Social Feed

Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in DISH Network Support Forum
Hard to believe, but it was 11 years ago today that I became a DISH Network subscriber!

I remember the day well, I ordered my equipment online and had it all ready for the installer. The installer showed up and I told him it was a 3 room install, and his face drooped and said he would have to reschedule because he didn't have time to do a 3 room install by himself.

He then asked what kind of equipment I had I told him a 3900, a DISHplayer 7200 and a DISH 6000.

When I told him I had a DISH 6000 he didn't believe me as he never saw one... He then said "oh but for me to hook up the DISH 6000 you need to have a HDTV and nobody has one of those yet..."

I said I did.

He got on his phone and called in two helpers... he wanted to see HDTV for himself as he never saw HD before... the install was on.

In a matter of a few hours we were all hooked up and he was impressed with what he saw.

Me and that installer hit it off and now today we are still very close friends.

That was 11 years ago today.. its been a bumpy road to say the least! I have seen a lot of good and bad from DISH Network over the years... but the think I have loved most about DISH is they are always keeping things interesting... from new state of the art hardware to new programming (and who can forget the programming disputes!)

I didn't realize it has been this long with DISH... but over the weekend one of my 622's died so I contacted Matt from the DISH DIRT team for help and he noticed my start date and let me know.

And since we are celebrating things, it was also 10 years ago today that I helped start another satellite discussion forum, today we celebrate the birth of DBSTalk.COM!

A number of us decided to start our own site when the now defunct DBSforums started prohibiting people from discussing issues with the DISH Network DISHplayer.

For the history of DBSTalk please check out History Of DBSTalk for a complete revisit of this history written by DBSTalk founder Chris Blount.

Here is what the DBSTalk homepage looked like back then.. DBSTalk Home Page

I was with DBSTalk for around two years before going out on my own and starting SatelliteGuys. SatelliteGuys turns 8 this year in September! (SatelliteGuys was born on September 6th, 2003 at 12:19PM ET)

I would like to congradulate Chris and the DBSTalk folks for hitting the 10 year milestone! They have dne a great job over the years especially with their DIRECTV forums.

We have not always seen eye to eye over the years, but in hindsight the bickering made both of our sites better for all of our members. So once again hats off to Chris and the gang at DBSTalk!
51 Replies · 6574 views
Scott Greczkowski
Here are some screen shots of the new born SatelliteGuys.US!

The homepage...
www.SatelliteGuys.US :: Real American Satellite Talk, For Real Satellite Guys!


The main forum index... (Wouldn't it be nice to have that number of forums again?!)
www.SatelliteGuys.US :: Index

Here are our stats...
www.SatelliteGuys.US :: Statistics

And a look at our memberlist... I am amazed and proud many of the folks on this list are still regular members who visit often!
www.SatelliteGuys.US :: Memberlist

How about our first look at the DISH 921 (Anyone remember them?!)
www.SatelliteGuys.US :: View topic - Exclusive: Scott Reviews the Dish Player 921!

Ahh memories!
Frank Jr.
Look how clean everything looked back then. (lol) :rolleyes::D
jerryez
I started out with a Houston Tracker, but moved up to the Chapperal Monterey 95 when it came out. Great receiver with the 95. Had a lot of trouble with the HTS, but still having trouble with Charlie's receivers, but the 722K is working fine,so far.
navychop
Since 12/18/01. We picked Dish because they had a $10/month plan for the first year. Lucked out on that. Started with two 301s. Later got a 721 & 508. Now two ViP722s. Can't imagine not having DVRs or those great ViPs.
KimmiKat
Good ol phpBB! If someone could win the Lotto and pay for the server, etc it could be that clean again!

Look how clean everything looked back then. (lol) :rolleyes::D
Michael S@ DISH NETWORK
Here are some screen shots of the new born SatelliteGuys.US!

The homepage...
www.SatelliteGuys.US :: Real American Satellite Talk, For Real Satellite Guys!


The main forum index... (Wouldn't it be nice to have that number of forums again?!)
www.SatelliteGuys.US :: Index

Here are our stats...
www.SatelliteGuys.US :: Statistics

And a look at our memberlist... I am amazed and proud many of the folks on this list are still regular members who visit often!
www.SatelliteGuys.US :: Memberlist

How about our first look at the DISH 921 (Anyone remember them?!)
www.SatelliteGuys.US :: View topic - Exclusive: Scott Reviews the Dish Player 921!

Ahh memories!

When did you switch from phpBB to vBulletin?
tomcrown1
Scott I know I was wondering if you came from web tv.

It was strange back then hearing from new subscribers to web tv, who have been with dish, telling my team how much better dish customer service is compared to web tv.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5449 Replies · 336091 views
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680237 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 49 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 288 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 52 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 56 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.