Social Feed

Main Feed My Feed
Pakbackr
Pakbackr
Last reply · posted in DISH Network Support Forum

HD PQ for primetime Network shows - facial artifacts (or microblocking)

I recently upgraded to a 58 Samsung plasma, 1080p...one very nice TV. I have, however, noticed a huge variation in HD PQ from channel to channel with this set, seeing facial artifacts (or microblocking) that I never saw with the old Panasonic 720 dlp. This problem seems to be most prominent on the major network (ABC, CBS, NBC) primetime shows like Big Bang Theory, Two and a Half Men, 30 Rock, Modern Family, etc. I see similar PQ via the OTA channels, and both live and DVR'd shows. Its not unwatchable, but definitely not the crispness you would expect (and actually get on most programming). Just wondering if anyone else has experienced this? And any thoughts as to what is causing this?
Read more
21 Replies · 2832 views
Load Replies (21) Reply Legacy View
T
thedamaja
Have you tried changing the receiver resolution setting from 720P to 1080i or vice versa?
Read more
Reply
Pakbackr
Pakbackr
thedamaja said:
Have you tried changing the receiver resolution setting from 720P to 1080i or vice versa?
Click to expand...

I have a nice Denon receiver, but I can find nothing in set up menu to do this. BTW, signal is coming into Denon receiver via HDMI, and out to TV via HDMI.
Read more
Reply
gdarwin
gdarwin
Pakbackr said:
I have a nice Denon receiver, but I can find nothing in set up menu to do this. BTW, signal is coming into Denon receiver via HDMI, and out to TV via HDMI.
Click to expand...

It is set on the 622.
Read more
Reply
Pakbackr
Pakbackr
gdarwin said:
It is set on the 622.
Click to expand...

I don't see where that setting is on the 622...can you point me to it?
Read more
Reply
P
primetimeguy
I see artifacts in ALL broadcast content, just the nature of the beast. Not enough bandwidth with current standards. Blu-Ray is the only way to get a near artifact free picture.

To the OP, an 8" larger picture is a huge difference. So you just didn't notice it before. Screen size, viewing distance and your eyesight determine your PQ. So it is more obvious to some that others.
Read more
Reply
L
lobosrul
Welcome to my world. I've been upset for quite a while now on the quality of HD video, which has actually gone down since I first got set up in 2004! I spent a lot of money upgrading my equipment so I expect to get better quality video than what we're getting. Quite a lot of times the quality is so bad I think I'd prefer an anamorphic DVD.

I see compression artifacts on all HDTV channels, OTA or on Dish. Its just a matter of over compression. OTA TV uses MPEG-2 compression, each ATSC channel has about 19Mbps of bandwidth, which is enough for pretty good video quality. 3 of the 4 major networks (what you see ota from FOX is what FOX's headend sends out) use a system in which they deliver a very high bandwidth signal to their affiliates, which in turn re compress it to fit into one ATSC channel. The problem is many stations don't use their entire bandwidth for one channel, they want to cram in an SD (or sometime an HD) subchannel for a bit of extra revenue. That severely degrades the picture quality. Another issues is, for some reason some of the stations in my locality don't use their entire bandwidth. CBS(KRQE) here broadcasts at 17Mbps even though they have no sub station.


Dish uses h.264 compression which is much better than MPEG-2 but they're cramming in 8(!) HDTV channels per 40Mbps transponder. Thats roughly 5 Mbps per channel, which isn't anywhere near enough for 1080i. For comparison, Blu-ray discs generally average around 30Mbps or more for video. As far as your locals go, by the time you see it on Dish the program your watching has already gone through compression at the network, then again at your local affiliate, then yet again by Dish. Dish's HD locals look much softer to me than from over the air.

I have two ways of watching HD. One on my 42" 720p Panasonic plasma. Some channels from Dish look OK on it, others are pretty much unwatchable. The other is a 24" Dell Ultrasharp 1080p monitor, pretty high end. I can't hardly stand watching Dish HDTV on it when sitting at my desk. For some reason Plasma TV's do better than LCD's with poor quality HD, also 720p sets look better as well, someone else smarter than me can probably explain why. You also need to take into account your viewing distance versus the size of your TV. I'd suggest turning your sharpness all the way down, and tweaking the contrast down some as well.
Read more
Reply
gdarwin
gdarwin
Pakbackr said:
I don't see where that setting is on the 622...can you point me to it?
Click to expand...

system setup/HDTV setup
Read more
Reply
Pakbackr
Pakbackr
gdarwin said:
system setup/HDTV setup
Click to expand...

My only visible option asks where I get my analog signal, OTA is selected, 1080, is also selected. Is this what you are talking about?
Read more
Reply
Mojo Jojo
Mojo Jojo
Pakbackr said:
My only visible option asks where I get my analog signal, OTA is selected, 1080, is also selected. Is this what you are talking about?
Click to expand...

On our new 1080p HDTV, I noticed that 720p actually looks better than 1080i. I am not sure why, but everyone else at home seems to agree me with me, too. Maybe it is just the TV or the model of the TV, or maybe it is personal preference. Anyway, it looks much smoother with movement. You should be able to change 1080i to 720p on your Dish HD receiver. I would just try both to see if it makes a difference. I actually tried our other TV, but I saw little or no difference. However, that TV was already 720p to begin with although it can still be set to 1080i. I should also add that playing a Blu-ray on the PS3 looks great on the 1080p HDTV.
Read more
Reply
View all replies (21)
G
Gray Hair
Lifetime Supporter
Last reply · posted in Computers and Gadgets

Repair DX100 American Electrola Radio, AM FM SW?

I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
Read more
24 Replies · 8251 views
Load Replies (24) Reply Legacy View
D
deheza
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Read more
Reply
  • Like
Reactions: Gray Hair
G
Gray Hair
deheza said:
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Click to expand...

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
Read more
Reply
. Raine
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
Read more
Reply
  • Like
Reactions: Gray Hair
O
OZ65
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Read more
Reply
Revenerd
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
Read more
Reply
(((Garyd)))
(((Garyd)))
OZ65 said:
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Click to expand...
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
Read more
Reply
View all replies (24)
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68784 Replies · 2688267 views
Load Replies (68784) Reply Legacy View
  • Like
Reactions: c-spand
harshness
harshness
They Call the Wind Maria - Vaughn Monroe
Read more
Reply
sdfntx
sdfntx
Maria Magenta - Donovan
Read more
Reply
long_time_Dish
long_time_Dish
My Maria - Brooks & Dunn
Read more
Reply
  • Love
  • Like
Reactions: dishstaller, RaiderPower and Bobby
RaiderPower
RaiderPower
My Maria - B.W. Stevenson
Read more
Reply
  • Like
  • Love
Reactions: Bobby, long_time_Dish and FTA4PA
long_time_Dish
long_time_Dish
Don't Lose My Number - Phil Collins
Read more
Reply
View all replies (68784)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

This Week in Tech 1109

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=okJLytKRbDY


Direct YouTube Link - This Week in Tech 1109
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 26 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

The Agentic Web & When AI Agents Escape Their Sandbox

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/rwJNDSWjwDY


Direct YouTube Link - The Agentic Web & When AI Agents Escape Their Sandbox
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 25 views
Replies Reply Legacy View
G
garyreno
Last reply · posted in DISH Network Support Forum

Updated to H715 on a Hopper 3 from H713

After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
Read more
3 Replies · 239 views
Load Replies (3) Reply Legacy View
  • Like
Reactions: Almighty1, reubenray and LQQK
Almighty1
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Read more
Reply
  • Like
Reactions: charlesrshell
jsmit86
jsmit86
Almighty1 said:
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Click to expand...
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Read more
Reply
  • Like
Reactions: Almighty1, reubenray and charlesrshell
Almighty1
Almighty1
jsmit86 said:
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Click to expand...
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
Read more
Reply
  • Like
Reactions: charlesrshell
Ramy
Ramy
Supporting Founder
Last reply · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
Read more
190 Replies · 3616 views
Load Replies (190) Reply Legacy View
  • Haha
Reactions: Mike0616
Ronnie-
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Click to expand...
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Click to expand...
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Click to expand...
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
Of course ... but they Could.
Click to expand...
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Jimbo said:
Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Click to expand...
It was early. Sure.
Read more
Reply
View all replies (190)
dfergie
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
Read more
5453 Replies · 336966 views
Load Replies (5453) Reply Legacy View
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
Read more
Reply
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
Read more
Reply
  • Like
Reactions: dfergie, osu1991 and Bobby
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
Read more
Reply
  • Like
Reactions: Mr Tony and dfergie
dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
Read more
Reply
  • Like
Reactions: TRG
dfergie
dfergie
Juicy Lucy jalapeño burger… Tea
Read more
Reply
View all replies (5453)
Ham Radio 2.0
· posted in Ham Radio 2.0

XTOC: Your Command Center for Off-Grid Communications | LIVE

Time for another AWESOME video from Ham Radio 2.0!


View: https://www.youtube.com/watch?v=GSYzGH16G7s


Direct YouTube Link - XTOC: Your Command Center for Off-Grid Communications | LIVE
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
Read more
0 Replies · 33 views
Replies Reply Legacy View
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

Color blind man sees full colors for first time at age 66

Videos like this can make you appreciate the things we take for granted.


View: https://www.youtube.com/shorts/a2cgQidHQJI
Read more
10 Replies · 266 views
Load Replies (10) Reply Legacy View
  • Like
Reactions: dfergie, NYDutch, Bobby and 1 other person
T
telstar_1
Often people who have organic vision or hearing activated as adults after never having had it cannot practically utilize it because their brains never developed the massive neural network needed to make sense of any of it.

Well, he sees in color, just differently. Can't he just enjoy that? My granny had anachromatic color blindness, meaning pretty much like a b&w tv
Read more
Reply
jayn_j
jayn_j
My son is rg colorblind, but we found there are degrees. If something is vivid red or green, he can see a hint of color. I bought him a pair of the glasses when they first came out. He said they did improve things slightly, but not to the extent they are being touted. I think they are sitting in a drawer somewhere.
Read more
Reply
dishstaller
dishstaller
jayn_j said:
My son is rg colorblind, but we found there are degrees. If something is vivid red or green, he can see a hint of color. I bought him a pair of the glasses when they first came out. He said they did improve things slightly, but not to the extent they are being touted. I think they are sitting in a drawer somewhere.
Click to expand...
Are the glasses one size fits all or do they make different models for different degrees of colorblindness.
Read more
Reply
navychop
navychop
Dr Pol did not like or use his
Read more
Reply
T
telstar_1
dishstaller said:
Are the glasses one size fits all or do they make different models for different degrees of colorblindness.
Click to expand...
It looked like there were at least three iterations to try to match up to the given individual deficit, and a test to take to determine which would best help. But at best they seem a marginal measure and not practical.
Read more
Reply
  • Like
Reactions: dishstaller
View all replies (10)
Linus Tech Tips
· posted in Linus Tech Tips

I Let My Staff Upgrade the Office (They Almost Ruined It)

Time for another AWESOME video from Linus Tech Tips!


View: https://www.youtube.com/watch?v=CrO0Timw2z4


Direct YouTube Link - I Let My Staff Upgrade the Office (They Almost Ruined It)
Linus on Facebook
The LTT Store
Read more
0 Replies · 39 views
Replies Reply Legacy View
Load More
Top
Back