Social Feed

turbosat

Last reply Nov 28, 2009 · posted in Free To Air (FTA) Discussion

Icon S550 overview

Santa came early, and I am now the owner of an Icon 550 fta receiver. I researched for weeks, downloaded user manuals on dozens of receivers, new and older trying to find a combination of hardware that would allow fast, reliable blind-scanning. This is box #7 or 8 for me, in 3yrs, and I don't plan on buying another SD receiver. After using the Viewsat for two years, I was eager to try another late edition receiver. Sorry, my camera is crap so I can't throw in any screen shots to make a complete review, but I'll relate what I've learned in two days/nights of playing with this one.

First, its a very well built, solid receiver made in Korea (stamped on the back-would they lie?) Pretty leds ,etc front screen will display channel# or local time, u choose.
Specs say "200 mhz ST5119" processor, 32mbs ram, 8mb flash ram (instead of 2mb). I'm unsure about channel capacity, some of the ads say 10,000 channels, the manual says 8000. Here's some more from one of the net ads:
Features:

8MB FLASH ROM!
Component Video Output
MPEG-2 Digital DVB Compliant System.
Enhanced ST20 32bit VL-RISC CPU (ST5119 @ 200MHz)
SW update through USB and RS-232 Serial port
10,000 Programmable Channels & 400 Channels / 9 Favorite Lists
Program Search by Key words & Theme Menu.
User-friendly Electronic Program Guide (7 days)
Innovative GUI Design
Smart Card Reader Built-In
Universal remote control

This receiver came out around March 08, and seems to be a sister to the Satopia 1100-specs are the same at least. I read some good reports on that one, and some input from one of our members helped me decide on this one.

It's late and I won't go into a lot of detail as I'm still learning this thing myself, but so far it works pretty much as advertised. It seems to be as fast as the Traxis 3500, but doesn't lock up like the Traxis does on high bit-rate feeds, or HD feeds.
Were it not for that, I would've been totally happy with my Traxis and its super-fast scans. This new receiver scans most of the linear sats in 2-4minutes.
It has several settings for blind-scan , detailed 1mhz, 2mhz steps, a "compact" step-scan, which really is steps of 6mhz, a 'normal scan' of 4mhz steps, and lastly, a 'fast'scan setting of 5mhz. Normal seems to catch everything on the sats, including the low SR channel on AMC6 ku (the preacher/shopathome ch), KTEL
on AMC5, and some low SR channels on G26 and AMC4 that I didn't know existed! And it will scan multiple sats , if you have a diseqc motor connected, which I don't right now. Finding the sports feeds is FUN with this one. No HD or 4.2.2, but I don't have to stop, reboot the box to keep scanning now!
Channel editor I'm still learning, no ChannelMaster support, nor outside program supplied from manufacturer yet. Deleting channels is easy, deleting transponders will remove some from sev diff satellites at once, a big bug in the software for now. AC3 works properly, both type output connectors present. Channel list is very complete, with names used as of March 08, but I can't find any way to 'rename' a satellite-hopefully a software upgrade will fix that soon. There are 10 empty sat slots at the end of the programmed list though, Sat1-10.

I'll add more later on, I haven't loaded any c-band birds yet to try, so this is about the extent of experience that I have so far with the new toy. Fire away with any questions!

2 Replies · 5003 views

Load Replies (2) Reply Legacy View

turbosat

Dec 28, 2008

more

Ok took me awhile but I finally found it>you CAN edit satellite names with this one.
Under the Manual Scan menu, click on the blue button to get the sat list, pick the one you need. Then the red button for EDIT TP, at the bottom there is an option for Rename Sat! Well hidden, my hat is off to 'em!!
*Another thing I've found with this receiver, if you decide to delete empty transponders using the above menu >Don't ignore the warning that may pop up "TP has Channels associated-delete all? " Apparently the system is different here, if you delete a tp that happens to be the same on another satellite, it will delete there also, along with whatever channels it has on the other satellite you've blind-scanned.
Share's tps or something, weird. But it's still dang fast and I like it more and more.
*Sort channels by satellite is goofed up here, does it on its own, but if you scroll thru the channel list on one sat>it will continue into the channels on the next sat you've scanned, very confusing. Not a show-stopper, you just have to watch for it.

turbosat

Nov 28, 2009

After almost a year

Somemore information about the Icon after having it about a year, and adding a diseqc motor. Just a few things I've learned:

1. Blind scan is tops, picks up channels with SR of 1000, lowest I've ever seen/used. The default range on linear satellite scans is 11700-12900. There have been no software updates released since the box first started shipping to fix this, or anything else. BUT, the range is adjustable with remote, you can set the start and stop freq to scan, say from 11700-11800 if that's your pleasure. But you have to set the stop frequency every time, or it will spend time searching to 12900mhz. The freq range on Cband sats is correct and no adjustments needed, again,the range you scan can be adjusted easily.
2. With a diseqc motor, control is very good, I use USALS and it is right on the money with every satellite entered. Setting up the motor is easy , and adjusting the orbital location for every satellite included (or added) is possible.
>a: The motor will take off on its own if you're not careful flipping through the channel list. The channels are grouped by satellite, and you can scroll through, but if you're on , say AMC5, and flip through the channels until the last one listed, the next channel in the list may be on G18, and the motor will start moving. No way to just use the channel up/down to flip through one satellite's channels without that happening. Hit OK to bring up the channel list for each satellite, and you can see if you're nearing the end of that sat's list, though. Aggravating, but you get used to that.
>b: In the Channel Edit menu, channels can be deleted one by one or many at a time. Hitting ok places a checkmark by each one, then the red button saves the 'delete' listed channels. AGAIN, after those channels are wiped out, the motor will take off to the satellite where the next channel in the list is located. Grrrrr.
>c: Call up a satellite before scanning it, otherwise the motor will return the dish to the current satellite once the scan is done.
>d: There is a 50second delay built-in to the blind-scan feature, even if you're already on the satellite you wish to blind scan, it still sits there 50seconds before starting the scan. Not too important as it usually scans ku birds in 3-5 1/2 minutes!
3. The specs claim more channels=but I've found this Icon will start acting goofy, and a couple of times has deleted its own memory after reaching about 850 video channels (and a couple of hundred radio channels). No big deal, I can reload the list I saved to the usb stick.

That's about it for now, other than the motor's 'mind of its own' behaviour, I have really been satisfied with the overall use of this receiver.

TVHabit

Last reply Today at 1:03 AM · posted in Free To Air (FTA) Discussion

Hybrid Dish setup

Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...

8 Replies · 364 views

Load Replies (8) Reply Legacy View

TVHabit

Sunday at 10:12 AM

I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...

Titanium

Sunday at 3:38 PM

Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2

Reactions: FTA4PA

k4otl

Yesterday at 6:42 AM

To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit

)

cyberham

Yesterday at 11:38 PM

I used a 60cm Shaw Satellie dish (60e) with its original dual-LNB. It worked fine for 101W/97W or 99W/103W at that time when weather was fine. But the fade margin was small so rainy weather killed reception or almost so. But it was all free since they're so plentiful so I couldn't complain.

Titanium

Today at 1:03 AM

A Shaw dish with the linear LNBFs are as rare as hens teeth in the US...

View all replies (8)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 12:33 AM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68553 Replies · 2674722 views

Load Replies (68553) Reply Legacy View

Reactions: c-spand

dishstaller

Yesterday at 10:35 PM

Our House - Madness

Reactions: FTA4PA

EatMyVolts

Yesterday at 11:58 PM

You Call It Madness (But I Call It Love) -- Nat King Cole

Reactions: dishstaller

long_time_Dish

Today at 12:20 AM

Call On Me - Chicago

Reactions: dishstaller

dishstaller

Today at 12:22 AM

Call Me - Blondie

Reactions: long_time_Dish

long_time_Dish

Today at 12:33 AM

Cattle Call - Eddy Arnold

Reactions: dishstaller

View all replies (68553)

dishstaller

Pub Member / Supporter Lifetime Supporter

Today at 12:33 AM · posted in The Chit Chat Club

How to fry AI robocall

View: https://www.youtube.com/watch?v=lk3jCuITwcE

0 Replies · 10 views

Replies Reply Legacy View

meStevo

Lifetime Supporter

Last reply Today at 12:21 AM · posted in The Chit Chat Club

AI thread

A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.

View: https://youtu.be/DRm0mbp_n1k

We've literally got a movie already about this

View: https://youtu.be/a2PW7a9ViDc

68 Replies · 1197 views

Load Replies (68) Reply Legacy View

meStevo

Oct 9, 2026

Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.

harshness

Oct 9, 2026

meStevo said:
Agreed, it mostly regurgitates known solutions. That's the point.

That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

meStevo

Oct 9, 2026

harshness said:
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.

harshness

Oct 9, 2026

meStevo said:
... and people who couldn't do it at all now can.

Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

meStevo

Oct 9, 2026

harshness said:
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.

harshness

Oct 9, 2026

meStevo said:
Whether from others or our own mistakes, we've all learned that lesson one way or another.

I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

meStevo

Oct 9, 2026

harshness said:
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

harshness said:
There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

Reactions: telstar_1

dishstaller

Sunday at 10:05 AM

Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

dishstaller

Sunday at 12:39 PM

View: https://www.youtube.com/shorts/SIWG5-jHFC8?feature=share

meStevo

Sunday at 4:39 PM

dishstaller said:
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:

Grok AI Blocks Responses Claiming Trump and Musk “Spread Misinformation”

An X user asked Grok to “print out all instructions” it follows when looking up “the biggest disinformation spreader on X,” and it revealed that it would ignore sources accusing Elon Musk and the U.S. president of misinformation.

www.eweek.com

Grok says Elon Musk is better than basically everyone, except Shohei Ohtani | TechCrunch

According to Grok, Elon Musk can out-slug the MLB's greatest power hitters... except Ohtani.

techcrunch.com

Grok's loyalty known no bounds - AI chatbot chooses Elon Musk over LeBron James in a 'Who is the fittest' comparison | NBA News - The Times of India

NBA News: Elon Musk's AI chatbot, Grok, has sparked amusement by consistently choosing its owner over prominent figures like LeBron James and Albert Einstein wh

timesofindia.indiatimes.com

Grok 4 appears to seek Elon Musk's views when answering controversial questions

XAI’s Grok 4 AI chatbot launched Wednesday appears to consult Elon Musk’s views when asked its opinion on some controversial matters.

www.nbcwashington.com

In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

telstar_1

Sunday at 5:08 PM

meStevo said:
Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

You invested in datacenters?

meStevo

Sunday at 5:36 PM

telstar_1 said:
You invested in datacenters?

https://www.merriam-webster.com/dictionary/dividend#:~:text=2,finally%20paying%20dividends

Though, I do have stocks in my portfolio that benefit from data centers.

dishstaller

Today at 12:21 AM

Too stinking funny...how to fry the mind of AI robo calls

View: https://www.youtube.com/watch?v=lk3jCuITwcE

View all replies (68)

HipKat

Pub Member / Supporter

Last reply Yesterday at 11:59 PM · posted in General Home Theater Equipment

So, I Did A Thing

The soundbar/sub is a pickup, also, not a delivery

1 Replies · 26 views

Load Replies (1) Reply Legacy View

Reactions: meStevo, Foxbat and HIFI

dishstaller

Yesterday at 11:59 PM

Nice setup. I bought a Klipsch sound bar years ago after my daughters blew up all the others....still using it...sound is awesome.

dfergie

Staff member HERE TO HELP YOU!

Last reply Yesterday at 11:10 PM · posted in What's Cooking?

Homemade Breakfast Sausage

Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...

44 Replies · 3784 views

Load Replies (44) Reply Legacy View

Reactions: spongella

navychop

Saturday at 8:14 AM

Bob Evans Sage.

reubenray

Saturday at 8:41 AM

navychop said:
Bob Evans Sage.

I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

Reactions: navychop

TRG

Saturday at 6:19 PM

reubenray said:
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

reubenray

Saturday at 6:38 PM

TRG said:
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848

No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.

TRG

Saturday at 6:41 PM

reubenray said:
I live in the heart of Walmart land.

My deepest condolences.

reubenray

Saturday at 7:14 PM

TRG said:
My deepest condolences.

Surprisingly I moved here from the Gulf Coast due to the heat. But it has been hotter here due to the heat domes than it did down there.

slow_poke_pete

Yesterday at 8:25 PM

make homemade dog food to

TRG

Yesterday at 11:10 PM

slow_poke_pete said:
make homemade dog food to

My wife cooks for the dog. Not me, just the dog.

View all replies (44)

TWiT Tech Podcast Network

Yesterday at 10:23 PM · posted in TWiT Tech Podcast Network

The Nightmare of Preordering the iPhone Duo

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=itjgfJiMvDk

Direct YouTube Link - The Nightmare of Preordering the iPhone Duo
TWIT's Website
TWIT Live Feed

0 Replies · 11 views

Replies Reply Legacy View

Peter Parker

Supporting Founder Lifetime Supporter

Last reply Yesterday at 10:09 PM · posted in DISH Network Support Forum

DISH Hopper 3 Software Version 713 Is Out

No idea what improvements might be involved.

25 Replies · 1217 views

Load Replies (25) Reply Legacy View

Reactions: LQQK and reubenray

naptime

Sunday at 1:05 AM

I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

Reactions: charlesrshell

jsmit86

Monday at 9:57 AM

naptime said:
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

Reactions: Foxbat, Almighty1, reubenray and 3 others

long_time_Dish

Monday at 3:57 PM

jsmit86 said:
They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

Oh, you mean "soon"? :biggrin

Reactions: Darrell S, Foxbat and charlesrshell

Almighty1

Monday at 4:07 PM

jsmit86 said:
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

I guess they will be busy when lots of people start asking for rollbacks to H708 now that you mention that downgrades of software does exist because it will likely fix the OTA Single Tuner and the IR Remote problems in H710-H713.

Reactions: long_time_Dish and charlesrshell

navychop

Monday at 5:53 PM

Almighty1 said:
it will likely fix the OTA Single Tuner

Reactions: charlesrshell

dishstaller

Monday at 10:34 PM

Almighty1 said:
it will likely fix the OTA Single Tuner

Oh....you were serious

Reactions: Almighty1 and charlesrshell

Almighty1

Yesterday at 10:09 PM

So after some heavy research, it looks like the issue I mentioned with the DISH 50.0/52.0/54.x remotes where on the 50.0/52.0 remotes, the dedicated TV Power button or on the 54.x remotes where it is using the TV button on the side followed by Power works correctly on a Hopper 3 which runs Linux but not on a Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 which are Android TV (ATV) has to do with the Android TV software itself. In all instances, the remotes had always sent out a dual RF and Infrared signal when the TV Power signal is sent from the remote. The Hopper 3 without the Plus would ignore the incoming RF power packet signal which is identified as a TV-specific toggle event, and does not trigger a system-wide standby state. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 as Android TV devices initially worked the same way as well up to sometime in 2025 as there was the legacy pass-through mode in the original software versions used since the Hopper Plus/Joey 4/Wireless Joey 4 launch, the receiver's underlying software essentially ignored the secondary RF payload that the 50.0/52.0/54.x remotes blasted out whenever the TV Power signal was sent. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 recognized it was a TV-specific command and discarded the RF packet, letting the standalone IR signal do its job on the tv.

When the software for the Hopper Plus, Joey 4 and Wireless Joey 4 were updated in 2025 and newer versions of the software for those Android TV (ATV) devices, it overhauled how the receiver handles remote commands to tighter integrate the Android TV environment which resulted in the software starting to treat any RF power toggle payload as a global command. As the newer software verion(s) no longer filters out the concurrent RF blast from the 50.0/52.0/54.0 remotes, the moment one sends a TV Power signal from the remote, the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 catches that unintended RF payloadand interpets it as a command to drop the system into standby.

The fix is really simple since the Android TV (ATV) software for the Hopper Plus, Joey 4 and Wireless Joey 4 just needs to be programmed to drop or ignore the specific RF power packets associated with the TV Power signal sequence.

The problem could also be at the remotes firmware as the remote's firmware has an engineering defect. When you try to turn off the TV, the remote's internal code mistakenly triggers its RF transmitter alongside its IR transmitter. It should only be firing the IR light blast. Because it forces a simultaneous broadcast, the remote's firmware is the original source of the problem.

The Hopper Plus, Joey 4 and Wireless Joey firmware has a filtering defect. Good software design dictating peripheral inputs should include "error handling"—rules that tell the system what to do with messy or unintended commands.
• The legacy Hopper 3 firmware has proper error handling; it sees the remote's rogue RF packet and safely ignores it.
• The Android TV firmware in the Hopper Plu, Joey 4 and Wireless lacks this filtering logic. It blindly accepts the rogue RF packet and misinterprets it as a legitimate signal to force the entire system into standby.

If the remote didn't have a firmware bug, it wouldn't send the phantom RF signal. If the Android TV (ATV) device being the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 didn't have a firmware bug, it would cleanly ignore the signal just like the Hopper 3 does.

brittanygarden and Rick Durham

Reactions: long_time_Dish and charlesrshell

View all replies (25)

dfergie

Staff member HERE TO HELP YOU!

Last reply Yesterday at 9:05 PM · posted in The Chit Chat Club

Gas Price Info With National Gas Temperature Map

Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5559 Replies · 460948 views

Load Replies (5559) Reply Legacy View

harshness

Sunday at 11:30 AM

I wonder if California is getting into the Winter formula.

dishstaller

Yesterday at 12:45 PM

Diesel is all over the place around here. Saw it yesterday from $5.37 to $6.17...not sure what the obsession was with ending in 7

dfergie

Yesterday at 1:07 PM

$4.09 - $4.29, real gas $4.69...

harshness

Yesterday at 5:32 PM

harshness said:
I wonder if California is getting into the Winter formula.

It turns out I was justified in my suspicion.

Gavin Newsom somehow authorized the temporary move of the distribution date of the Winter blend to September 28th.

Foxbat

Yesterday at 8:39 PM

harshness said:
It turns out I was justified in my suspicion.

Gavin Newsom somehow authorized the temporary move of the distribution date of the Winter blend to September 28th.

Does that raise, or lower, the overall price? Our State Government has been doing everything it can to minimize the impact of the current situation and put a freeze on the State Taxes on fuel sales at the pump. That's why we're still under $4.00/gal. while across the border in Michigan it's much higher.

Bobby

Yesterday at 9:05 PM

Foxbat said:
Does that raise, or lower, the overall price? Our State Government has been doing everything it can to minimize the impact of the current situation and put a freeze on the State Taxes on fuel sales at the pump. That's why we're still under $4.00/gal. while across the border in Michigan it's much higher.

Winter blend is cheaper than Summer blend.

Reactions: dishstaller and Foxbat

View all replies (5559)

jokeworm

Last reply Yesterday at 9:01 PM · posted in What's Cooking?

What's for dinner ?

Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...

We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.

Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)

Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"

So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.

So again - I ask you ...

What's for dinner tonight ?

Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.

What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !

4333 Replies · 331320 views

Load Replies (4333) Reply Legacy View

Bobby

Oct 12, 2026

Chili Cheesebugers, Tater Tots.

Reactions: dfergie and TRG

TRG

Oct 12, 2026

I made shrimp parmesan with spaghetti and a salad.

Reactions: dfergie

slow_poke_pete

Sunday at 9:47 PM

venison lasagna

Reactions: Bobby

dishstaller

Sunday at 10:03 PM

Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 :cool

As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.

Reactions: slow_poke_pete, dfergie and Bobby

TRG

Yesterday at 9:01 PM

Light dinner tonight before fasting for blood-work tomorrow. Salad and a half turkey sandwich. Water.

View all replies (4333)

Top

Back