I got my 22KHz SW today and went up in the roof and installed it,but it did not work,i don't know if it was the bad snowy weather that hit MAS,i end up putting there a 4x1 Chieta SW that came with the receiver didn't work either with the set up i wanted,here goes what i wanted to do.
I connected a cable strait from the 031 invacom linear side to the 22KHZ input, and one cable strait from the Dpro circular LNB to 0KHZ input,and outputted to the receiver
the reason i wanted to do this set up is that when somebody is watching Say 101W Channels on the other receiver i can watch 110w Free Disc HD Theater at same time in other receiver
well since it was starting to fall a snow storm i didn't try other ways so i ended up connecting strait from the 031 Invacom one from the linear side and one from the circular side to the Chieta Switch and the output to the receiver and it works ok on circular sat but very unstable on Linear Sats,don't know if is do to bad weather but most linear Sat's have weak signal,
My question is! can i put 2 -4x1 diseqc switches connected to LNB invacom 031
L/C and C/L ports, and feed both diseqcs for 2 receivers with one feeding the motor.
please give diagram for best set up for two receivers one motor,using either the
22KHz Ecoda and the 2 -4x1 switches ,Thanks in advance
You didn't say if you cut the 22 khz switch on in the menu of your receiver.
I recently installed a BSC621 lnb on my BUD, which has an internal 22 KHZ switch to switch between C and KU band.
Well, you also have to go into the menu of your receiver and cut the 22 KHZ frequency switch "ON" on every KU band satellite in order to make the switch between the C and accompanying KU satellite.
If I am read you correctly, you want to watch 2 diferent birds or two diferent bands at the same time, via one one cable. If this is the question, it cannot happen. Even two polarities at the same time on one cable will not happen, unless you are using a bandstacked LNB.
That stated, am I understanding you? We can help, but this will probably be moved to the FTA area rather than the shack, But then again you will need at least one cable from each receiver to the switch. Then at least on cable from each port of the LNBs to the switch. I hope that is not too confusing.
POP
Hi Guys: why when i put in Tp 12224 and go to 110w it says Nimick 82W on top corner? i get chan on 110.scrambled of course.
I know my dish is well aligned ;get 61.5,72,74,79.83,85,87,89,91,93,95,97,99,101,
103,107.7,110,119,125,
If I am read you correctly, you want to watch 2 diferent birds or two diferent bands at the same time, via one one cable. If this is the question, it cannot happen. Even two polarities at the same time on one cable will not happen, unless you are using a bandstacked LNB.
That stated, am I understanding you? We can help, but this will probably be moved to the FTA area rather than the shack, But then again you will need at least one cable from each receiver to the switch. Then at least on cable from each port of the LNBs to the switch. I hope that is not too confusing.
POP
Hi guys Thanks for trying to help have this equipment.
Dish 36" with 031 quad invacon LNB with the two ports Linear and Circular connected to 4x1 diseqc SW then connected to a Motor SG9120 and then to CaptiveWorks800 receiver. this set up is running fine for the SD Cworks.
Now i have an HDNfusion that i connect strait to the remaining Linear port without Switch.
it also runs good,
now i aquired a Ecoda 2x1 22KHZ Sw.
and also Have a Small Fix 500 DP dish with a Dp LNB pointed at 110W,
i'd like to combine the Linear spaire port on the big dish with the DP LNB on the Ecoda 22KHz Sw to feed my Nfusion so i can get DiscoveryHDtheater free FTA Chan only.
how can i set up the 22khz switch? thanks in advance.
Thanks guys for trying to help i was successful but i struggled a little bit cause i had also bad plugs so i changed the 3 end plugs and glad i did cause after installing the SW had no signal at all, so bellow is the settings for someone that needs it. this set up is for, if you have a dn fix 500 dish with Dp LNB pointed to 110W and you have a motorized system and want to watch 110w without bothering your wife that is watching some other sat ,of course you also can watch whatever sat in the motorized system.
If you use 22KHz switch then in receiver Dish settings you need to have the following .
Say you have the 110 connected to the Zero side of the switch, then in Antenna setting for 110w you will have the following:
LNB Type: OCSDP
LNB Freq: 11250
Transponder: 12224
Diseqc Sw: Port 2
22KHz Sw: OFF
Now if the Linear Sat cable is connected to the 22KHz side of the switch, then the follow: in Antenna Settings:
LNB Type: Standard/Single
LNB Freq: 10750
Transponder: Depends on what Sat.
22KHz Sw: ON
Diseqc Sw: None.
National (50-States or wide/NAT+PR beams) Local (Local-Into-Local or narrow/Spot beams)
Additional tabs provide:
OTA the (Over-The-Air) Database VOD (Video On_Demand) Records Offline Records Engr Records Net Decoder a graphic presentation of all satellites and transponders
Monday 11/2 is a full slate for NBA League Pass as all 30 teams are playing and 14 out of 15 total games are on NBALP. Only one national TV game on Peacock/NBCSN (Thunder @ Cavs).
DirecTV is even having to use several MLB EI channels (from 745-748) and a NHL CI (770) channel to fit all of them in the guide close together. 5 games at 7:30 ET, 3 games at 8 ET, 2 games at 8:30 ET, 1 game at 9 ET, 3 games at 10 ET. Luckily NHL CI is light on Monday (3 games on CI).
DirecTV is providing both broadcast feeds for all League Pass games except Hornets, Magic, Bucks & Raptors that night. These are all teams that have local broadcasts via a OTA channel which is on spotbeams and have streaming deals (DTC) that are not exclusive DAZN teams which DirecTV just signed a deal with (à la Spurs, Grizzlies, Cavs, Pacers & T'Wolves). Its also very common that we don't get Raptors broadcast very often from TSN or Sportsnet Ontario on League Pass.
Only the Knicks, Nets, Wizards, Bulls, Celtics, Rockets, Lakers, Warriors, Avalanche, Sharks and Bruins feeds will be using remaps of 24/7 RSNs that night. The rest will be relying on the part time feeds, including the Nuggets, Blackhawks and Kings who will be on their alt/overflow channels, and MSG Western NY will be live on channel 635-1 to carry Buffalo area ads during the Knicks game.
The NHL Network alternate will be live on channel 215-1 with Red Wings @ Panthers for those blacked out of Golden Knights @ Bruins on the main feed.
The Thunder @ Cavaliers game will be on one of Peacock Game Pass channels that night for commercial customers, they'll also have the back to back U-Conn Women's and Men's Basketball. One of the part time feeds will also be in use for WWE Raw via Joe Hand promotions.
He’s forever known for playing Jean-Luc Picard and Charles Xavier, whom he “admired for their morality, for their kindness, for their sensitivity, for their compassion.”
Since it was already "paid" for, I spent the two hours of my time watching the John Cena action movie on Apple TV, "Matchbox The Movie" even though the reviews were brutal. It was better than I expected, so I didn't feel like I had wasted an afternoon watching it. But it felt like another "Reacher"/"Neghley"/"Mission: Impossible"/"Fast & Furious" crash and blow stuff up with lots of automatic gunfire mixed in movie featuring covert CIA operatives.
I don't think we'll get a follow-up movie from this. I expect Mattel will have other toy lines to exploit.
It states the average amount they are under water is OVER $7,000.
Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I did another security update and it required me to reboot the server.
I also did a patch for something else and accidently put two ;'s in the config file so when the server rebooted it wouldn't restart a service because of the extra ; in the config file.
And of course as I did it my step dad called me slowing me down in figuring it out.
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
I'd probably say when they came up with their M-series of processors with integrated memory. That allowed Apple to get away from the inefficient Intel CPUs that were limiting their notebook computers.
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....