Social Feed

outbackjack
Last reply · posted in Free To Air (FTA) Discussion
i know this is two opposite sides of the spectrum for questions but i have been reading how adding a spacer can improve the 741s ku reception. i have one i bought a while ago laying around with a conical scaler ring and was going to try it as minibud. is it better to dump on fleebay or put it on the dish? or would my time be better spent getting a hd card for the computer? which one might bring better gains? missed hd channels on ku or a minibud trial and error?
16 Replies · 2873 views
outbackjack
crackt your right about that. each do have their own issues. and the most money in the pocket is best:) i will check out the dvbworld s2 w blindscan for my purchase. thanks for the recommend. i doubt i will get much with the dmx on this dish but i love tinkering and will trek to the hardware store to mod the lnb with the spacer.
1ADAM12
DMX741 / BSC621 Spacer

i doubt i will get much with the dmx on this dish but i love tinkering and will trek to the hardware store to mod the lnb with the spacer.

I "rolled" up some aluminum roof flashing to make a 1/2" spacer. Used super glue and tape to keep it from unwinding.

Both BSC621 and DMX741 now have the same focal length for C and Ku. C band is very good and Ku is good on 1.2 GeoSat Pro dish.
dashaund
I've been using my DMX741 for almost a year now on my 10 footer. It works great, especially for the money! If you're hardcore about milking every signal strength point you can get, then a pair of commercial grade C-band LNBs would be the way to go. But for your typical enthusiast, I don't see how you can go wrong with the DMX741. I think it's a darn good LNBF, especially for the price tag.
outbackjack
1adam12 i never thought of using homemade metal. i am going to try stovepipe ;aying around to make that offset. it should be fun modifying. did you get the longer screws at the hardware store? i think i might be able to find the same size if possible. what did you use as the spacers for the screws?
1ADAM12
Hillman Hardware

did you get the longer screws at the hardware store? i think i might be able to find the same size if possible. what did you use as the spacers for the screws?

If you have an ACE or True Value by you, look in the Hillman Hardware drawers for both items. Poor memory but maybe a M3 22MM long for the screws. They had 1/2" spacers in metal, got the last three. They also had plastic spacers about 1 1/4" LONG so I chucked them in the drill and used hacksaw blade to cut to length.:D

Have fun!

Adam
outbackjack
well here is what happened. it made the 1/2 inch bought the screws and i could get 87-99 at 63-65 percent. nothing cane in despite the settings. so the end of the night i switched back to the spitfire. i made no changes on the dish or motor but now i have nothing locked so i am back to square one. i think i didnt tighten the dish enough when i put the dmx on and it moved the settings. so nothing is locked on any sat with the spitfire. i might just give up on the dmx and do what quapo did and have a c to the side of the ku. but what was cool was locking c at any signal.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67107 Replies · 2662292 views
  • Like
Reactions: c-spand
harshness
Time After Time - Cyndi Lauper
  • Like
Reactions: long_time_DNC
sdfntx
Right on Time - Brandi Carlile
gms49ers
Time Stand Still - Rush
  • Like
Reactions: long_time_DNC
Bobby
I Can't Help It (If I'm Still In Love With You) - B.J. Thomas
long_time_DNC
Help Is On Its Way - Little River Band
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views
T
· posted in DISH Network Support Forum
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
0 Replies · 14 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5389 Replies · 334599 views
TRG
TRG
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

20260503_145250.webp
  • Like
Reactions: Bobby and dfergie
dfergie
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

View attachment 191651
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
  • Like
Reactions: TRG
TRG
TRG
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
I've been retired since October. It was very strange at first. But I'm loving it now.
  • Like
Reactions: dfergie
TRG
TRG
Creamy flat chicken enchiladas with green chile, beans and rice.

enc.webp
  • Like
Reactions: dfergie
dfergie
Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi
IMG_5609.webp
  • Like
Reactions: TRG and Bobby
TRG
TRG
I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.


hdog.webp
  • Like
Reactions: Bobby and dfergie
N5XZS
Last reply · posted in Over the Air Television By RabbitEars.Info
New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.😎
10 Replies · 153 views
N5XZS
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2
  • Like
Reactions: comfortably_numb
comfortably_numb
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet :)
N5XZS
Yes that's a good channel MovieSphere, only thing is the missing CC on it. :rolleyes: :hatsoff2
  • Sad
Reactions: comfortably_numb
comfortably_numb
According to the FCC listing, the tower is near I-40 and Juan Tabo:

primestar31
According to the FCC listing, the tower is near I-40 and Juan Tabo:

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.
  • Like
Reactions: comfortably_numb
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
6 Replies · 96 views
zippyfrog
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

1781191675068.webp
  • Like
Reactions: charlesrshell
T
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
zippyfrog
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

1781195549844.webp
  • Like
Reactions: charlesrshell
MikeD-C05
These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.
T
Does cable charge box rent?
  • Like
Reactions: charlesrshell