Social Feed

Yeah, I'll check it out as well, but shan't be holding my breath...It'll be tough to equal James Garner in that role...

long_time_DNC said:

...It'll be tough to equal James Garner in that role...

Click to expand...

I can think of a few actors (including some females) who might fit the bill.

This will all depend on the storyline. I'm not sure how well it will translate. Modern TV hasn't been all that kind to PIs and even less kind to CIs (confidential informants).

Premier is Saturday, Jan 2nd. Moving to Thursday on the 7th.

Teaser

View: https://youtu.be/g7R669yokr4?is=wv_qN0B-YOBxRt24

dfergie said:

Teaser

View: https://youtu.be/g7R669yokr4?is=wv_qN0B-YOBxRt24

Click to expand...

I wonder how they're/if they're going to do something like the answering machine message opening? It was always funny...

Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.

Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.

The USGS Kīlaeua Webcam #1 has been showing overflows and doming from the North vent overnight. Maybe the volcanic plumbing has settled back into its two-three week cycle of fountaining?

But I do miss the little cinder cone that broke up in the last episode.

Sorry, I should have posted these earlier:

We're still waiting on the start of Episode 56.

At 08:01 HST 11/05/2026, the North Vent produced what I would call a "wet burp" after the precursory "pistoning" events, small amounts of lava pouring out of the vent for a few seconds to minutes and then everything recedes. There must have been a gas bubble holding thing back because two minutes later the lava started flowing out of the vent in all directions. Then, at 08:25, it stopped. What a tease! I thought this was how Episode 56 started.

About 12 minutes later at 08:38, the North vent once again started overflowing and picked up steam at 08:42. By 09:00, slight doming could be seen in the pool of lava in the vent. Surely this is it!

But, 09:50 and things wind down again. By 09:57 HST there's just fumes coming out of the vent. Phooey.

But then 10:00 comes and the heavy lava flows kick in again. This time seems like the real deal. At 10:30 HST there's little spurts of lava flying up in the air over the vent, but more from gas than a steady fountain of lava. This looks promising!

11:30 HST and the color of the lava is definitely hotter, and the intensity has picked up to a definite dome and precursor to fountaining. The USGS calls Episode 56 as officially starting at 12:10 HST:

---

Alert Level: WATCH, Color Code: ORANGE 2026-11-05 22:29:12 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Thursday, November 5, 2026, 12:29 PM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H514
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 56 of the ongoing Halemaʻumaʻu eruption began at 12:10 PM HST on November 5, 2026.

Volcanic Activity:
Episode 56 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 12:10 PM HST on November 5, 2026.

Lava fountain heights are relatively low at about 100 ft (30 meters), but will likely increase. Ground-level sensors near the eruptive vents indicate that winds are blowing from the northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the southwest direction from Halemaʻumaʻu.

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

dishstaller said:

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

Click to expand...

I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list

n0qcu said:

I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list

Click to expand...

Like I said.....that has been many years ago. Swapped my 722K for a Hopper in 2012.

It does seem like I remember having to delete the existing channels when we did a rescan. Back then our local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in. Got so bad that I stopped selling OR installing OTAs....something I had been doing since 1984 so you know it HAD to be pretty bad.

You made one of my points for me with this comment, Dishstaller:

"... local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in ..."

dishstaller said:

I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.

Click to expand...

I remember that also on my 722.

dennispap said:

I remember that also on my 722.

Click to expand...

Thanks.....has been too many years to remember clearly.

Keep in mind that the 722 had a built in OTA tuner and the 722K had a plug in module for OTA. The Hoppers and Wallys use an add on USB OTA dongle. I believe they are entirely different.

Finished the 2nd episode tonight. I'm really liking it so far.

Still hate weekly releases though, especially the way Disney and HBO do it waiting until 8pm to premiere it.

Apparently I'm not a big enough nerd since I did not read every Marvel Comic Book ever published. If I had, I might be comparing the comics' version of events compared to what's transpiring in "Visionquest". So, I am enjoying the series a lot, not weighed down by previous expectations, knowing only the Avengers MCU movies and the "Wandavision" / "Agatha All Along" TV series.

I found the Mr Know-it-All channel from his discussion about "Star Trek: Strange New Worlds" and he's been gleefully picking these episodes apart, referencing the Marvel comics from the 1939 on. Turns out A.I. has been around since before World War II, at least in the comics. (Robots before that, yes, yes.) This show is going back into the archives.

I'm expecting the finale to basically bring Vision into play for the Doomsday movie next month.

annoying they went with single episodes for the last two after releasing two a week for the first 3 weeks

osu1991 said:

annoying they went with single episodes for the last two after releasing two a week for the first 3 weeks

Click to expand...

I thought they were effectively releasing a longer episode 7 and 8 instead of shorter episodes 7 & 8 this week and 9 & 10 next week. It felt like they were packing more into this episode.

edit: But you're right, the run time of the first three pairs of episodes was 100 minutes on average. Episode 7 clocks in at 65 minutes.

I Can't Wait - Nu Shooz

Shooz - Styx

Too Much Time on My Hands - Styx

Time Has Come Today - The Chambers Brothers

No Time - The Guess Who

I know a few people who have gotten one and I am told like most modern streaming boxes this one also has HDR on all the time.

Scott Greczkowski said:

I know a few people who have gotten one and I am told like most modern streaming boxes this one also has HDR on all the time.

Click to expand...

I only noticed that as a problem on TVs that handle HDR poorly. They don't have enough peak brightness or enough dimming zones. For instance, TCL makes three lines of TV, sort of like the old Sears model of Good, Better, Best. On my 4 or 5 year end low price model, HDR looked awful (My neighbor likes the TV now). The midrange model from the next model year ithat I have at my Lake home now looks pretty good in HDR all the time. The midrange TCL QM7 model from last year at my other home looks spectacular, as I remember. I haven't seen it for 6 months.

If I had a TV that does HDR poorly, I would configure the Gemini to disable all HDR.

Tom Speer said:

I only noticed that as a problem on TVs that handle HDR poorly. They don't have enough peak brightness or enough dimming zones. For instance, TCL makes three lines of TV, sort of like the old Sears model of Good, Better, Best. On my 4 or 5 year end low price mode, HDR looked awful (My neighbor likes the TV now). The midrannge model from the next model year ithat I have at my Lake home now looks pretty good in HDR all the time. The midrange TCL QM7 model from last year at my other home looks spectacular, as I remember. I haven't seen it for 6 months.

If I had a TV that does HDR poorly, I would configure the Gemini to disble all HDR.

Click to expand...

I agree with that. The 2 LGs that we have Gemini's on looks far better with HDR enabled then it does with HDR off.

Scott Greczkowski said:

I know a few people who have gotten one and I am told like most modern streaming boxes this one also has HDR on all the time.

Click to expand...

That would be a deal-breaker for me. The Rokus default to having it on all the time but it's easy enough to change that to native. If the content is HDR it goes on. Otherwise, no.

I don't mind HDR being on as long as its adaptive. I don't need HDR on non-HDR content

Also, God only knows how much it'll cost to get this per month. 10 bucks a month for 3 TVs in my apartment is not worth it if I can just use my android boxes and appletv to watch

Redbullsnation said:

I don't mind HDR being on as long as its adaptive. I don't need HDR on non-HDR content

Also, God only knows how much it'll cost to get this per month. 10 bucks a month for 3 TVs in my apartment is not worth it if I can just use my android boxes and appletv to watch

Click to expand...

It is not adaptive. HDR is either always on or off. No in between. However with my Gemini on satellite everything looks much better with HDR on.