Social Feed

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Oct 23, 2008 · posted in DIRECTV General Forum

A Note About The CE Program

I wanted to take a moment and talk about the DirecTV Cutting Edge Program here at SatelliteGuys.US.

We are proud to be working with DirecTV on this inovative semi private beta program. Notice the keyword there, "Semi Private."

Over the past 24 hours there has been a lot of talk about the CE program in our public forum here and at other forums. This public discussion of the CE program is against the CE program policies which mandate that all CE discussions be done in the private CE discussion forum.

I am understanding that it was DirecTV who messed up by putting the cart before the horse by releasing the DirecTV2PC software yesterday before the non CE consumers had the proper software on their receivers to use the new DirecTV2PC beta software. It was because of this that many folks were talking about the CE program in public. The correct software was sent to the customers boxes last night, so from where I sit in the case of yesterdays issues at DirecT there was no harm or no foul here.

However with that said from this point forward please remember what happens in the CE forum stays in the CE forum.

If you are not member of the CE forum and you like to help test things and make DirecTV better for all we invite all SatelliteGuys members to participate in our CE program here at SatelliteGuys. The CE program is not for everyone, you working with cutting edge software which may have bugs and issues, only participate in the CE program if you are willing to accept the risks involved.

I also want to point out that we work with DirecTV on the CE program and in addition we also work in association with DBSTalk.COM on the CE program as well, the folks at DBSTalk are a big help to us with the CE Program and thank them for their assistance.

Again what happens in the CE Forum stays in the Forum.

Thanks for your understanding and participation!

6 Replies · 3813 views

Load Replies (6) Reply Legacy View

ShaqDan

Oct 22, 2008

How does one get involved in the CE program?

ShaqDan

Oct 22, 2008

Never mind, I learned how to read!

http://www.satelliteguys.us/directv...ogram-terms-faq-how-hidden-features-more.html

jcrandall

Oct 22, 2008

It is the help of many members over several weeks that make a software release like the one sent out last night as stable as possible.

It is entirely possible that the software release last night was sped up due to the difficulty with some freezing issues on HDDVR receivers. That said, DirecTV was in a position to be comfortable with the 0x0290 software prior to releasing it nationwide in the manner they did.

That comfort comes from having members use the CE software for many weeks, while DirecTV engineers tweak the software.

With that, THANK YOU to our Cutting Edge members, an integral part of improving the experience for all DirecTV customers.

goaliebob99

Oct 22, 2008

Guys I would also like to Chime in. Dont be afraid to give the CE program a try. Directv has been absolutly fantatstic in reguards to CE participation. I havent seen any program like this from any other provider, and this program is truely cutting edge. Like Scott said it is not for everyone, but I do invite you to try. If all else fails and you do not like it you can always revert back to national software wich usally puts everything back in its proper place. I have been doing CE testing for well over 6 months now and helping them make this software, what it is today has been a joy. I would like to personaly thank all the employees over at Directv and DBS talk who make this program happen allong with our hard working CE staff here. This program shows what the best intrest of all and that is creating a rock solid box that everyone likes.

I cant wait to see what comes next for the CE program, as well as what new HD lies around the corner.

sundude90

Oct 23, 2008

I want to 2nd what goaliebob99 said!! Thank you to Scott and Jason also!!

View all replies (6)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply 38 minutes ago · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68657 Replies · 2680161 views

Load Replies (68657) Reply Legacy View

Reactions: c-spand

sdfntx

Today at 10:19 AM

I Care About Detroit - Smokey Robinson & the Miracles

dishstaller

Today at 10:32 AM

I Wanna Talk About Me - Toby Keith

Bobby

Today at 10:51 AM

98.6 - Keith

harshness

55 minutes ago

I'm Easy - Keith Carridine

gms49ers

38 minutes ago

It's Easy - Boston

View all replies (68657)

reubenray

Last reply Today at 10:36 AM · posted in Computers and Gadgets

Laptop Shutting Off When On Battery?

Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.

2 Replies · 39 views

Load Replies (2) Reply Legacy View

arlo

Today at 10:09 AM

A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.

dishstaller

Today at 10:36 AM

arlo said:
That's all I got.

That was quite enough....I definitely learned something from your post. Thanks

TRG

Pub Member / Supporter

Last reply Today at 10:27 AM · posted in Computers and Gadgets

Starlink Router question

I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.

5 Replies · 278 views

Load Replies (5) Reply Legacy View

b4pjoe

Saturday at 2:12 PM

TRG said:
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.

If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.

Reactions: harshness

HipKat

Saturday at 11:07 PM

TRG said:
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.

They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc

Reactions: Foxbat

Foxbat

Sunday at 12:44 AM

TRG said:
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.

The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.

harshness

Sunday at 11:46 AM

If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

Starlink V5 Is Here: What RVers Need to Know

Overview of the new Starlink V5 model along with comparison to the previous V4 model along with a recommended setup for mobile internet users.

mobilemusthave.com

Reactions: Foxbat

Foxbat

Today at 10:27 AM

Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 10:27 AM · posted in The Chit Chat Club

I think we could all use a laugh - Rodney Dangerfield on Carson

Good...simple humor. Enjoy

View: https://www.youtube.com/watch?v=E92AtfTLge4

View: https://www.youtube.com/watch?v=HJy0WnejlF4

2 Replies · 47 views

Load Replies (2) Reply Legacy View

Jimbo

Today at 12:37 AM

Not Rodney, but a laugh ...

View: https://www.youtube.com/shorts/WHEcmortfK0?feature=share

dishstaller

Today at 10:27 AM

Sorry for posting the wrong link. Just corrected it.

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 10:17 AM · posted in The Chit Chat Club

At least 64 dead in Spanish passenger train collision

Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

At Least 64 Dead After Two High-Speed Trains Collide In Spain | ZeroHedge

ZeroHedge - On a long enough timeline, the survival rate for everyone drops to zero

www.zerohedge.com

2 Replies · 51 views

Load Replies (2) Reply Legacy View

Reactions: Jimbo

Jimbo

Yesterday at 11:24 AM

dishstaller said:
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

At Least 64 Dead After Two High-Speed Trains Collide In Spain | ZeroHedge

ZeroHedge - On a long enough timeline, the survival rate for everyone drops to zero

www.zerohedge.com

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.

dishstaller

Today at 10:17 AM

Thought this article might be of interest to some of you who might travel via train.

The safest seat to sit on in a train

Safety experts have shared top tips on train safety after a fatal railway crash in Spain killed 69 people, including where the safest place is in an emergency.

www.dailymail.com