Social Feed

dfergie said:

View: https://youtu.be/n-NDYWPXpKg?si=hcI4ueMkFCreZ8Qq

Click to expand...

Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One

primestar31 said:

Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One

Click to expand...

At theaters, only in Japanese, on Disc and Netflix, available in English.

New trailer has dropped:

Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.

The USGS Kīlaeua Webcam #1 has been showing overflows and doming from the North vent overnight. Maybe the volcanic plumbing has settled back into its two-three week cycle of fountaining?

But I do miss the little cinder cone that broke up in the last episode.

Sorry, I should have posted these earlier:

We're still waiting on the start of Episode 56.

At 08:01 HST 11/05/2026, the North Vent produced what I would call a "wet burp" after the precursory "pistoning" events, small amounts of lava pouring out of the vent for a few seconds to minutes and then everything recedes. There must have been a gas bubble holding thing back because two minutes later the lava started flowing out of the vent in all directions. Then, at 08:25, it stopped. What a tease! I thought this was how Episode 56 started.

About 12 minutes later at 08:38, the North vent once again started overflowing and picked up steam at 08:42. By 09:00, slight doming could be seen in the pool of lava in the vent. Surely this is it!

But, 09:50 and things wind down again. By 09:57 HST there's just fumes coming out of the vent. Phooey.

But then 10:00 comes and the heavy lava flows kick in again. This time seems like the real deal. At 10:30 HST there's little spurts of lava flying up in the air over the vent, but more from gas than a steady fountain of lava. This looks promising!

11:30 HST and the color of the lava is definitely hotter, and the intensity has picked up to a definite dome and precursor to fountaining. The USGS calls Episode 56 as officially starting at 12:10 HST:

---

Alert Level: WATCH, Color Code: ORANGE 2026-11-05 22:29:12 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Thursday, November 5, 2026, 12:29 PM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H514
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 56 of the ongoing Halemaʻumaʻu eruption began at 12:10 PM HST on November 5, 2026.

Volcanic Activity:
Episode 56 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 12:10 PM HST on November 5, 2026.

Lava fountain heights are relatively low at about 100 ft (30 meters), but will likely increase. Ground-level sensors near the eruptive vents indicate that winds are blowing from the northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the southwest direction from Halemaʻumaʻu.

View: https://youtu.be/0-p9SIKs1K8?is=CXuDXVPi5oT6t_b0


Barbara Hershey

osu1991 said:

View: https://youtu.be/0-p9SIKs1K8?is=CXuDXVPi5oT6t_b0


Barbara Hershey

Click to expand...

Last of the Dogmen is my favorite of hers.

Star Wars Despecialized Edition

View: https://youtu.be/l3EMhIo1fVo?is=0sWWW9fevsF5tfSW


Small Soldiers (1998)

Just watched Napoleon. Good night.....all of those young men dying for the egos of their leaders. Now we can kill at a distance, back then you saw the man you were killing eye to eye.

comfortably_numb said:

Not sure saving $24/year is worth it unless you're a hardcore Philo user. I'll stick with monthly.

View attachment 195247

Click to expand...

$24 for the Year, would be more useful.

Jimbo said:

$24 for the Year, would be more useful.

Click to expand...

But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.

Howard Simmons said:

But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.

Click to expand...

Sorry, my point was the expense.

Jimbo said:

$24 for the Year, would be more useful.

Click to expand...

Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.

comfortably_numb said:

Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.

Click to expand...

I guess if it was something I used on a regular basis, I suppose.

In other Philo news..

comfortably_numb said:

In other Philo news..

View attachment 195293

Click to expand...

Oh boy, I can't wait!

Yeah, I'll check it out as well, but shan't be holding my breath...It'll be tough to equal James Garner in that role...

long_time_DNC said:

...It'll be tough to equal James Garner in that role...

Click to expand...

I can think of a few actors (including some females) who might fit the bill.

This will all depend on the storyline. I'm not sure how well it will translate. Modern TV hasn't been all that kind to PIs and even less kind to CIs (confidential informants).

Premier is Saturday, Jan 2nd. Moving to Thursday on the 7th.

Teaser

View: https://youtu.be/g7R669yokr4?is=wv_qN0B-YOBxRt24

dfergie said:

Teaser

View: https://youtu.be/g7R669yokr4?is=wv_qN0B-YOBxRt24

Click to expand...

I wonder how they're/if they're going to do something like the answering machine message opening? It was always funny...

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

dishstaller said:

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

Click to expand...

I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list

n0qcu said:

I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list

Click to expand...

Like I said.....that has been many years ago. Swapped my 722K for a Hopper in 2012.

It does seem like I remember having to delete the existing channels when we did a rescan. Back then our local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in. Got so bad that I stopped selling OR installing OTAs....something I had been doing since 1984 so you know it HAD to be pretty bad.

You made one of my points for me with this comment, Dishstaller:

"... local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in ..."

dishstaller said:

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

Click to expand...

I remember that also on my 722.

dennispap said:

I remember that also on my 722.

Click to expand...

Thanks.....has been too many years to remember clearly.

Keep in mind that the 722 had a built in OTA tuner and the 722K had a plug in module for OTA. The Hoppers and Wallys use an add on USB OTA dongle. I believe they are entirely different.