Thought I give any enterprising people out there an bit of how to if they want to try locating any more guide info.
I went from 00001 to 09999 in the code on my maps to locate all the above so anything over 10000 is still not completed.
Here is an example how I did it.
I made several different sets of maps.
Started out from 00001 to 01000
Next one went from 01001 to 02000
Next one went from 02001 to 03000 and so on up to 09999.
Here is what G4 looked like on the 05000 set of maps.
You have to change this set of numbers I put in bold on the maps.
003-G4,00001,0,1,1,0,05001,001,00000,0,80,H,1430000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00002,0,1,1,0,05002,002,00000,0,80,V,1410000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00003,0,1,1,0,05003,003,00000,0,80,H,1390000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00004,0,1,1,0,05004,004,00000,0,80,V,1370000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00005,0,1,1,0,05005,005,00000,0,80,H,1350000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00006,0,1,1,0,05006,006,00000,0,80,V,1330000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00007,0,1,1,0,05007,007,00000,0,80,H,1310000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00008,0,1,1,0,05008,008,00000,0,80,V,1290000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00009,0,1,1,0,05009,009,00000,0,80,H,1270000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00010,0,1,1,0,05010,010,00000,0,80,V,1250000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00011,0,1,1,0,05011,011,00000,0,80,H,1230000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00012,0,1,1,0,05012,012,00000,0,80,V,1210000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00013,0,1,1,0,05013,013,00000,0,80,H,1190000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00014,0,1,1,0,05014,014,00000,0,80,V,1170000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00015,0,1,1,0,05015,015,00000,0,80,H,1150000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00016,0,1,1,0,05016,016,00000,0,80,V,1130000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00017,0,1,1,0,05017,017,00000,0,80,H,1110000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00018,0,1,1,0,05018,018,00000,0,80,V,1090000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00019,0,1,1,0,05019,019,00000,0,80,H,1070000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00020,0,1,1,0,05020,020,00000,0,80,V,1050000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00021,0,1,1,0,05021,021,00000,0,80,H,1030000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00022,0,1,1,0,05022,022,00000,0,80,V,1010000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00023,0,1,1,0,05023,023,00000,0,80,H,0990000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00024,0,1,1,0,05024,024,00000,0,80,V,0970000,0,1,1,0,1,6.20,6.80,NTSC,10,003
003-G4,00955,0,1,1,0,05026,045,00000,1,80,H,1150000,0,1,0,0,1,6.48,7.30,NTSC,10,003
003-G4,00956,0,1,1,0,05027,046,00000,1,80,H,1150000,0,1,0,0,0,7.43,7.43,NTSC,10,003
003-G4,00958,0,1,1,0,05028,048,00000,1,80,H,1150000,0,1,0,0,0,7.62,7.62,NTSC,10,003
003-G4,00960,0,1,1,0,05029,050,00000,1,80,H,1150000,0,1,0,0,0,7.82,7.82,NTSC,10,003
;
So you can see the type of work involved to get this far.
Once done you build a new bin and send it to your receiver and (you must have the guide bit turned on), wait for any guide info to load and see what you have.
Then you see guide info appear on say G4/03 you look in the text file to see what numbers you had in G4-03 and write them down and what the guide showed as info./program.
since everything under 09999 was already done you would want to start at:
10000 and go up.