Yes, that is the same as mine,except my frame bends over the roof pitch.
So, I will have to block the arm up,so the center of LNB is at the same height as the original V Sat LNB,Right?
I am using it flat on the ground with two more dishes added to it on each end, between the 10 Solid cement blocks that fill up each end for ballast.
I kept the 48" x 52" dish in the middle where it was mounted and bolted a piece of 15 1/2" x 12" diamond plate steel to the frame on each end as a base mount,then I welded and braced a pole on another piece of steel,that gets bolted to base mount plate and shimed.
These outside poles mount the 6" mesh and the 90 Hot Dish a little taller than the middle one.
I bolted it down to two pressure treated 4" x 4" to create runners so I can pull it with the 4 wheeler,to whichever spot works best,around the trees and plumb the platform level, then drill and pound rebar thru 4x4 into ground.
Thanks Alemmoe