Jsattv.
I use both Filezilla and MaZEdit 3.0.
Remember the following for your FTP/TelNet Client server:
HOST = "IP address" of the AZBox
USER = "root"
Password = "azbox"
FTP port = "21"
TelNet port = "23"
Remember thes rules for your AZBox SETTINGS > "INTERNET":
NETWORK: WiFi or WIRED
IP SETTING: DYNAMIC (DHCP) or STATIC
IP ADDRESS: AZBox IP address selected and assigned by you (192.168.XXX.XXX)
SUBNET: 255.255.255.0
GATEWAY: ROUTER IP address
DNS1: Your internet providers gateway or "Dynamic Name Server" address
DNS2: Ignore this in most cases, just leave at defualt. It is used when you have multiple internet service providers or accounts.
Remember these rules for your AZBox SETTINGS > "NETWORK SERVICE":
SSHD: SEE NOTE 1
FTP SERVER: ENABLED
FILE SERVER: ENABLED
DYNAMIC DNS: SEE NOTE 2
TELNET SERVER: ENABLED
NOTE 1: This item may be set to either enabled or disabled, you would need to be more familiar with LINUX systems than I am to be able to utilize it fully and properly.
Excerpt from wikipedia... Secure Shell or SSH is a network protocol that allows data to be exchanged using a secure channel between two networked devices.[1] The two major versions of the protocol are referred to as SSH1 or SSH-1 and SSH2 or SSH-2. Used primarily on Linux and Unix based systems to access shell accounts, SSH was designed as a replacement for Telnet and other insecure remote shells, which send information, notably passwords, in plaintext, rendering them susceptible to packet analysis.[2] The encryption used by SSH is intended to provide confidentiality and integrity of data over an unsecured network, such as the Internet.
NOTE 2: This item in the menu is not necessary for general use. If you select it to be ENABLED, that is fine, but you don't need to set up the settings unless you are really savvy with networking devices and servers. This item is not required for the applications that most of us would normally utilize.
Excerpt from Wikipedia: Dynamic DNS is a method / protocol / network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a Domain Name System (DNS) name server to change, in real time, the active DNS configuration of its configured hostnames, addresses or other information. A popular application of dynamic DNS is to provide a residential user's Internet gateway that has a variable, often changing, IP address with a well known hostname resolvable through standard DNS queries.
Personally, I set all the options in NETWORK SERVICE menu to ENABLED, whether I use them or not. You do not have to apply the setup for FILE SERVER and DYNAMIC DNS to be able to use the FTP or TelNet servers.
More to come in future posts.
RADAR