the good 'n the bad:
Well . . . the picture is a little soft, much as I imagined it should be...
Not really any significant ringing on sharp-edged text.
I'm experimenting on a 22" wide-screen LCD.
The native resolution is 1680x1050 (which is a supported mode of the converter).
My first test was with a DishNetwork
DTV Pal, digital OTA converter box, and outputting
composite video.,
Wide screen 1080 and 720 stations looked appropriate, and 480 sub-channels were stretched wide a bit.
That's really the function of the source video.
Expecting much better picture from
Svideo source, I then connected a Channel Master
CM-7000 converter box.
It handles 16x9 vs 4x3 video a little differently, but seems to work fine if you press the
Wide button on the remote, to get a satisfactory picture.
Can't say the picture looked any differently.
Many FTA receivers have
component output, and the converter will take that format.
It
should give a better picture, but I've not yet tried the mode.
One disappointment in picture quality, comes from poor gamma.
I'll see if the monitor has some adjustment to to improve quality.
However, for the purpose of FTA tune-up, the picture is fine. -

I'll try to post some pix this weekend.