yep
I have my motor between the switch and LNB
receiver-----4x1 diseqc
port 1 goes to motor which goes to KU LNB
port 2 goes to fixed dish at 119
port 3 goes to fixed dish at Galaxy 3C
port 4 goes to fixed dish at Galaxy 10
Only problem with my setup is if the motorized is on SBS6 (as an exmaple) and the receiver is on G10. If I go to IA6, I have to go to that channel and do a "channel up, channel down" to get the motor to move
Its goofy....but I got it figured out
