Social Feed
Supporting Founder
Bought this projector from Amazon a couple of weeks ago. I've been having some issues, but I will place them in a response further down.
The projector is well packed and very easy to set up. It is quite large by today's standards and doesn't have a lot of style. Kind of a big white box 6"h x 18"w x 14"d.
The remote is easy to understand and is backlit, Although most of us will likely set and forget. I already have my Harmony set up to control it. The projector has 2 ir sensors, and I get good remote response, even when bouncing off the 'screen'
Ventilation is good with a large outlet port on the front and filtered input port on the rear. The filter is paper and easily accessible. Everyone says the filter needs to be cleaned at frequent intervals. Since it is paper, I would recommend keeping a spare around as simple cleaning won't get the crud out of the paper after awhile. Haven't priced filters yet.
I bought this unit over others mostly because of the lens offset feature. Unlike other projectors in this class, the projector does not have keystone adjustment. Instead there is a pair of mechanical wheels that will offset the picture horizontally and vertically. They work very well and provide a wide range of adjustment. You level the projector and get it square to the wall and then use the offset feature to place the image. Some have complained that the adjustments are sloppy, but I had no trouble getting the image exactly where I wanted it. Once it was set, it did not wander. I was interested in the lens shift feature because a keystone adjustment will affect resolution to a surprising degree. The lens shift feature is purely optical, so does not hurt resolution.
The projector is extremely bright. It is too bright at its highest settings, even with room lights on. It has different preset modes for various light conditions and viewing habits. I have found natural and theater dark1 to be good starting points.
This projector uses LCD panels for image generation. Many of the others are DLP based. This means that the absolute contrast ratio is a little lower on this set. Epson has addressed this by adding an automatic iris feature that will lower the output light levels in darker scenes. The slew rate is adjustable from the menus.
That brings us to noise levels. The fan is whisper quiet. I have the projector temporarily set up about 3 feet behind and 2 feet above the seating position. I cannot hear the fan even when sound is off. I do hear the BluRay disk spinning, but not the projector. However, the automatic iris is fairly loud and can be heard at softer volume levels. Many people turn this off, or move it to the slow slew rate.
Color reproduction is as good as I have seen from a projector. Not quite up to my Panasonic plasma, but some of that might be that I am still projecting onto a white wall.
The projector is currently about 15 feet back from the wall and has no problem projecting a 130" image. The manual zoom has over a 2:1 range, so that coupled with lens shift makes setup easy and very flexible. I had this set up and running in less than 10 minutes, including unpacking the box.
Epson claims a 4000 hour lamp life. Some have reported significantly less than that, but Epson has been very responsive with replacements and upgrades. It seems like there was a problem with early units and several folks have reported that their units were exchanged after early bulb problems. This has been reported as having been fixed, but the newer units haven't had much of a chance to build up hours yet, so we will see.
Geometry is excellent. I have looked at the patterns and everything is spot on. Convergence is also perfect. Some have reported some pixel shift on reds in the corners, but I don't see it. Again, most of the complaints came from early production units.
The key is in the viewing. The set does its job and I quickly become immersed in the theater experience. The image is better than at my local cineplex and with a 130" image viewed from 12' back, about the same impact. I am able to totally forget the projector and enjoy the movie, which at the bottom line is where you need to be.
The projector is well packed and very easy to set up. It is quite large by today's standards and doesn't have a lot of style. Kind of a big white box 6"h x 18"w x 14"d.
The remote is easy to understand and is backlit, Although most of us will likely set and forget. I already have my Harmony set up to control it. The projector has 2 ir sensors, and I get good remote response, even when bouncing off the 'screen'
Ventilation is good with a large outlet port on the front and filtered input port on the rear. The filter is paper and easily accessible. Everyone says the filter needs to be cleaned at frequent intervals. Since it is paper, I would recommend keeping a spare around as simple cleaning won't get the crud out of the paper after awhile. Haven't priced filters yet.
I bought this unit over others mostly because of the lens offset feature. Unlike other projectors in this class, the projector does not have keystone adjustment. Instead there is a pair of mechanical wheels that will offset the picture horizontally and vertically. They work very well and provide a wide range of adjustment. You level the projector and get it square to the wall and then use the offset feature to place the image. Some have complained that the adjustments are sloppy, but I had no trouble getting the image exactly where I wanted it. Once it was set, it did not wander. I was interested in the lens shift feature because a keystone adjustment will affect resolution to a surprising degree. The lens shift feature is purely optical, so does not hurt resolution.
The projector is extremely bright. It is too bright at its highest settings, even with room lights on. It has different preset modes for various light conditions and viewing habits. I have found natural and theater dark1 to be good starting points.
This projector uses LCD panels for image generation. Many of the others are DLP based. This means that the absolute contrast ratio is a little lower on this set. Epson has addressed this by adding an automatic iris feature that will lower the output light levels in darker scenes. The slew rate is adjustable from the menus.
That brings us to noise levels. The fan is whisper quiet. I have the projector temporarily set up about 3 feet behind and 2 feet above the seating position. I cannot hear the fan even when sound is off. I do hear the BluRay disk spinning, but not the projector. However, the automatic iris is fairly loud and can be heard at softer volume levels. Many people turn this off, or move it to the slow slew rate.
Color reproduction is as good as I have seen from a projector. Not quite up to my Panasonic plasma, but some of that might be that I am still projecting onto a white wall.
The projector is currently about 15 feet back from the wall and has no problem projecting a 130" image. The manual zoom has over a 2:1 range, so that coupled with lens shift makes setup easy and very flexible. I had this set up and running in less than 10 minutes, including unpacking the box.
Epson claims a 4000 hour lamp life. Some have reported significantly less than that, but Epson has been very responsive with replacements and upgrades. It seems like there was a problem with early units and several folks have reported that their units were exchanged after early bulb problems. This has been reported as having been fixed, but the newer units haven't had much of a chance to build up hours yet, so we will see.
Geometry is excellent. I have looked at the patterns and everything is spot on. Convergence is also perfect. Some have reported some pixel shift on reds in the corners, but I don't see it. Again, most of the complaints came from early production units.
The key is in the viewing. The set does its job and I quickly become immersed in the theater experience. The image is better than at my local cineplex and with a 130" image viewed from 12' back, about the same impact. I am able to totally forget the projector and enjoy the movie, which at the bottom line is where you need to be.
27 Replies
·
5829 views
One inexpensive screen (I have used) is a white board or a sheet of melamine, works pretty good... 
One inexpensive screen (I have used) is a white board or a sheet of melamine, works pretty good...
thanks don. btw, i'm buying james' dell projector since he's got to upgrade. i know he built his own screen so i'm open for suggestions. should get the projector next week but finances will preclude any type of screen until, at least, late spetember. but i do have white, semi-gloss paint on my walls so it will work in a pinch!
Staff member
HERE TO HELP YOU!
Stargate SG-1 cancelled, Atlantis renewed
Monday - August 21, 2006 | by Darren Sumner
The future of Stargate is in question today, as SCI FI Channel has cancelled the long-running Stargate SG-1, Multichannel News reported today and a GateWorld source has confirmed. The news regrettably follows the airing of the show's milestone two-hundredth episode on Friday.
Stargate Atlantis, meanwhile, has been renewed for a fourth season, with the network hoping to see that the spin-off series can stand alone, according to a source.
Source Gateworld
Monday - August 21, 2006 | by Darren Sumner
The future of Stargate is in question today, as SCI FI Channel has cancelled the long-running Stargate SG-1, Multichannel News reported today and a GateWorld source has confirmed. The news regrettably follows the airing of the show's milestone two-hundredth episode on Friday.
Stargate Atlantis, meanwhile, has been renewed for a fourth season, with the network hoping to see that the spin-off series can stand alone, according to a source.
Source Gateworld
2034 Replies
·
184174 views
Watch Stargate SG-1 for Free Online | Pluto TV
Stargate SG-1 picks up where the blockbuster film left off as the SG-1 team sets out to explore the mysteries of the Stargate and the worlds beyond it in the pulse-pounding series which became a worldwide phenomenon and a science fiction classic. Stream Stargate SG-1 for free on Pluto TV.
pluto.tv
TFLEV
Time for another AWESOME video from TFL Electric Vehicles!
View: https://www.youtube.com/watch?v=-Ca9w7HnuXg
Direct YouTube Link - 2027 BMW iX5 Walkaround & Review // They Have To Get This One Right!
View: https://www.youtube.com/watch?v=-Ca9w7HnuXg
Direct YouTube Link - 2027 BMW iX5 Walkaround & Review // They Have To Get This One Right!
0 Replies
·
6 views
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
Has anyone converted one to FTA? A Frankenstein of sorts...
6 Replies
·
289 views
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit )
)
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68539 Replies
·
2673775 views
Lifetime Supporter
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
116 Replies
·
1848 views
I guess even the patience of us laid-back Hoosiers has its limits:
www.colts.com
Colts relieve general manager Chris Ballard of his duties
Colts Owner & CEO Carlie Irsay-Gordon released a statement Monday announcing the news.
www.colts.com
Be nice to see a Cowboy headline like that.I guess even the patience of us laid-back Hoosiers has its limits:
Colts relieve general manager Chris Ballard of his duties
Colts Owner & CEO Carlie Irsay-Gordon released a statement Monday announcing the news.
M
Can we expect to see a new coach if we say "pretty please?"
I guess even the patience of us laid-back Hoosiers has its limits:
Colts relieve general manager Chris Ballard of his duties
Colts Owner & CEO Carlie Irsay-Gordon released a statement Monday announcing the news.
Can we expect to see a new coach if we say "pretty please?"
Supporting Founder
Lifetime Supporter
No idea what improvements might be involved.
24 Replies
·
1109 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/P4_TzYKwcNY
Direct YouTube Link - This is iPhone Duo!
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/P4_TzYKwcNY
Direct YouTube Link - This is iPhone Duo!
The official iJustine Website's Website
Buy her book!
0 Replies
·
25 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/-O2iLThF4z8
Direct YouTube Link - Generative AI: Revolutionizing Game NPC Dialogue & Behavior? #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/-O2iLThF4z8
Direct YouTube Link - Generative AI: Revolutionizing Game NPC Dialogue & Behavior? #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
24 views
Staff member
HERE TO HELP YOU!
7 Replies
·
121 views
Howdy folks long time no write.
Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.
What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.
I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.
What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)
In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).
Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).
Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )
Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).
So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?
Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.
p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.
Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)
[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.
What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.
I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.
What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)
In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).
Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).
Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )
Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).
So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?
Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.
p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.
Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)
[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
9 Replies
·
361 views
With the microHD connected this afternoon and tuned to the Weigel mux, I can receive the mux well.
My conclusion is that the sensitivity of the receivers in descending order of sensitivity is as follows:
My conclusion is that the sensitivity of the receivers in descending order of sensitivity is as follows:
- V9 Prime (best)
- microHD
- Edision osmio4k+