Social Feed

(((Garyd)))
Lifetime Supporter
Last reply · posted in What's Cooking?
I couldn't find a place to put anything about fighting an invasive species growing, and taking over your place, so i hope no one will get mad at me if i post my experience of fighting BAMBOO I PLANTED ABOUT 12 YEARS AGO if i posted it in the wrong area, I'm very sorry, and please tell me where to do it, if that's possible

It wasn't really growing much, it never really got bigger than an area the size of a large pickup truck, my neighbor in the back of me who has not let me cut the trees on the line ever since I tried, when i needed to see the satellites, had finally said you know Gary i was wrong all those years i shouldn't have stopped you from cutting those trees. He even wanted some money now out of me, damn it.

Well, he brought in a crew and cut about enough trees to make 50 cord of wood, then i decided, hey, I would like to have my garden grow again so i cut about 60 cords of trees from my place and i gave both his and mine away for free firewood

The next year my bamboo grew in an area the size of about 200 x 200 feet, it's even under my workshop, the roots broke off, still hoping to figure out to rip them out, I had to get a bobcat E50 that my buddy AL had come and rip it all out, its frozen in a pile but still alive, and i take it to the dump to be burned every few days got so much of it

A TON OF BABY SMALL ROOTS BROKE OFF, DOES ANY ONE HERE KNOW IF THEY WILL DIE FROM THE COLD OR IS THE PLANT FROM HELL GOING TO GROW BACK

There was a lady at my place who pushed our state of CT. to make planting of running bamboo illegal, she saw my bamboo, and i took some videos and she's been putting them on YouTube for anyone to see, so people would wake up and kill it before its takes over your place, it is trying to destroy my fancy stone wall, my house, my yard, I swear its not from the planet earth

https://www.youtube.com/watch?v=eUZ6TMYZBCg

Gary Diamond
59 Replies · 9450 views
harshness
As navychop suggests, one should only plant domesticated "clumping bamboo" but that's water under the bridge. Glyphosate is the only real solution that won't take decades to accomplish, but its use near aquifers isn't to be taken lightly.

Native bamboo is strictly a forestation alternative.
dishstaller
As @navychop suggests, one should only plant domesticated "clumping bamboo"
That must be what a customer had at his place who I did some work for last week. Big clump of bamboo and I asked him if he had trouble controlling it and he said no....he just put a barrier around it and it stays inside it.
  • Love
Reactions: navychop
(((Garyd)))
That must be what a customer had at his place who I did some work for last week. Big clump of bamboo and I asked him if he had trouble controlling it and he said no....he just put a barrier around it and it stays inside it.
Even that one sucks and hard to tell which is which for 5 years I won my battle Andy this is me fighting it.
View: https://youtu.be/EyVBkG6mWns?si=jtkneXjwXBtqS8lH
(((Garyd)))
As navychop suggests, one should only plant domesticated "clumping bamboo" but that's water under the bridge. Glyphosate is the only real solution that won't take decades to accomplish, but its use near aquifers isn't to be taken lightly.

Native bamboo is strictly a forestation alternative.
If you use well water, you will poison your well water.

I have a well and no city water where I live.

Look how bad it is: at high noon, I cut down about 10 shoots that were 18 inches high; at that point, they're very soft—whack, down they go.

The next day, I went out at high noon and they had regrown to 18 inches. If I had not seen the dead ones, I would have thought I was crazy; this was in the middle of June.

Next, I took a shovel and tried to dig one out—zero luck, it was all roots.

Next, I got my pressure washer out and pressure-washed about 3–5 plants, and then I saw my nightmare: all the plant roots were connected like a chain-link fence lying on the ground.

I called my old buddy up: "Please help me rip them all out." He did. It started with 3 plants; at that point, it was now 300 plants over a 250x250 area. It got under huge rocks, under my stone wall, and broke my sidewalk. He only charged me for his gas to run the backhoe. I say it's the only way; late Nov. is best. Freeze the baby roots.
  • Like
Reactions: navychop
navychop
She was right. You shouldn't be doing that. Not even way back when, when rocks were soft and you entered High School. ;)

Now, how much of your being all stove up today canya attribute to the Devil's Weed?
long_time_Dish
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Well, I still have H711 on my Hopper 3, but some reported receiving H712. Please feel free to continue discussing the IR remote issues with your Hopper 3 and whatever issues you are having with H712.
3 Replies · 38 views
  • Like
Reactions: GRB1959
BatStang2000
Well, I still have H711 on my Hopper 3, but some reported receiving H712. Please feel free to continue discussing the IR remote issues with your Hopper 3 and whatever issues you are having with H712.
Just a PSA to anyone who wants to install it manually. My update took about 30 minutes from the time I clicked Update until it was completed. I think it rebooted at least twice during the install. Seems it took longer than the last update. I haven't noticed any changes yet.
GRB1959
Just a PSA to anyone who wants to install it manually. My update took about 30 minutes from the time I clicked Update until it was completed. I think it rebooted at least twice during the install. Seems it took longer than the last update. I haven't noticed any changes yet.

I installed H712 manually this morning and concur with your statement regarding the total time for the installation. Unfortunately it did not fix the IR problems I have been experiencing with the Dish Hopper 3 and my Sofabaton X2 universal remote.
Almighty1
Just a PSA to anyone who wants to install it manually. My update took about 30 minutes from the time I clicked Update until it was completed. I think it rebooted at least twice during the install. Seems it took longer than the last update. I haven't noticed any changes yet.
I think all updates can take between 30 minutes to 1 hour. For me, I just finished updating which completed at 6:38PM Pacific Time, I started between 6:03PM-6:08PM Pacific Time and it rebooted once.
  • Like
Reactions: charlesrshell
Former member 208119
Last reply · posted in General Home Theater Equipment

can't wait to see it in person!!!
53 Replies · 2107 views
  • Like
Reactions: navychop and Foxbat
navychop
Hmmm. Hasn't it generally been about a two year cycle for notable upgrades?
S
Hmmm. Hasn't it generally been about a two year cycle for notable upgrades?
yep!!!
  • Like
Reactions: navychop
Jimbo
In 2 years they may have another new technology for them
  • Like
Reactions: slow_poke_pete
S
In 2 years they may have another new technology for them
in two years we could all be watching halogram t.v.s
  • Wow
Reactions: Jimbo
Jimbo
in two years we could all be watching halogram t.v.s
Seeing most of the Younger crowd, enjoy watching thier little 6-7" Cell phones, in 2 years we may be going back to the old 13" Tv's ... thats what I started with, eventually we jumped all the way up to 19/20" ...
When I moved out, I bought a Huge Sony Tv, 27" was the biggest they came.
Had a Great picture and Lousy Cable Tv.
S
Seeing most of the Younger crowd, enjoy watching thier little 6-7" Cell phones, in 2 years we may be going back to the old 13" Tv's ... thats what I started with, eventually we jumped all the way up to 19/20" ...
When I moved out, I bought a Huge Sony Tv, 27" was the biggest they came.
Had a Great picture and Lousy Cable Tv.
I am thinking were going back to 13 inch sets. kids today don't know what a tv is. when i moved out i spent 40k on a home thearter system with a 36 inch sony trinitron awesome PQ with lousy cable then upgraded to dtv then i was blown away at the PQ.
  • Like
Reactions: navychop and Jimbo
Foxbat
If you're looking at Mini RGB and Micro RGB sets you might want the watch this:
Jimbo
If you're looking at Mini RGB and Micro RGB sets you might want the watch this:

That was Interesting ...
I really like my OLED , mainly was thinking that the RGB tech would help with lighter rooms (I could open the curtains , lol) and they added a great Anti Glare to the RGB version.

Q. Will top of the Line OLED still be around in a few years ?
Is Sony still making the A95 in the future ?
  • Like
Reactions: navychop
navychop
Will Lassie make it in time?!!!

Sorry, couldn't resist.
K
Last reply · posted in Free To Air (FTA) Discussion
Is there any chance someone has a used or new old stock Titanium ASC-1??

Thanks
1 Replies · 64 views
D
Is there any chance someone has a used or new old stock Titanium ASC-1??

Thanks
I actually have one that I only put in service for a few weeks and went with an old school C band positioner. I might be interested in selling it. Where are you located as the unit is pretty heavy.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68234 Replies · 2668120 views
  • Like
Reactions: c-spand
dishstaller
The World I Know - Collective Soul
RaiderPower
Just When I Needed You Most - Randy VanWarmer
  • Like
Reactions: FTA4PA
long_time_Dish
Just What I Needed - The Cars
  • Like
Reactions: FTA4PA
Bobby
The World I Know - Collective Soul

Just When I Needed You Most - Randy VanWarmer

Point Of Know Return - Kansas
No match, back to:

Just When I Needed You Most - Randy VanWarmer
long_time_Dish
Just What I Needed - The Cars
Mister B
Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
I am seeing that software version 711 downloaded this morning. I am seeing an indicator of how long I have paused a live show just to the right of the timeline near the bottom of the screen. I wonder if this is meant to fix the pause bug that other members have been discussing?
151 Replies · 3459 views
jsmit86
I got version 712 yesterday. I can confirm that it does not fix the no sound with dolby digital selected during 4K HDR events on the Hopper 3.
Bobby
I got version 712 yesterday. I can confirm that it does not fix the no sound with dolby digital selected during 4K HDR events on the Hopper 3.
You have to give the powers that be a little time to find the cause and to install the fix. I wouldn't expect it before 713 or 714.
rvvaquero
You have to give the powers that be a little time to find the cause and to install the fix. I wouldn't expect it before 713 or 714.

That's one of the things I like about you Bobby. You're such an optimist.
GRB1959
I downloaded and installed H712 on my Dish Hopper 3 this morning and the previous issues with IR codes not working from universal remotes is still an issue.
long_time_Dish
Still on H711 here... Is there a thread for H712 where we continue this or stay here until we get 712?
  • Like
Reactions: charlesrshell
navychop
Start one.
  • Like
Reactions: charlesrshell
long_time_Dish
Start one.
Did so...
  • Like
Reactions: charlesrshell
S
Last reply · posted in DISH Network Support Forum
I called in today to activate a second hopper. i had the rep run the numbers they came back as clean not leased and no money owed on it. so i said activate it. and he turned around and said that dish no longer allows two hoppers on one acct.. you used to be able to one leased and one purchased!!! i call BS on that!!! since when is dish no longer allowing people to buy receivers from third party dealers aka solid signal. the rep said it would be a leased box. did i just deal with a complete idiot or has dish changed there policy? i am thinking i dealt with a complete idiot. the rep even said there going after people with more than one hopper and shutting them off.
67 Replies · 1578 views
Jimbo
These Videos look like they are from the 60's !!!

Heres hoping the picture we use to watch was better than that (Before HD)
MikeD-C05
These Videos look like they are from the 60's !!!

Hers hoping the picture we use to watch was better than that (Before HD)
We used to watch VCR videos in the early 80s all the time and it wasn't even 480i. Thank it was 240p. It was not very good. But we didn't know that back then. We were just happy we could record something and watch it later. It did look some better when it went to 480p. I can honestly not see a difference between full HD and 4k. Even 1080p looks fine to me.
  • Like
Reactions: charlesrshell
S
I believe you had to be 480i to make typical NTSC TVs sync up at all. However, VCRs only recorded a portion of the of the horizontal resolution of NTSC - which was determined by the frequency response that could be recorded. I think that was effectively around 240 horizontal lines for the average (decent) VHS VCR and around and around 250 for the average Beta VCR. (i and p numbers are vertical resolution.)

On top of that they were analog, full of noise and dropouts, and there were plenty of time base errors - meaning the scan lines didn't all exactly line up due to variations in when the tape appeared to the playback head. And when tapes were duped, the frequency loses, time base errors and noise got massively worse.

And, to the shock of many of the VCR engineers, most customers recorded everything in the slowest speed available, and the engineers only added those slow speeds because marketing made them. (So Americans could record football games.)

The NTSC standard itself was pretty good for 1941. Home VCRs didn't come close to it though.
  • Like
Reactions: charlesrshell
dishdude
What Year was that from ?

2005ish would be my guess judging by the Dish 500 and small LCD TV. This was probably recorded on VHS, was in SD and Dish's studio productions always looked bad at the time. Remember how bad the Charlie Chats looked? I swear they recorded them on a old camcorder.
fmj77

I never pirated Dish, but throughout most of the 1990s and into the early 2000s when I had cable I also had a de-scrambler that got me all of the PPV and premium channels. Just subscribed to the basic plan and the de-scrambler did the rest. Then it all went digital with much stronger encryption and that turned my de-scrambler into a paperweight.
  • Like
Reactions: charlesrshell
Almighty1
We used to watch VCR videos in the early 80s all the time and it wasn't even 480i. Thank it was 240p. It was not very good. But we didn't know that back then. We were just happy we could record something and watch it later. It did look some better when it went to 480p. I can honestly not see a difference between full HD and 4k. Even 1080p looks fine to me.
It seems like things only make a difference after a certain size for a TV as I wasn't able to tell a difference between VHS and SVHS on a 20" or less CRT. Then ofcourse when seeing the same VHS tapes on a larger TV like 27" Sony XBR and 43" Pioneer Plasma, then one could see how bad lower resolution sources was.
  • Like
Reactions: charlesrshell
Almighty1
About a decade ago, DISH did go after companies that pirated content they also provided.


DISH NETWORK, BROADCASTERS SEEK $326 MILLION JUDGMENT AGAINST ALLEGED PROGRAMMING PIRATES

This is the reason people with IPs in the U.S. could no longer connect to sites where one could watch it online for free.
  • Like
Reactions: charlesrshell
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I had to drop by Sam's the other day...hadn't been in that place in over a year. I took a look at the TV section to see what was new and they had a 98 inch model for sale....can't remember the brand or price as I just wanted to get what I came for and get out. The box was of course HUGE and I couldn't help but wonder just how big these things are going to get. Just getting one of those suckers home would be a chore, especially with these short bed pickups they are selling these days.
34 Replies · 272 views
  • Like
Reactions: FTA4PA
S
I always found it amusing watching morons trying to fit big screens in small cars :biggrin
EarDemon
I always found it amusing watching morons trying to fit big screens in small cars :biggrin

I haven't bought any AV component in a B&M store in over 20 years. I think the last thing was my 42" Grand Wega Rear Projection HDTV from Circuit City. At the end of last year when I got my 65" Bravia 8 II, I ordered online directly from Sony and had it delivered. I don't know if it could have fit in the back of my Expedition. The delivery guy parked his semi on the side of the road, got out, rolled up the back door, lowered the lift gate and came out with my TV on a dolly and wheeled it up the driveway. Easy peasy for me.

I personally would rather have better quality over larger size. I've seen people with 80"+ TVs that look like garbage and were like $1200. I know I'm paying the Sony tax, but I would rather pay $3000 for a higher end 55-65" Sony then $1500 for a 98" from someone else.
  • Like
Reactions: AZ. and Jimbo
Foxbat
Having fun with A.I. translation tools. Siri had this to say about the upper-right Japanese label:
IG TAI FRAME

Digital frame memory TV

KX-45ED1 $2,700,000F

KX-45ED1T: 2,800,000 yen

(Remote control AN- 572, RM 554 included)

KX-45ED1 and KX-45ED1T are order-made/. It will take a little time after receiving this order, so please prepare it.

●The stubborn quality and installation fee that I love with the purple of the hair is a separate treatment.
TRG
TRG
Anything more than a 55" would be overkill in my viewing space.
R
I haven't bought any AV component in a B&M store in over 20 years. I think the last thing was my 42" Grand Wega Rear Projection HDTV from Circuit City. At the end of last year when I got my 65" Bravia 8 II, I ordered online directly from Sony and had it delivered. I don't know if it could have fit in the back of my Expedition. The delivery guy parked his semi on the side of the road, got out, rolled up the back door, lowered the lift gate and came out with my TV on a dolly and wheeled it up the driveway. Easy peasy for me.

I personally would rather have better quality over larger size. I've seen people with 80"+ TVs that look like garbage and were like $1200. I know I'm paying the Sony tax, but I would rather pay $3000 for a higher end 55-65" Sony then $1500 for a 98" from someone else.
I ordered my last two TV's (55" & 75") from Sam's Club five years ago which were delivered free. Both of these were the latest Sony model they had. In the past I usually get either Samsung or Sony TV's. I got Sony this time being the Sony models at Sam's were newer than the Samsung's. Back then my wife and I were able to wall mount them ourselves. Now we would have to pay someone to do this. My wife has been hinting about an 85", but I don't see paying that much for just a few more inches.
navychop
but I don't see paying that much for just a few more inches.

But your wife is willing to pay more for a few more inches.
  • Haha
Reactions: Jimbo and HIFI
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 1 views
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Some of you know about this, most do not. The entire coastline of OR and WA are ticking timebombs. Everyone felt this area was not prone to earthquakes....then one scientist decided to challenge that theory.
I should add that if this topic is of interest, you should buy the book, which is mentioned in this lecture, Full Rip 9.0


View: https://www.youtube.com/watch?v=UJ7Qc3bsxjI&pp=ygUqZ3JlYXQgZWFydGhxdWFrZXMgb2YgdGhlIHBhY2lmaWMgbm9ydGh3ZXN0
12 Replies · 75 views
harshness
Everyone felt this area was not prone to earthquakes...
That's not true at all. We get earthquakes fairly frequently, and some of them do damage. This one woke me up when my headboard hit the wall:


Plate tectonics has always been part of the Pacific Northwet experience, but we also have much more volcanic activity than most CONUS locales. More recently, minor seismic activity due to aquifer migration has been registering.
  • Like
Reactions: Foxbat and Bobby
dishstaller
That's not true at all. We get earthquakes fairly frequently, and some of them do damage. This one woke me up when my headboard hit the wall:


Plate tectonics has always been part of the Pacific Northwet experience, but we also have much more volcanic activity than most CONUS locales. More recently, minor seismic activity due to aquifer migration has been registering.
You are extremely wrong about this. And I am not talking about 1993. I'm talking about the mid 1980s. When Brian Atwater challenged the notion that the Cascadia region was a "dead zone" he was totally ostracized from the seismic community. Why not read the book I referenced and learn rather than challenge someone who HAS read it. If what was stated in this book was pure bs, then Nick Zentner certainly wouldn't have recommended it AND referenced it.
Most people were still unaware of this fault until 11 yrs ago The New Yorker magazine came out with the article The Really Big One.

For the record, Brian is now held up as being a genius in this field....which he truly is.
harshness
I'm talking about the mid 1980s.
Jump ahead forty years to the mid twenty-teens where things have mostly settled down after Mt. St. Helens.

I participated in an official FEMA tsunami exercise and exposition a few years back, so I'm fairly up on what's going on in terms of the Big One, and rest assured, there are all sorts of scenarios being actively planned for by jurisdictional Emergency Management agencies.

Right now, we're all considerably more concerned about a possible Godzilla El Niño and what it might mean for the 2027 wildfire season.
  • Like
Reactions: Foxbat
dishstaller
, and rest assured, there are all sorts of scenarios being actively planned for by jurisdictional Emergency Management agencies.
I've watched several videos on YT that the emergency services has put up.....especially Seaside, OR...may have been Oceanside. The biggest problem they face is the fact that the bridges folks would have to use to escape the tsunami probably won't be there. I also noticed something they are overlooking. They have a place built for people to flee to that is 50 ft above sea level. What they are overlooking is the same thing the Japanese overlooked and paid the price for in 2011. Their seawall WAS high enough to block that tsunami. Why did it go over then? They failed to take into acct the ground DROPPING. Seems like in that case it dropped by 10 ft so all of a sudden that wall was 10 ft too low. That tsunami shelter they have at 50 ft above sea level won't be 50 ft above sea level. Now how far will the land drop? Who knows. In that initial video I linked to, one of the exercises they did was take the data from the Japan 2011 earthquake and flip it over to the coast of OR...pretty spooky.
One thing to consider when thinking about how much the land could drop is to look at that ghost forest on that beach in OR. The tops of those ancient trees are now showing. The bottom of those trunks is about 9 ft beneath the sand. Now THAT was a huge drop.
harshness
The biggest problem they face is the fact that the bridges folks would have to use to escape the tsunami probably won't be there.
The idea is typically that there will be some warning coming from one of the many active tsunami warning systems in most coastal towns. Most of the bridges run north and south while you gain elevation by going eastward. In the Oregon Coast Range (mountainous), you can attain elevation fairly quickly.

There are scenarios where safety may only be possible east of the Cascade Range (real mountains), but there are plans for that as well.

This, versus Florida, where more than a little of its 13' of average elevation will be underwater in a few hundred years. The greater landmass is sinking about .5mm/year, but the ocean is currently rising around an inch every three years.
TRG
TRG
Eating Popcorn GIF
dishstaller
Most of the bridges run north and south while you gain elevation by going eastward. In the Oregon Coast Range (mountainous), you can attain elevation fairly quickly.
I had to look back up the video to see which town they were talking about and I referenced to when it came to bridges.....it was Seaside, OR. There are two narrow bodies of water....they look like rivers but looking on the map, I'm not sure what you would call them. They were concerned that those bridges would be taken out and there would only be a 20 min warning. A buddy of mine went out there from OK and I mentioned he needed to acquaint himself with the tsunami escape routes....just in case. When he got back he told me that frankly he thought I was nuts for even mentioning a tsunami but when he got to Seaside, he said there were signs everywhere showing where to go.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5422 Replies · 334998 views
dfergie
Went with fajitas, beef strips cooked with green chile & diced potatoes, sharp cheddar cheese, sweet tea.
  • Love
Reactions: TRG
TRG
TRG
Loco Moco and macaroni. Hawaiian Sun strawberry guava nectar to drink.

loco.webp
  • Like
Reactions: Bobby and dfergie
TRG
TRG
Breakfast for lunch. Scramble with hash browns, egg, chorizo and onion smothered with green chile and cheese with a side of sausage. Coffee.

sausage2.webp
  • Like
Reactions: dfergie
dfergie
Cooked a roast in the crockpot all night, shredded and made into mini burritos (fajita tortillas) with cheese... Sweet Tea
  • Like
Reactions: TRG
TRG
TRG
Beef and potato burrito with chopped green chile and cheese. Water.