Social Feed

B
Last reply · posted in DIRECTV General Forum
Im trying to hook up to a new dish (in a barn away from the house hence I got a hold of a separate dish for the barn). I have it pointed and used a meter (purchased on line) and am getting a pretty good signal according to the meter at the dish. When I go in the house it comes up as across the board 0's on all Sat's and all transponders. While it seems possible that I may not have a strong enough signal to get a picture i think i am at least close enough to not have complete 0's. I'm thinking's I may have something more basic wrong. Perhaps i have the setting on the box for dish type wrong?? Any other suggestions?? How do I know which Dish type and switch type I have? The LNB is a single "eyeball" that has 3 bumps on it. The dish is oval shapped and says slimline on it. I assume Slimline 3 of some kind? Any suggestions?
10 Replies · 1698 views
B
Fantastic thanks to both of you! In answer to your questions
A.) i did point at the azth. and Elev. and tilt suggested in the box menu and on the DTV website
B.) My dish on the house has 1 cable coming out, the one on the barn has 4 so I assume "regular type" for the barn?
C.) My meter is just a cheapy (bought for this one time, do it myself, tinkering, experiment) called a SF-95DR
D.) For alignment i started with the course coordinates and tweaked until i got a peak, then dial the fine adjuster 2 turns off peak then back to the same reading and split the difference. There was a name for this process but it escapes me now "dither"?.


I have a couple other questions / confirmations
1.) I don't need the power inserter? I was using one, to power the meter if nothing else.
2.) I sould select a dish type "03 Slimline-3" with out any additional modifiers such as "&72.5"
3.) Switch type should be multi? the menu doesn't seem to be letting me select that, it seems to be defaulted to SWM
4.)I didn't have a BBC, my house sat didn't need one, I assume I just install this as the last component into the box?
5.) My box is saying "do not install B converter" ??? The box is an "H-25" if that helps?
6.) Even with out the BBC wouldn't i at least register something on one of the ku satellites?

Thanks again for the help!!
Hutch1814
Fantastic thanks to both of you! In answer to your questions
A.) i did point at the azth. and Elev. and tilt suggested in the box menu and on the DTV website
B.) My dish on the house has 1 cable coming out, the one on the barn has 4 so I assume "regular type" for the barn?
C.) My meter is just a cheapy (bought for this one time, do it myself, tinkering, experiment) called a SF-95DR
D.) For alignment i started with the course coordinates and tweaked until i got a peak, then dial the fine adjuster 2 turns off peak then back to the same reading and split the difference. There was a name for this process but it escapes me now "dither"?.

I have a couple other questions / confirmations
1.) I don't need the power inserter? I was using one, to power the meter if nothing else.
2.) I sould select a dish type "03 Slimline-3" with out any additional modifiers such as "&72.5"
3.) Switch type should be multi? the menu doesn't seem to be letting me select that, it seems to be defaulted to SWM
4.)I didn’t have a BBC, my house sat didn’t need one, I assume I just install this as the last component into the box?
5.) My box is saying "do not install B converter" ??? The box is an “H-25” if that helps?
6.) Even with out the BBC wouldn't i at least register something on one of the ku satellites?

Thanks again for the help!!

The H25 is SWM only. The dish on the house is SWM. You'll need a SWM LNB and power inserter if you plan on using the H25. I didn't read the entire post, looked like the people helping you are on track if I read it correctly.
Jimbo
Fantastic thanks to both of you! In answer to your questions
A.) i did point at the azth. and Elev. and tilt suggested in the box menu and on the DTV website
B.) My dish on the house has 1 cable coming out, the one on the barn has 4 so I assume "regular type" for the barn?
C.) My meter is just a cheapy (bought for this one time, do it myself, tinkering, experiment) called a SF-95DR
D.) For alignment i started with the course coordinates and tweaked until i got a peak, then dial the fine adjuster 2 turns off peak then back to the same reading and split the difference. There was a name for this process but it escapes me now "dither"?.


I have a couple other questions / confirmations
1.) I don't need the power inserter? I was using one, to power the meter if nothing else.
2.) I sould select a dish type "03 Slimline-3" with out any additional modifiers such as "&72.5"
3.) Switch type should be multi? the menu doesn't seem to be letting me select that, it seems to be defaulted to SWM
4.)I didn't have a BBC, my house sat didn't need one, I assume I just install this as the last component into the box?
5.) My box is saying "do not install B converter" ??? The box is an "H-25" if that helps?
6.) Even with out the BBC wouldn't i at least register something on one of the ku satellites?

Thanks again for the help!!

Yup, as Hutch mentioned, the H25 is SWM only, the LNB you have at the barn is Non SWM.
With the LNB you currently have at the barn, you would not need a BBC or a Power Inserter.

What other recvrs do you have ?
Maybe you can use a different recvr in the barn that you already have.

IF you end up using the H25 out there you will need a Power Inserter (21 volt)
B
I have an HR24 as well, but thats the main DVR in the house, i would be reluctant to do that. But if i did would it work? If not, what if i just bought aSWM 3 LNB, could i just put that at the end of the mast instead and keep the actual dish hardware I have set up? Does this H2[FONT=Trebuchet, Trebuchet MS]5 non SWM LNB thing explain why i'm getting all 0's at the tv box? [/FONT]
Jimbo
I have an HR24 as well, but thats the main DVR in the house, i would be reluctant to do that. But if i did would it work? If not, what if i just bought aSWM 3 LNB, could i just put that at the end of the mast instead and keep the actual dish hardware I have set up? Does this H2[FONT=Trebuchet, Trebuchet MS]5 non SWM LNB thing explain why i'm getting all 0's at the tv box? [/FONT]

If your set up at the barn with out the Power Inserter and using the H25, YES it will show zero on the screen because the SWM technology needs the addl. power to run it.

IF you were to take the HR24 out to the barn and hook it up to the Non SWM set up and Re ran the Sat Set Up, it would work.
However, seeing thats your main recvr, if you wanted to use it to make sure your pointed at the right spot, you could do that.

Also, if you rplcd the LNB at the barn with a SWM set up and added a PI it too would work with the H25.
B
You are probably closer than you think. It appears that you have been able to do a reasonable job of setting up the dish with the conventional LNB. (It would be nice to confirm that with another receiver from the house, but a number of them don't like changing from SWM to non-SWM, so that option would probably be more trouble than it is worth.)

Now, you can get a SWM LNB (including power inserter and splitter) for around $30 on ebay. Simply swap out the LNB head with the new SWM LNB head and be good to go. You cannot use that cheap meter you bought to do any alignment or "tweaking" of the SWM signal. But, you should be fairly good with your current settings.

You may have to readjust things a bit on the tilt, but you can use the meter in the receiver for that.
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6630 Replies · 379369 views
TRG
TRG
Bacon, eggs, hash browns and toast. Coffee.
  • Like
Reactions: Mr Tony and dfergie
TRG
TRG
Wound up at the Waffle House this morning. Got the two egg breakfast with coffee.

1622.webp
  • Like
Reactions: dfergie and Mr Tony
dfergie
Speaking of waffles, I'm going to put my mini waffle iron on stove so I'll remember to make waffles in the morning... Had some last week, been awhile.
dfergie
Dos cackleberrys over easy on top of 2 corned beef hash patties fried in skillet... Chocolate milk.
  • Like
  • Love
Reactions: TRG and Bobby
TRG
TRG
Cold morning today, only 32 degrees. Fired up the oven and made cinnamon rolls (from a tube) and a pot of coffee.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68511 Replies · 2671580 views
  • Like
Reactions: c-spand
ClarkGable
Five O'Clock World - The Vogues
  • Like
Reactions: sdfntx
FTA4PA
Six O'Clock News - John Prine
  • Like
Reactions: sdfntx
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
sdfntx
Somewhere in Time - John Barry
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
119 Replies · 3229 views
  • Like
Reactions: osu1991
Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
​
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Foxbat
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
IMG_1535.webp
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5390 Replies · 510344 views
osu1991

View: https://youtu.be/9j3vxhzM8MY?is=Rs1cY1FQAiRWi87i


Come September (1961)
Rock Hudson and Gina Lollobrigida with Sandra Dee and Bobby Darin
  • Like
Reactions: dfergie
Y
1791758462355.webp


Simple, charming. Entire premise is quite silly but Cary Grant carries it across the line in good fashion.
T
Last: The Social Reckoning. Spoiler alert, they make Zuck look like a...
Foxbat
Since it was already "paid" for, I spent the two hours of my time watching the John Cena action movie on Apple TV, "Matchbox The Movie" even though the reviews were brutal. It was better than I expected, so I didn't feel like I had wasted an afternoon watching it. But it felt like another "Reacher"/"Neghley"/"Mission: Impossible"/"Fast & Furious" crash and blow stuff up with lots of automatic gunfire mixed in movie featuring covert CIA operatives.

I don't think we'll get a follow-up movie from this. I expect Mattel will have other toy lines to exploit.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
38 Replies · 3562 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
dfergie
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
  • Like
Reactions: navychop
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
amazon maybe :what
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
S
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
id'e rather make my own vs store bought.
  • Like
Reactions: dfergie
R
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
Especially when I can get a two pound roll of Jimmy Dean from Sam's Club for $7.38.
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2134 Replies · 214759 views
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
  • Like
Reactions: Howard Simmons
dfergie
I liked this episode and a toned down Tony...
  • Like
Reactions: Jimbo
Howard Simmons
Would you rather have LaRoche ???
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
Jimbo
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
I don't think Tim and Tony are that far apart in Age ...

Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)

Tony has changed, he's been running his Security Business ... I'm sure he has grown up.

Give it time ... your judging the New Tony from the old Tony.

It sounds like Tim won't be around the Team much longer either.
KAB
KAB
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
  • Like
Reactions: reubenray
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...