Social Feed

MarkVA
Last reply · posted in FTA Receiver / Equipment Support
I had finally set up my dish positioner with my AZBox a couple of weeks ago and everything was working fine. But, it now seems as if any changes I make to any AZBox setting messes up the limits in my GBox positioner and sends the dish pointing who-knows-where. By "anything," I mean blind scanning, adding a channel to the "favorites" or simply renaming a feed. The error message I get is the "E---02" display in my GBox window. I did a couple of resynch commands with the AZBox turned off to get the GBox positions back in the neighborhood again. With the GBox turned off, I made sure that each of my dish positioner settings had the limits set on "disabled." But, as soon as I turn on the AZBox, the same thing happens.

Am I doing something fundamentally wrong in my settings?

FYI, I've rebooted with and without the GBox powered up. The only thing I haven't done is to physically disconnect the coax and run the positioner as a standalone unit. I'm running the 5020 firmware.

I haven't yet tried the GBox in standalone mode, but will do that tonight. If nothing else, I want to rule out an actuator problem (18 year old Superjack II) as the cause of the E---02 error. I replaced the reed switch less than 6 months ago when it failed with the 4DTV hooked up.

UGH!
13 Replies · 6180 views
AcWxRadar
MarkVA,

Have you (or anyone else here for that matter) researched the G-Box specific error "E-02"?

I am curious what that error means to the G-Box and if the error description might provide more clues as to what the AZBox is fouling up on. I have read many reports of the actual symptoms encountered, but none I recall which cited a specific error code. It might be beneficial to research this code to see if it offers any specific information that can be used to isolate what is really going on.

RADAR

NOTE: I just searched a little bit and found (below) from Sadoun's. However, this description doesn't really relate to the problem at hand as it seems to indicate a problem between the G-Box and the actuator. I offer it up anyway, just in case:

E2 Message on Display:
There is only one error message -- E2 message for GBox. E-2 Message means NO PULSES detected.

Possible causes:

Re-check the wiring connection from the actuator to the GBox
Make sure the actuator is not stopped due to Mechanical Limit.
Check if the Reed Switch Sensor in the actuator is broken.
Check if the Motor is broken.
The Fuse inside the GBox might be broken.
J
MarkVa I have experienced that E...02 error on every Satellite I have stored in my AZbox Prem Plus. It prevents the Dish from moving East and seems to lock it up. The quick fix for me: After finding your strongest Tp Signal - Press Diseqc 1.2 and go into & Press Reset Limits, then scroll down to Store Position, and press it. Now for me here is the important part: Reboot the AZbox Immediately after Storing the Position Do Not Exit, just Reboot and the Limit Goes Away and you can now move the Dish again once the AZbox Reboots back up. I don't know why it works but it does for me on 33 Stored Satellites!! Hope this helps.
MarkVA
MarkVA,

Have you (or anyone else here for that matter) researched the G-Box specific error "E-02"?

I am curious what that error means to the G-Box and if the error description might provide more clues as to what the AZBox is fouling up on. I have read many reports of the actual symptoms encountered, but none I recall which cited a specific error code. It might be beneficial to research this code to see if it offers any specific information that can be used to isolate what is really going on.

RADAR

NOTE: I just searched a little bit and found (below) from Sadoun's. However, this description doesn't really relate to the problem at hand as it seems to indicate a problem between the G-Box and the actuator. I offer it up anyway, just in case:

E2 Message on Display:
There is only one error message -- E2 message for GBox. E-2 Message means NO PULSES detected.

Possible causes:

Re-check the wiring connection from the actuator to the GBox
Make sure the actuator is not stopped due to Mechanical Limit.
Check if the Reed Switch Sensor in the actuator is broken.
Check if the Motor is broken.
The Fuse inside the GBox might be broken.

Radar,

I've been thinking the same thing. On one hand, I generally think that my ~20 year old actuator has finally given up the ghost when these types of problem occur. But, it has been working fine since I replaced the reed switch a few months ago.

I have never seen this error code when operating the GBox in standalone mode. Further, when I use the GBOX to move the dish, the positioning is right on and I never have to bump it, except in high winds. In contrast, I always had to bump the dish when I was using the 4DTV.

The "no pulse detected" would explain why, when the GBox is connected, the counter changes, but the dish doesn't move. I've had to resynch 3-4 times already and, now, the counter can't go high enough to lock in the far western spacecraft. So, a "reset" is next on my agenda.

I guess I will just have to operate in standalone mode until (or if) AZBox finally fixes this problem. That's too bad. Both are quality pieces of equipment, but they just can't talk to each other.

When I get a few minutes, I will call the Sadoun guys and see if I can find anything out, which I will post here for everyone's information.
A
Struggling with a DiSEqC Self-sat Rotor HH90 and Azbox Prem

Not normally someone who can't figure out how to set something up I'm really struggling with configuring by DiSEqC rotor using the azbox. Following Azbox instructions I'm trying to figure out why when I try to position the dish for a satellite my rotor refuses to do anything but swing back and foward without end.

I'm starting to think I am a bit nuts but I'm more worried I am going to burn it out. I've downloaded sat positions and channels via Maz, I then go into Antenna setup, selected a satellite and turned on DiSEqC, entered positioner setup and selected disable limits and clicked ok.. then set the command mode to go to position and tried to move the dish to the required location however it just swings back and foward without end.

What am I missing? Is there a better guide to configuring a DiSEqC dish without using USALS? Am I reduced to begging on forums? Help gladly appreciated..
stanleyjohn
After reading this thread and some others i have decided to continue to use my v-box (standalone)untill this issue is resolved!Havent had any problems yet using the v box as a standalone.
G
Guys, hello, I am having this same issue that my dish wont move (manually it works). It stopped on some extreme position and will not get back automatically to zero, I had to move it manullaly and now I am trying to get it back working automatically. Once, this disabling/resetting limits helpded me, but I cannot find out how it worked, in what sequence...
What exactly should I do? Ive followed what jsattv wrote, and it didnt help. I have an AzBOX Premium, and within the Antenna setup menu, then Diseq, I have possibilities of Disabling limits and Resetting.
It once worked for me, but now I cannot remember.. I use USALS for moving my dish.
teachsac
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Hondo is back with a new squad 9/25 only on Starz.


View: https://m.youtube.com/shorts/b0gPzA8KHEQ
5 Replies · 49 views
  • Like
Reactions: dfergie
b4pjoe
I will probably give it a shot but I don't have high hopes for it.
TRG
TRG
Pass,
K
Never watched the previous shows, so doubtful.
teachsac
Started watching yesterday. Not too bad.
Former member 208119
Last reply · posted in SiriusXM Satellite Radio
My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke :biggrin
238 Replies · 11028 views
B
What i noticed with my last renewal XM is now billing me $4.99 monthly instead of one time yearly payment.
Jimbo
What i noticed with my last renewal XM is now billing me $.99 monthly instead of one time yearly payment.
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
B
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
  • Haha
Reactions: Jimbo
TRG
TRG
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
B
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
Jimbo
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
You get an email every month to let you know they are billing you for the next month.
Foxbat
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango💃🏽

The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
  • Like
Reactions: slow_poke_pete
Jimbo
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango💃🏽

The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
I forgot you can pay that with Ford Pass points, I won't be due again till Feb, but I'll have to remember to try it ... Not sure what needs to be done, but I do have a substantial amount of points currently.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68529 Replies · 2672856 views
  • Like
Reactions: c-spand
long_time_Dish
You Look Like You Love Me - Ella Langley
  • Like
Reactions: dishstaller
dishstaller
See Me Feel Me - The Who
long_time_Dish
Take It Easy On Me - Little River Band
H
TAKE IT As It Comes-The Doors
ClarkGable
Take It To The Limit - The Eagles
jamieh1
Last reply · posted in DIRECTV Programming Forum
The new curated multiview is now live.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
6 Replies · 342 views
K
It's now expanded to a Build Your Own Multiview, currently available to streaming customers with Geminis and Roku, and coming soon to Android TV, Fire TV, Vizio, LG, Apple TV and Tizen.
b4pjoe
It's now expanded to a Build Your Own Multiview, currently available to streaming customers with Geminis and Roku, and coming soon to Android TV, Fire TV, Vizio, LG, Apple TV and Tizen.
But not on the only device they ship out right now which is the Gemini Air.
  • Sad
Reactions: Jimbo
TheRatPatrol
It's now expanded to a Build Your Own Multiview, currently available to streaming customers with Geminis and Roku, and coming soon to Android TV, Fire TV, Vizio, LG, Apple TV and Tizen.
How soon will it be available on Apple TV? Thanks
I WANT MORE
But not on the only device they ship out right now which is the Gemini Air.
It's on my Air's.
b4pjoe
It's on my Air's.
The post read: "currently available to streaming customers with Geminis and Roku, and coming soon to Android TV, Fire TV, Vizio, LG, Apple TV and Tizen". It didn't mention the Air. I suppose when it said Geminis it meant both but I had no way of knowing that.
  • Like
Reactions: dtv757
dtv757
Hopefully soon for fire stick too
SuperDish_Fan23
Last reply · posted in DISH Network Support Forum
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
2 Replies · 69 views
dishdude
They didn't sell many, they were pricey and not out long. Quickly got replaced by the Hopper.
  • Like
Reactions: charlesrshell
T
They were high-end specialty, somewhat buggy and the 612/622/722 just overwhelmed it in popularity.
  • Like
Reactions: charlesrshell
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
19 Replies · 839 views
  • Like
Reactions: LQQK and reubenray
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
R
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
My wife mentioned that her remote is acting strange this morning. She hit FF and it went to 15x FF.
  • Like
Reactions: charlesrshell
Bobby
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
This has been an ongoing issue. A fix is coming, probably in the next software version.
Foxbat
Wife bought me a t-shirt that has "have you tried turning it off and on again?"
Here's the one I need:
1792365258110.webp
dishstaller
Here's the one I need:
Just ordered one....that's great.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5552 Replies · 460666 views
Bobby
Regular$5.999​
Premium$6.399​
Diesel$7.999​
at Costco, Rohnert Park.​
  • Like
Reactions: harshness
harshness
I wonder if California is getting into the Winter formula.
dishstaller
Regular$5.999​
Premium$6.399​
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.
harshness
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.
On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.
  • Like
Reactions: Foxbat
Foxbat
Here in Indiana, the difference between Regular and Premium is usually a dollar, but some charge even more:
1792374072446.webp
  • Like
Reactions: dishstaller
dishstaller
A "full dollar more" sounds like it may be boat gas (non-alcoholic),
Both non-ethanol and prem run about the same....buck more. When we were up in TN it was a buck more up there as well.
jokeworm
Last reply · posted in What's Cooking?
Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...

We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.

Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)

Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"

So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.

So again - I ask you ...

What's for dinner tonight ?

Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.

What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
4332 Replies · 331206 views
TRG
TRG
Beef and vegetable stew with buttermilk biscuits. Water.
It seemed appropriate on an unusually cold and wet evening in New Mexico.
  • Like
Reactions: dfergie
Bobby
Chili Cheesebugers, Tater Tots.
  • Like
Reactions: dfergie and TRG
TRG
TRG
I made shrimp parmesan with spaghetti and a salad.
  • Like
Reactions: dfergie
S
venison lasagna
  • Love
Reactions: Bobby
dishstaller
Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 :cool As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.
  • Like
Reactions: dfergie and Bobby
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
112 Replies · 906 views
navychop
Servant's problem.
  • Like
Reactions: Bobby
meStevo

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
harshness
The EV company to watch out for is SAIC. They seem likely to take over Government Motors at some point.

GM originally struck a JV deal with SAIC to gain access to China. Now SAIC has taken China back with the substantial library of technology GM shared and they're looking to export to Mexico, South America, the Middle East, and Asia-Pacific.
osu1991
  • Like
Reactions: Foxbat and AZ.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 37 views