Why did the customer have the old 45w power adapter? New HN7000S systems automatically come with 64w or larger, as should the modem-only upgrade packages. And as I'm sure you know, the 45w won't sufficiently power anything larger than a 1 watt transmitter either.
The adaptive inroute capability of the HN-series means the modem varies its L-band output level proportionate to SQF samplings. A drop in SQF typically signifies atmospheric attenuation (rain fade), so the modem increases the L-band output to the transmitter to compensate. To do this, the modem needs more DC from the power adapter.
When ranging, the modem increases L-band output until it gets an "I see you" signal from NOC equipment. Your 45w power adapter may be at max output, and still not be providing sufficient DC power to get a ranging signal of sufficient strength to the NOC.
Cable loss could also be contributing. So first thing I'd do is a loop resistivity test - IDU to ODU - on each cable path (FSB 0510-19-1A). Replace any suspect cables and test again. If/when they pass, replace the 45w power adapter with the standard HN7000S power brick - and try ranging again.
Ranging itself is the process of determining time and distance to satellite. Time and distance are critical to obtaining/maintaining/recovering synchronization with the network timing loop. Distance is simple Pythagorean theorum, calculated from where the modem has been told it's located (ZIP or Lat/Lon). Time however, has to be done with something like a PING. The modem sends the ranging carrier to the satellite, which relays it back down to the NOC - who sends it back to the customer. A total elapsed time is obtained. The NOC knows it's own time to/from satellite, so that's subtracted from the total. The remainder is the customer time to/from satellite. To give you an idea of how critical the ranging time is, the result is recorded in your modem to the 7th decimal point. My current time to satellite (and back) for example, is .2503698 seconds (or 250.3698ms).
//greg//