Social Feed

R
RPB
Last reply · posted in FTA Receiver / Equipment Support
You had asked me to send you the udf file from when my continual reboot cycle was going on

Ok, I ordered the USB recovery cable, removed cover, plugged it in installed the driver and ali editor,
downloaded the 8-28 .udf file from first post in this thread unzipped it too
restarted computer plugged in usb cable ... Found new Hardware, ... ready to use ...

In Alieditor, when I click File open, there's nothing, when I navigate to the unzipped userdb folder I unzipped I see a file I can open

Clicking "Process" either upload or download gets a

"Cannot open Port" error
Am I supposed to go into Computer's BIOS and enable serial COM ports or something not generally needed for USB? I disabled Parallel Printer ports and all that unused stuff in order to use those resources elsewhere when I installed Windows. Or perhaps registry edit to LASTDRIVE= to allow more drives than drive P or something? That may cause conflicts with other hardware I have installed. I expected the MicroHD to just show up as another removeable drive like Majic Jack/thumb drives do that I could navigate to etc

It's neat looking at the udf file I downloaded from here in the AliEditor, but I can't upload the old UDF to send to you nor download one, and I'm not positive if the DC power adapter should be plugged into the MicroHD while I'm doing this or not ... meanwhile, I'm watching the light on the MicroHD which is plugged into the USB port on computer and DC power continually do the red light green light reboot cycle show.

LOL I wanted to watch a TV show which is on a Satellite, I end up buying lumber, rebar, pouring concrete and learning math to figure declination/elevation/azimuth ... and re-learning electronic stuff I had forgotten in the 1970s. ;)

Some day. I'll ride in my kayak I bought in 2009 for $3,000 so I can catch a fish.... haven't had time yet, too many "hobbies" goin' on at once.

How do I get communication between my MicroHD and this computer so a udf file can be E-mailed to you or uploaded? (My other MicroHD works fine ... glad I got two)
10 Replies · 6158 views
primestar31
Com1 and Com2 in Windows are usually reserved. When you load a driver that configures a com port in Windows, usually by default it auto-picks the next available one: IE: Com3. If even that's reserved, it'll pick Com4 and so on.

Hook the cable up to your pc, then just go into Device Manager, click on "Ports (COM & LPT)" and it'll show your ports, and which one is configured for the TTL cable.

Personally, I use a laptop with stuff like this to be safe. If you lose power while doing this with a desktop that's not on a UPS, it's bad. If you lose power while using a laptop, the battery power will save your bacon! NEVER, EVER flash firmware if there's even the slightest chance you could lose power during it!
R
RPB
I installed the driver, it found the hardware each time, said ready for use.

go into Device Manager, click on "Ports (COM & LPT)" and it'll show your ports, and which one is configured for the TTL cable.
Thanks

it shows it as com 5

ok so I changed the software aliediter to use com5 ... that's the step I needed, ...forgot to look in Device Manager.

it Tested port, OK, now seems to be uploading from wherever to a folder I made om the desktop, I named it stbs.udf

Thanks for patience... I used to know this stuff, even worked at MSN/Microsoft a while as they outsourced stuff I handled Security for their Celeb chat servers and stuff... have a couple small strokes and get old and the memory goes to heck.

NEVER, EVER
flash firmware if there's even the slightest chance you could lose power during it!

that I do remember ... I have this bunch of electronics on a 2,500VA AVR Sine wave Uninterpretable Power Supply (rack mounted).

Back when I did MSN security, one night I had half a neighborhood outside my window shining flashlights in my house wondering why light came from my windows ( the neighborhood had a power failure, I didn't know ... my 5 monitors closest to the Window made the neighbors think only my house had electricity... I had enough UPS boxes/batteries to last 8 to 10 hours easily, that's the longest I had to run them once in a storm before we got power back)

==============

Ok, there's a file saved 100% called stbs.udf in my New Folder, so I'll E-mail it to you like you had asked, and I'll download to the MicroHD the new one user, userdb.udf I got from here.
..............................................

Ok, it worked, both my MicroHDs are working great now.

I'll upload my files from my other one with all my searches done and Favorites categorized and put it on the resurrected one to save time searching and organizing again .
S
Hi guys,
What sort of functions should I see from the microHD when I'm plugged into it with the TTL cable? I plugged mine in the "right" way and nothing happened so I swapped the TX/RX and I get the green light to turn red a couple times but still no go. Any ideas what I need to do? My connections are good, I soldered them on to the nubs either way. In control panel the Comm port is set to 9600, not sure what it needs to be. I'm not sure if it matters but I got a 3-pin TLL cable so I had to chop a 2nd USB cable in half and solder the red wire from that one to the microHD 5 Volt pin and use the TTL for the other 3. :behindsofa:
Cheers, Steve
SatelliteAV
What sort of functions should I see from the microHD when I'm plugged into it with the TTL cable? I plugged mine in the "right" way and nothing happened so I swapped the TX/RX and I get the green light to turn red a couple times but still no go. Any ideas what I need to do? My connections are good, I soldered them on to the nubs either way. In control panel the Comm port is set to 9600, not sure what it needs to be.
Cheers, Steve

Please review the sticky thread on USB/TTL process.
http://www.satelliteguys.us/threads/291053-First-Aid-Serial-Update-via-Internal-TTL-Header

The speed selection is definitely wrong.
S
I think I was able to sort things out in the end, I downloaded some different drivers and made communication. In the end I just used the power supply with the microHD to power the unit rather than try to use the 2nd USB cord for power. The 2nd cord probably would have worked instead of the power supply or proper 4-wire cable, I'm 99% sure I was having driver issues and that the 3-wire cable will suffice.
Steve
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68540 Replies · 2673781 views
  • Like
Reactions: c-spand
dishstaller
Little Wing - Jimi Hendrix
  • Like
Reactions: ClarkGable
long_time_Dish
With A Little Luck - Wings
  • Like
Reactions: ClarkGable
H
LITTLE Willy-Sweet
  • Like
Reactions: ClarkGable
ClarkGable
Little Deuce Coupe - The Beach Boys
  • Like
Reactions: gms49ers
gms49ers
The Boys of Summer - Don Henley
T
Last reply · posted in DISH Network Support Forum
I thought I would come here and find lots of complaints about the update to the dish anywhere mobile app, but am not seeing any. It used to look just like the desktop webpage. Now you can no longer filter by sports channels or movie channels. Plus that they made it look like a big button telephone and you see fewer channels in the screen which requires more scrolling. Yes I realize you can look at sports then select which sport you want to look at, I just liked being able to see all sporting events in the guide with all other channels being filtered out. Am I alone in the wilderness on this?
8 Replies · 270 views
  • Like
Reactions: dishstaller
dishdude
I like the new look, it's a lot cleaner. I'm using it on one of those Onn streaming devices when I travel.
  • Like
Reactions: charlesrshell
T
I like the new look, it's a lot cleaner. I'm using it on one of those Onn streaming devices when I travel.
Yes a lot cleaner, glossier, and less functional. Someone trying to justify why they are making a big salary. "See look shiny"
  • Like
Reactions: charlesrshell
navychop
"Big salary." Charlie. "?Big?"
Tampa8
Seems in some ways better. Nicer layout, as others said maybe cleaner. Moving ahead in the guide is better.
S
I thought I would come here and find lots of complaints about the update to the dish anywhere mobile app, but am not seeing any. It used to look just like the desktop webpage. Now you can no longer filter by sports channels or movie channels. Plus that they made it look like a big button telephone and you see fewer channels in the screen which requires more scrolling. Yes I realize you can look at sports then select which sport you want to look at, I just liked being able to see all sporting events in the guide with all other channels being filtered out. Am I alone in the wilderness on this?
I think most are using it on a firestick or other device as an extra receiver, rather than their phone. Just a guess based on how I use it. 99% thru my firestick, 1% phone.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Stargate SG-1 cancelled, Atlantis renewed
clear.gif

Monday - August 21, 2006 | by Darren Sumner
clear.gif

The future of Stargate is in question today, as SCI FI Channel has cancelled the long-running Stargate SG-1, Multichannel News reported today and a GateWorld source has confirmed. The news regrettably follows the airing of the show's milestone two-hundredth episode on Friday.

Stargate Atlantis, meanwhile, has been renewed for a fourth season, with the network hoping to see that the spin-off series can stand alone, according to a source.
Source Gateworld
2034 Replies · 184178 views
R
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
osu1991
long_time_Dish
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
R
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
long_time_Dish
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
If I understand your question, O'Neill had the Ancient's knowledge in the "Lost City" two-part episode. That was when Anubis attacked Earth and there was a big battle over Antarctica.
  • Like
Reactions: dfergie and Foxbat
R
If I understand your question, O'Neill had the Ancient's knowledge in the "Lost City" two-part episode. That was when Anubis attacked Earth and there was a big battle over Antarctica.
Those are the episodes I am looking for. They are referred to a lot in the episodes I just recently watched.
  • Like
Reactions: dfergie
T
Last reply · posted in Free To Air (FTA) Discussion
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
6 Replies · 292 views
B
would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow
  • Like
Reactions: TVHabit
O
If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.
  • Like
Reactions: TVHabit
T
I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...
Titanium
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
LNBF mount.webp
  • Like
Reactions: FTA4PA
k4otl
To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit :) )
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
116 Replies · 1854 views
  • Like
Reactions: Jimbo and dfergie
Foxbat
I guess even the patience of us laid-back Hoosiers has its limits:
rvvaquero
I guess even the patience of us laid-back Hoosiers has its limits:
Be nice to see a Cowboy headline like that.
M
I guess even the patience of us laid-back Hoosiers has its limits:

Can we expect to see a new coach if we say "pretty please?"
  • Like
Reactions: Foxbat
Foxbat
Jeeez, Week 6, no lead is safe…
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
24 Replies · 1113 views
  • Like
Reactions: LQQK and reubenray
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
jsmit86
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
long_time_Dish
They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
Oh, you mean "soon"? :biggrin
Almighty1
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
I guess they will be busy when lots of people start asking for rollbacks to H708 now that you mention that downgrades of software does exist because it will likely fix the OTA Single Tuner and the IR Remote problems in H710-H713.
navychop
it will likely fix the OTA Single Tuner

:popcorn
  • Like
Reactions: charlesrshell
dishstaller
it will likely fix the OTA Single Tuner
🤣

Oh....you were serious
  • Like
Reactions: charlesrshell
teachsac
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Hondo is back with a new squad 9/25 only on Starz.


View: https://m.youtube.com/shorts/b0gPzA8KHEQ
7 Replies · 123 views
  • Like
Reactions: dfergie
K
Never watched the previous shows, so doubtful.
teachsac
Started watching yesterday. Not too bad.
Scott Greczkowski
Wife likes it.
  • Like
Reactions: teachsac
teachsac
I like Zyra from La Brea (one with the prosthetic).