Social Feed

talrudeboy

Last reply Nov 3, 2004 · posted in Free To Air (FTA) Discussion

DVB A/B SWITCH Channels how to?

I want instuctions fromt hose who has the DVB and Regular KU ban setup.

I have ST3688

Winegard 30"/75cm Offset dish (DS2076)

SG2100 DiSEqC Motor Now just

I have an A/B switch for the KU LNB and my new DTV LNB i had sitting around doing nothing.

So far What i do is.

1. Go to the Sat.
2. Whil the ST3688 is on Press the B switch to switch over to the DVB LNB (no motor)
3. ????????????????????????????????????????????????????????

DO I Change the Freq to 11255 and Save it and Blind search?
DO I Change the freq to 11255 and Save then turn of the unit and turn it back on?

I am lost. I tried it all and no signal.
Help

17 Replies · 2996 views

Load Replies (17) Reply Legacy View

TuxCoder

Nov 3, 2004

talrudeboy said:
Who currently has this setup?
I have ST3688

Winegard 30"/75cm Offset dish (DS2076)

SG2100 DiSEqC Motor Now just

I'm close to that, just the Pansat instead of Satworks but the wiring is all the same.

I get regular digital sat stuff.
I want to use the DVM LNB TO get DVB Stuff.

Who has this setup with switches and motor and 1 Receiver?

It's all DVB (with the Satworks at least) so I assume you mean DBS LNB and DBS stuff.

Here's how you should wire yours if you're going to get a DiSEqC 2x1 or 4x1 switch (minus grounding to keep the explanation simple):
1. Cable going from receiver's "LNB/IF Input" jack to the SG2100's "to receiver" jack.

2. Cable going from SG2100's "to LNB" jack to the "to receiver" jack of the DiSEqC switch.

3. Cable going from "LNB 1" of the switch to one of the LNBS (I suggest the Ku FSS one).

4. Cable going from "LNB 2" of the switch to the other LNB (i.e. the Ku DBS one).

Here's a little diagram to make things clearer. The things in parenthises, like "(LNB)" are shortened labels for the appropriate jacks on the devices.

Code:

ST3688 (LNB) ---- (xcvr) SG2100 (LNB) ---- (xcvr) DiSEqC 2x1 (LNB 1) ---- Ku FSS
                                                       +---- (LNB 2) ---- Ku DBS

I strongly suggest you get the DiSEqC switch since they are quite cheap and greatly simplify things. For now, all you need is a DiSEqC 2x1 switch. The Satworks can handle the switching (someone else can go through the DiSEqC setup for each sat since I don't have a Satworks).

Alternatively you could buy a 22kHz switch and it should work fine in the same wiring configuration with your SG2100. It would not work, however, if you put the switch between the motor and the receiver.

Mr Tony

Nov 3, 2004

Tux
The Pansat & Satwork are different when it comes to a motor. I have found out that this probably won't work. What I've understood it as is that you cant have a motor and more than one LNB's attached to the setup. (the Pansat allows that. Ive done it with a 4x1 switch once)

Since the OP asked if anyone was doing it with his exact setup, all we can do as non Satwork users is speculate whether or not it will work.

Mr Tony

Nov 3, 2004

talrudeboy
The best option is to get a Diseqc switch and try it. You wont hurt anything by trying

TuxCoder

Nov 3, 2004

Iceberg said:
Tux
The Pansat & Satwork are different when it comes to a motor. I have found out that this probably won't work. What I've understood it as is that you cant have a motor and more than one LNB's attached to the setup. (the Pansat allows that. Ive done it with a 4x1 switch once)

Since the OP asked if anyone was doing it with his exact setup, all we can do as non Satwork users is speculate whether or not it will work.

Hopefully they fix this in their firmware... it's a shame, should be such simple functionality (merely different DiSEqC commands for the motor than for the switch).

The 22kHz switch may be the better option then, since that's how the motor gets its commands anyways and passes the tone through. Support for this in the Satworks would be the same as having a motor with a universal LNB. Unless they screwed that up also...

talrudeboy

Nov 3, 2004

Sounds like a plan.
Ok I will re-config the position of my lnb and do some investigation.
I may order a switch just in case.
Thanks guys.
I will let you know if any developements

View all replies (17)

Ramy

Supporting Founder

Last reply 14 minutes ago · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.

145 Replies · 1548 views

Load Replies (145) Reply Legacy View

Reactions: Mike0616

osu1991

Monday at 10:13 AM

View: https://youtu.be/HjQO7IWmC50?is=JrnzyTNTv5MoX24u

Reactions: Jimbo and Foxbat

osu1991

Monday at 9:37 PM

View: https://youtu.be/Dj-pH4x_Z1Q?is=CHrZoqR0K3GnQb35

Reactions: Foxbat and Jimbo

Yespage

Thursday at 4:57 PM

24 team playoff seems to be real close.

Are we really that far from a 64-team tournament?

The benefit of the 24 team playoff:

All the cartel teams that cartels want in playoff are in playoff
- Independent of record too! Bonus.
MONEY!!!!! for the cartels.
I'm out of ideas.

Cons

Regular season really doesn't matter now other than the rivalry games
- Top cartel teams can lose three games and still make the playoff
Going to start resting players?
- The playoff is going to be *checks notes* several games!
- Resting players could make games dumb.
- Maybe even restrict NIL players from games played.
How much are streaming sub costs going up a month to pay for this?!

AZ.

Thursday at 5:30 PM

Yespage said:
24 team playoff seems to be real close.

Are we really that far from a 64-team tournament?

The benefit of the 24 team playoff:

All the cartel teams that cartels want in playoff are in playoff

Independent of record too! Bonus.

MONEY!!!!! for the cartels.

I'm out of ideas.

Cons

Regular season really doesn't matter now other than the rivalry games

Top cartel teams can lose three games and still make the playoff

Going to start resting players?

The playoff is going to be *checks notes* several games!

Resting players could make games dumb.

Maybe even restrict NIL players from games played.

How much are streaming sub costs going up a month to pay for this?!

One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.

We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.

Jimbo

Thursday at 5:47 PM

AZ. said:
One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.

We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.

There are 68 Power 4 teams, so eventually they will get there I wouldn't imagine ...

AZ.

Thursday at 9:12 PM

Jimbo said:
There are 68 Power 4 teams, so eventually they will get there I wouldn't imagine ...

Far from it but you know that....You dont like the larger playoff.....Its ok.....

Jimbo

Thursday at 9:24 PM

AZ. said:
Far from it but you know that....You dont like the larger playoff.....Its ok.....

Oh, I Hate the idea ...

It would be different if it was a game that you could play 2 or games each week, but when you only play 1 game a week, the larger playoff is Not a good thing ...

The season has how many games now, is it 14 ... then you want to play another 5 (with more to come) against Top 12 (eventually 24 teams) ... remember, the 5 games in the playoffs will be the hardest games all year and back to back.

For example, IF Ohio State should win it all this year ... they play 5 teams in the Top 25, plus they would play 5 more to win it all, depending on how the ranking shake out and if Bye weeks are given.

Thats 10 Ranked teams ... in one year ...
I don't see that happening very often ...
Edit, Bama plays 4, Georgia plays 3, But Ole Miss plays 5 (didn't expect to see that)

That said, I don't see the Buckeyes winning it all this year.

Reactions: AZ.

AZ.

Thursday at 9:27 PM

Jimbo said:
Oh, I Hate the idea ...

It would be different if it was a game that you could play 2 or games each week, but when you only play 1 game a week, the larger playoff is Not a good thing ...

The season has how many games now, is it 14 ... then you want to play another 5 (with more to come) against Top 12 (eventually 24 teams) ... remember, the 5 games in the playoffs will be the hardest games all year and back to back.

For example, IF Ohio State should win it all this year ... they play 5 teams in the Top 25, plus they would play 5 more to win it all, depending on how the ranking shake out and if Bye weeks are given.

Thats 10 Ranked teams ... in one year ...
I don't see that happening very often ...

That said, I don't see the Buckeyes winning it all this year.

Yes anyone here knows you 100%....Astros failed no posting...Ohio state loses we hear it.....Its ok....Its called an opinion....I have one so do you.....Problem is?

Reactions: meStevo and Yespage

Jimbo

Thursday at 10:07 PM

AZ. said:
Yes anyone here knows you 100%....Astros failed no posting...Ohio state loses we hear it.....Its ok....Its called an opinion....I have one so do you.....Problem is?

Seeing theres very little activity in the MLB threads, it wouldn't matter if I posted that the Astros didn't make the Playoffs ...

Theres more NFL info in the Pub section than in the Sports/NFL thread.

Reactions: meStevo and AZ.

Jimbo

Thursday at 10:54 PM

IF they go to 24 teams, and it looks like they will soon ....
Do we Really want Teams with 3 and 4 losses in the Playoffs ?
Is a 3-4 Loss team one thats able to win 4-5 more games against Top teams ?

Yespage

Yesterday at 10:04 AM

AZ. said:
One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.

A 12 team playoff net should catch any undefeated team. The 12 team playoff also exposed that rankings suck. I mean, we kind of knew already that the rankings weren't particularly reproducible, but we now have the empirical evidence that the rankings suck because judging who is the best among a mickey mouse scheduled football season isn't a rational endeavor. So the 12 team playoff ensures most teams that should make it, do, including the mid-major undefeated team. 8 teams should be able to work as well, but puts greater risk at OSU and Alabama missing the playoff... can't have that.

Which is the run up to my main problem with the 24 team set up is that it is designed to keep the OSU's and Alabama's from missing the playoff. The cartels are ensuring widespread participation for their own cartels to increase the monetary reward to themselves. It is fixing the system while not fixing the outcomes, merely making the regular season game outcomes virtually irrelevant. Sure, a bye for winning the conference would be nice, but we've already seen that byes aren't that influential.

AZ. said:
We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.

That is college football in a nutshell. Again, college football isn't about competition, it is about revenue. The entire setup is about making money, from regular season squash games against local jobbers like the WWF days to tax exempt bowl games.

And to add to the first world woes, the college football cartels have made being a College Football fan even more expensive... so they can get paid more.

Reactions: osu1991 and AZ.

meStevo

Yesterday at 6:20 PM

Jimbo said:
Theres more NFL info in the Pub section than in the Sports/NFL thread.

Nah, you just don't understand how ignore works, which is why you made your own NFL thread thinking there wasn't one

Howard Simmons

46 minutes ago

osu1991 said:
View: https://youtu.be/Dj-pH4x_Z1Q?is=CHrZoqR0K3GnQb35

Down Goes the SEC

Foxbat

14 minutes ago

osu1991 said:

They ought to have fun with this… :devilish

View all replies (145)

TheRatPatrol

Last reply 18 minutes ago · posted in TV Shows

NCIS

Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?

2135 Replies · 214793 views

Load Replies (2135) Reply Legacy View

Jimbo

Monday at 11:41 PM

View: https://www.youtube.com/shorts/BIdMzUBHvjw?feature=share

Reactions: Howard Simmons

Jimbo

Tuesday at 6:25 PM

Jimbo said:
View: https://www.youtube.com/shorts/BIdMzUBHvjw?feature=share

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?

Reactions: Howard Simmons

Howard Simmons

Thursday at 1:19 PM

Jimbo said:
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?

Tony as the director.

Jimbo

Thursday at 2:13 PM

Howard Simmons said:
Tony as the director.

Would you rather have LaRoche ???

Reactions: Howard Simmons

Howard Simmons

Yesterday at 11:30 AM

Jimbo said:
Would you rather have LaRoche ???

No. Bring in someone new.

Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.

Jimbo

Yesterday at 12:50 PM

Howard Simmons said:
No. Bring in someone new. Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.

I don't think Tim and Tony are that far apart in Age ...

Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)

Tony has changed, he's been running his Security Business ... I'm sure he has grown up.

Give it time ... your judging the New Tony from the old Tony.

It sounds like Tim won't be around the Team much longer either.

Reactions: Howard Simmons

KAB

Today at 6:18 AM

I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.

Reactions: Howard Simmons and reubenray

Jimbo

Today at 7:40 AM

KAB said:
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.

I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...

Reactions: Howard Simmons

Jimbo

18 minutes ago

KAB said:
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.

Teased Meeting ?

View all replies (2135)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply 47 minutes ago · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68513 Replies · 2671750 views

Load Replies (68513) Reply Legacy View

Reactions: c-spand

Bobby

Today at 11:16 AM

It's Five O'Clock Somewhere - Alan Jackson

Reactions: long_time_Dish and RaiderPower

harshness

Today at 12:00 PM

Somewhere - Barbra Streisand

sdfntx

Today at 12:41 PM

Somewhere in Time - John Barry

Reactions: long_time_Dish and FTA4PA

long_time_Dish

Today at 4:29 PM

In Time - Kit Watkins

dishstaller

47 minutes ago

Time In a Bottle - Jim Croce

View all replies (68513)

Lon.TV

Today at 7:22 PM · posted in Lon.TV

Local AI Coding from Scratch: A Practical Beginner's Guide

Time for another AWESOME video from Lon Seidman of LON.TV!

View: https://www.youtube.com/watch?v=XBnhKwMxIhs

Direct YouTube Link - Local AI Coding from Scratch: A Practical Beginner's Guide
The Official LON.TV Website
Lon on Facebook

0 Replies · 4 views

Replies Reply Legacy View

brittanygarden

Staff member Pub Member / Supporter

Last reply Today at 7:20 PM · posted in DISH Network Support Forum

Are you experiencing an issue with your 3rd party remote since the newest Hopper update?

Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany

23 Replies · 704 views

Load Replies (23) Reply Legacy View

Reactions: That American Girl, Foxbat, RTCDude and 5 others

david_jr

Oct 5, 2026

I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version

Reactions: long_time_Dish, Almighty1 and charlesrshell

bookworm370

Monday at 9:50 AM

I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!

Reactions: david_jr, navychop, long_time_Dish and 4 others

GRB1959

Monday at 10:31 AM

bookworm370 said:
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!

Excellent suggestion.

Reactions: bookworm370, long_time_Dish, Almighty1 and 1 other person

david_jr

Tuesday at 6:15 PM

david_jr said:
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version

BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?

Reactions: long_time_Dish and charlesrshell

Foxbat

Tuesday at 6:49 PM

I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.

Reactions: charlesrshell

JeffN9

Tuesday at 7:14 PM

Foxbat said:
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.

I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won

Reactions: Foxbat and charlesrshell

bookworm370

Today at 3:13 PM

GRB1959 said:
Excellent suggestion.

Yea, I've only been a CIO for the last 30 years!

Trust me, when something important breaks, they get to own it!

Reactions: Almighty1 and charlesrshell

Astroman3427

Today at 7:20 PM

Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July.

Reactions: charlesrshell

View all replies (23)

JohnGalt1234

Last reply Today at 7:18 PM · posted in DISH Network Support Forum

H3 EHD lists upcoming airings instead of recordings on EHD and often won't recognize EHD is connected after reboot

This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!

21 Replies · 270 views

Load Replies (21) Reply Legacy View

Almighty1

Today at 6:55 PM

Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.

Reactions: charlesrshell

JohnGalt1234

Today at 6:55 PM

Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.

Reactions: charlesrshell

JohnGalt1234

Today at 6:56 PM

JohnGalt1234 said:
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.

Reactions: charlesrshell

JohnGalt1234

Today at 7:00 PM

Almighty1 said:
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

View attachment 194853

This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.

The image I just sent for master H3 is on hopper+., casino is not but both Vs and bootstraps are the same.

Reactions: charlesrshell

Almighty1

Today at 7:18 PM

JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

Reactions: charlesrshell

View all replies (21)

dfergie

Staff member HERE TO HELP YOU!

Last reply Today at 7:14 PM · posted in What's Cooking?

Homemade Breakfast Sausage

Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...

42 Replies · 3609 views

Load Replies (42) Reply Legacy View

Reactions: spongella

navychop

Today at 8:14 AM

Bob Evans Sage.

reubenray

Today at 8:41 AM

navychop said:
Bob Evans Sage.

I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

Reactions: navychop

dfergie

Today at 10:17 AM

They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)

Reactions: reubenray

TRG

Today at 6:19 PM

reubenray said:
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

reubenray

Today at 6:38 PM

TRG said:
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848

No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.

TRG

Today at 6:41 PM

reubenray said:
I live in the heart of Walmart land.

My deepest condolences.

reubenray

Today at 7:14 PM

TRG said:
My deepest condolences.

Surprisingly I moved here from the Gulf Coast due to the heat. But it has been hotter here due to the heat domes than it did down there.

View all replies (42)

TWiT Tech Podcast Network

Today at 6:43 PM · posted in TWiT Tech Podcast Network

Untitled Linux Show 275

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=ewCzxcofBUw

Direct YouTube Link - Untitled Linux Show 275
TWIT's Website
TWIT Live Feed

0 Replies · 8 views

Replies Reply Legacy View

Peter Parker

Supporting Founder Lifetime Supporter

Last reply Today at 6:40 PM · posted in DISH Network Support Forum

DISH Hopper 3 Software Version 713 Is Out

No idea what improvements might be involved.

12 Replies · 573 views

Load Replies (12) Reply Legacy View

Reactions: LQQK and reubenray

cpdretired

Oct 7, 2026

Two bugs out and three new bugs in.

Reactions: long_time_Dish, dishstaller and charlesrshell

Almighty1

Oct 7, 2026

Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Reactions: charlesrshell

dishstaller

Oct 7, 2026

cpdretired said:
Two bugs out and three new bugs in.

Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.

Reactions: charlesrshell

bookworm370

Monday at 9:56 AM

dishstaller said:
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.

Reboot just fixes it for a short time and then it's back to messed up

Try going exclusively to an IR remote and you will see the pain

Reactions: long_time_Dish and charlesrshell

Almighty1

Wednesday at 7:51 PM

Almighty1 said:
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Within the last few hours as I did check earlier today when it was still missing, the Available Joey Software line now has added "P154 P15403" which is for the Hopper Plus that I have but my Hopper Plus software is still on P15317, I will do a Download Android TV (ATV) Software for the Hopper Plus, Joey 4 and Wireless Joey which are all Android TV devices and then manually do a check update on the Hopper Plus to update the software shortly.

Reactions: charlesrshell

BatStang2000

Today at 1:29 PM

This happened to me. I was outside mowing and my wife came out and said that our nieces and nephews were going to be on the Noon News. She had it on in the bedroom on our Joey3. Since they weren't on yet, I decided to turn it on in the Living Room on our Hopper3. When I selected the channel (through Dish, not OTA) the Joey3 turned itself off. When I went back to the bedroom to turn it back on, the Hopper3 did a reboot. Luckily it all finished before their story came on, but I just found it strange.

Reactions: Almighty1 and charlesrshell

bookworm370

Today at 3:17 PM

Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.

Reactions: charlesrshell

reubenray

Today at 6:40 PM

I got the 713 update yesterday.

Reactions: charlesrshell

View all replies (12)

TWiT Tech Podcast Network

Today at 4:42 PM · posted in TWiT Tech Podcast Network

AI vs. Coders & Mathematicians: The Great Disruption #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/E-QczD5oEh4

Direct YouTube Link - AI vs. Coders & Mathematicians: The Great Disruption #shorts
TWIT's Website
TWIT Live Feed