Social Feed

dont24
Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
I understand I'd have to purchase a 3rd Hopper at full price. Looks like Dish Depot is the best option. I'll assume I'd need to contact Dish, get a quote for a 2H/3J setup and mention I'll need the 3rd Hopper setup during the tech visit? Also not sure if I need to purchase any additional hardware, besides the 3rd Hopper.


** Can one of the Admins move this to the Hopper Zone? Thanks **
18 Replies · 2893 views
D
Also, if I'm not mistaken, weren't the DPP33's stopped being made some time ago??? I ended up buying a new one off E-bay a few months ago...
agentc13
Also, if I'm not mistaken, weren't the DPP33's stopped being made some time ago??? I ended up buying a new one off E-bay a few months ago...

In house techs carry one 33 switch and one 44 switch. At least in my area (but I think it's the same everywhere).

The 33 switches we carry are DP33, not DPP.

Maybe you were thinking DPP34 (which is basically the DP33, but DPP tech instead of DP) ?
Dishman1978
In house techs carry one 33 switch and one 44 switch. At least in my area (but I think it's the same everywhere).

The 33 switches we carry are DP33, not DPP.

Maybe you were thinking DPP34 (which is basically the DP33, but DPP tech instead of DP) ?

Dude....you better go look at your inventory. 1 Dpp 44 switch and one DP 34 switch is what is on our inventory lists.

DP is Dish Pro (needs 2 lines for dual tuners, will not work with a node).

DPP is Dish Pro Plus (only 1 line for dual tuners)

Unless you are very lucky you are not carrying a DPP33 switch its a DP34.

There's no such thing as a DP33.
Bodo Fenrirsson
I would think that the best thing to do is if you can afford to buy a third Hopper,then just go ahead & buy the extra 2 DPP44's that you'll need for the installation,& (after you make sure that it is notated that you'll have 3 Hoppers installed & you'll have the 3rd Hopper available along with the extra 2 DPP44's) when the installer calls to let you know that he is on the way,confirm with him the fact of your special installation so that he knows,before he drives up to your place,that that is what he is going to do.
D
I would think that the best thing to do is if you can afford to buy a third Hopper,then just go ahead & buy the extra 2 DPP44's that you'll need for the installation

- I did NOT have the 3rd Ho here when the techs arrived - & I was NOT even sure I'd have it in time to beat the (monthly) price increase (I did actually...)
- Why WOULD I need to buy TWO DPP44's, when the tech already installed one? (I also was using a 211k)
- I ALREADY had the DPP33 on hand; I had bought it a couple months ago dirt cheap, for another project, but ended up not needing it for that - it worked up just fine for this
- Just because someone "can afford to buy a Ho", doesn't mean that same person spends $$$ on unnecessary equipment (hint: that's why I CAN afford to buy a Ho...)

Geeze guys, what DO you have against the DPP33's; it works just fine, costs about 1/2 of the DPP44 & I do NOT have to keep more dish switches on the UPS - as I just told you above! :confused:
Is there some sort of problem with these switches? (other than E* NOT making them anymore) I actually used the diagram that someone posted here for 3 Ho's, which was easy-peasy.
I GUARANTEE you I will NOT be getting any more Ho's, so there is NO need for additional receiver ports.
agentc13
Dude....you better go look at your inventory. 1 Dpp 44 switch and one DP 34 switch is what is on our inventory lists.
Yes, I had a brain fart and reversed the 33 and 34. My bad. :( Let me blame it on the long day.
DP is Dish Pro (needs 2 lines for dual tuners, will not work with a node).

DPP is Dish Pro Plus (only 1 line for dual tuners)

That is what I was trying to point out, that in house techs only have the 44 as an option because the other switch is DP.
Unless you are very lucky you are not carrying a DPP33 switch its a DP34.

There's no such thing as a DP33.
Yep, see above. I confused the numbers, thanks for correcting that.
Bodo Fenrirsson
- I did NOT have the 3rd Ho here when the techs arrived - & I was NOT even sure I'd have it in time to beat the (monthly) price increase (I did actually...)
- Why WOULD I need to buy TWO DPP44's, when the tech already installed one? (I also was using a 211k)
- I ALREADY had the DPP33 on hand; I had bought it a couple months ago dirt cheap, for another project, but ended up not needing it for that - it worked up just fine for this
- Just because someone "can afford to buy a Ho", doesn't mean that same person spends $$$ on unnecessary equipment (hint: that's why I CAN afford to buy a Ho...)

Geeze guys, what DO you have against the DPP33's; it works just fine, costs about 1/2 of the DPP44 & I do NOT have to keep more dish switches on the UPS - as I just told you above! :confused:
Is there some sort of problem with these switches? (other than E* NOT making them anymore) I actually used the diagram that someone posted here for 3 Ho's, which was easy-peasy.
I GUARANTEE you I will NOT be getting any more Ho's, so there is NO need for additional receiver ports.

I meant that statement to the OP,that it would save time to have everything in advance(3rd Hopper & DPP44) & to make sure to confirm when the installer calls that he understands what he is going to do at the OP's home.

Also,like you said,the DPP33 is not being made anymore & not everybody has access to one. If you can't get ahold of a DPP33,then yes at least buy one extra DPP44 to make it easier for the installer. If & when I ever upgrade from my 2 ViP722k's & 1 ViP211k,I'll most likely buy my Hoppers & Joeys in advance instead of depending on Dish for everything,but that's just me.
D
Also,like you said,the DPP33 is not being made anymore & not everybody has access to one. If you can't get ahold of a DPP33,then yes at least buy one extra DPP44 to make it easier for the installer.

Agree
Dishman1978
- I did NOT have the 3rd Ho here when the techs arrived - & I was NOT even sure I'd have it in time to beat the (monthly) price increase (I did actually...)
- Why WOULD I need to buy TWO DPP44's, when the tech already installed one? (I also was using a 211k)
- I ALREADY had the DPP33 on hand; I had bought it a couple months ago dirt cheap, for another project, but ended up not needing it for that - it worked up just fine for this
- Just because someone "can afford to buy a Ho", doesn't mean that same person spends $$$ on unnecessary equipment (hint: that's why I CAN afford to buy a Ho...)

Geeze guys, what DO you have against the DPP33's; it works just fine, costs about 1/2 of the DPP44 & I do NOT have to keep more dish switches on the UPS - as I just told you above! :confused:
Is there some sort of problem with these switches? (other than E* NOT making them anymore) I actually used the diagram that someone posted here for 3 Ho's, which was easy-peasy.
I GUARANTEE you I will NOT be getting any more Ho's, so there is NO need for additional receiver ports.

There is nothing wrong with the 33. Infract all the guys in my office were stoked when we got em. But then somebody invented the dpp500+ effectively making the 33 obsolete. No more need for its intended purpose.
Dishman1978
Yes, I had a brain fart and reversed the 33 and 34. My bad. :( Let me blame it on the long day.

That is what I was trying to point out, that in house techs only have the 44 as an option because the other switch is DP.
Yep, see above. I confused the numbers, thanks for correcting that.

Rockstar can cure brainfarts...too bad it decreases the amount of fluid a bladder can hold...or so it seems.
3HaloODST
There is nothing wrong with the 33. Infract all the guys in my office were stoked when we got em. But then somebody invented the dpp500+ effectively making the 33 obsolete. No more need for its intended purpose.

My DPP33 works great with my Hopper setup. Costed about half as much as the DPP44 and saved having to plug in another power inserter.

Sent from my iPhone 4S using Forum Runner
T
Last reply · posted in Free To Air (FTA) Discussion
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
6 Replies · 284 views
B
would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow
  • Like
Reactions: TVHabit
O
If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.
  • Like
Reactions: TVHabit
T
I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...
Titanium
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
LNBF mount.webp
  • Like
Reactions: FTA4PA
k4otl
To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit :) )
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68539 Replies · 2673738 views
  • Like
Reactions: c-spand
long_time_Dish
Give A Little Bit - Supertramp
dishstaller
Little Wing - Jimi Hendrix
  • Like
Reactions: ClarkGable
long_time_Dish
With A Little Luck - Wings
  • Like
Reactions: ClarkGable
H
LITTLE Willy-Sweet
  • Like
Reactions: ClarkGable
ClarkGable
Little Deuce Coupe - The Beach Boys
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
116 Replies · 1842 views
  • Like
Reactions: Jimbo and dfergie
Foxbat
I guess even the patience of us laid-back Hoosiers has its limits:
rvvaquero
I guess even the patience of us laid-back Hoosiers has its limits:
Be nice to see a Cowboy headline like that.
M
I guess even the patience of us laid-back Hoosiers has its limits:

Can we expect to see a new coach if we say "pretty please?"
  • Like
Reactions: Foxbat
Foxbat
Jeeez, Week 6, no lead is safe…
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
24 Replies · 1098 views
  • Like
Reactions: LQQK and reubenray
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
jsmit86
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
long_time_Dish
They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
Oh, you mean "soon"? :biggrin
Almighty1
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
I guess they will be busy when lots of people start asking for rollbacks to H708 now that you mention that downgrades of software does exist because it will likely fix the OTA Single Tuner and the IR Remote problems in H710-H713.
navychop
it will likely fix the OTA Single Tuner

:popcorn
  • Like
Reactions: charlesrshell
dishstaller
it will likely fix the OTA Single Tuner
🤣

Oh....you were serious
  • Like
Reactions: charlesrshell
teachsac
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Hondo is back with a new squad 9/25 only on Starz.


View: https://m.youtube.com/shorts/b0gPzA8KHEQ
7 Replies · 116 views
  • Like
Reactions: dfergie
K
Never watched the previous shows, so doubtful.
teachsac
Started watching yesterday. Not too bad.
Scott Greczkowski
Wife likes it.
  • Like
Reactions: teachsac
teachsac
I like Zyra from La Brea (one with the prosthetic).
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Stargate SG-1 cancelled, Atlantis renewed
clear.gif

Monday - August 21, 2006 | by Darren Sumner
clear.gif

The future of Stargate is in question today, as SCI FI Channel has cancelled the long-running Stargate SG-1, Multichannel News reported today and a GateWorld source has confirmed. The news regrettably follows the airing of the show's milestone two-hundredth episode on Friday.

Stargate Atlantis, meanwhile, has been renewed for a fourth season, with the network hoping to see that the spin-off series can stand alone, according to a source.
Source Gateworld
2033 Replies · 184161 views
R
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
osu1991
long_time_Dish
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
R
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
long_time_Dish
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
If I understand your question, O'Neill had the Ancient's knowledge in the "Lost City" two-part episode. That was when Anubis attacked Earth and there was a big battle over Antarctica.
  • Like
Reactions: Foxbat
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
152 Replies · 1945 views
  • Haha
Reactions: Mike0616
Foxbat
Best fan sign I saw during the ND-BYU game: "Bear ate your Lucky Charms!" (Bear being the Cougars' QB). I was going to suggest, "Have you or your team been involved in a Carr crash?"
  • Haha
Reactions: Jimbo and Mike0616
M


They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
  • Like
Reactions: Howard Simmons
Jimbo
They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
Yup, I agree, I'd rather be 2 or 3 till the last few weeks.
  • Like
Reactions: Mike0616