVERY single wireless device...

Reactions: charlesrshell

mwdxer1

Saturday at 3:08 AM

Bruce said:
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

I dropped Dish a couple years back after having them for 25 years. The pricing got higher and after we got high speed internet, I watched it less and less. It got to the point all I watched was TCM for classic movies. Many of them are on You Tube now and a Premium subscription is $14 a month. A far cry of the $100 a month was paying with AT180, Supers, and locals. I get locals OTA anyway. I took down the dish several months ago and tossed it. I owned all my my equipment, so nothing to return. Do I miss a traditional cable type service? No way. If I want one I have all of the free live streaming with Roku, the Fire Stick, as well as Google TV. Right now as I type this, I am watching episodes of "The Midnight Special" from 1976 on You Tube, ad free. Dish was fine for many years. I do not regret buying the equipment and installing it myself (No installers in 1999). I enjoyed Dish for many years. My thoughts, Dish & Direct will be forced to merge in time, or they both will be gone. Even cable companies are getting out of TV. Some are only selling the internet and phone packages.

Reactions: charlesrshell and MikeD-C05

tanman

Sunday at 12:01 PM

telstar_1 said:
I despise that most of all. I'm going to talk to a remote?

Hello Computer On Phone GIF - Hello Computer Hello On Phone - Discover & Share GIFs

Click to view the GIF

tenor.com

Reactions: charlesrshell

nelson61

Monday at 8:20 PM

A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

Reactions: charlesrshell

MikeD-C05

Today at 1:16 PM

nelson61 said:
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

In my area we get 2 news feeds spread over 4 local stations.
ABC/NBC (TEGNA)
Same news cast simulcast over both channels.

CBS/Fox (Sinclair)
Same news casters at 5pm, 6pm, 10pm.
Fox shows an hour at 9pm but same news casters.

Reactions: charlesrshell

View all replies (71)

lordodogg

Last reply Today at 12:54 PM · posted in DIRECTV General Forum

HR44 rebooted overnight?

Hello again, haven't posted here in a while.

This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).

Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.

I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).

I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).

I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.

Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).

Thank you all in advance!

4 Replies · 152 views

Load Replies (4) Reply Legacy View

Tom Speer

May 20, 2026

My HR54 blue light is on this morning. I think you ae right about the plugins. They are tweaking things in the customer National release. What version does your HR44 Genie have now? I think you are probably on the same varsion as the CE group today.

lordodogg

May 20, 2026

I believe mine says 0x1D7F

Tom Speer

May 20, 2026

That is what I have.

Reactions: lordodogg

lordodogg

Today at 12:54 PM

Happened again today & have new software, 0x1d88

Top

Back