Social Feed

turbosat
Last reply · posted in C-BAND Satellite Discussion
Anybody else having Me-tv problems with freezing/halting? Seems to happen any time of day or night, and I'm noticing lower signal levels on ME, compared to the other weigel channels on 101W, about 10pts lower. Other channels on this satellite play ok, even the religious channels and the scrambled ones seem to have higher signal levels. I think this has been on-going with me-tv, but lately seems to have been worse. At least for the last week or so.
75 Replies · 7958 views
turbosat
DingDingDing! I think I finally figured it out too,as being improper lnbf skew (I sure do miss my c-band lnb & polarotor,but they just aren't easy to use with these digital receivers)
Tinkered with the lnbf-skew for about an hour and now my ME-tv signal is up from about 72-74 to 86. I knew that it was scanning some of those "skinny signals" in as both H & V, at times, so it had to be the skewer! Biggest trouble for me is, my 10' is on a little rocky peak in backyard, I cannot reach the lnbf when it is aimed at 101W. To tweak it I have to run the dish at least to 123W so I can reach the thing, then run it back up to test my adjustment. I think a 12' step ladder might reach it, but I haven't got a step ladder that tall, lol. Yet. So, all Me-tv'ers-don't give up on getting a stable signal, just takes patience, and a big enough dish that's well adjusted.
  • Like
Reactions: . Raine and Babadem
fred555
This is how I do it. With the scaffolding , the ladder is not in the way of the signal, and you can stand out of the way of the signal too.

quadstar.jpg
Babadem
DingDingDing! I think I finally figured it out too,as being improper lnbf skew (I sure do miss my c-band lnb & polarotor,but they just aren't easy to use with these digital receivers)
Tinkered with the lnbf-skew for about an hour and now my ME-tv signal is up from about 72-74 to 86. I knew that it was scanning some of those "skinny signals" in as both H & V, at times, so it had to be the skewer! Biggest trouble for me is, my 10' is on a little rocky peak in backyard, I cannot reach the lnbf when it is aimed at 101W. To tweak it I have to run the dish at least to 123W so I can reach the thing, then run it back up to test my adjustment. I think a 12' step ladder might reach it, but I haven't got a step ladder that tall, lol. Yet. So, all Me-tv'ers-don't give up on getting a stable signal, just takes patience, and a big enough dish that's well adjusted.
What Receiver are you using? I have the same issues on some satellites on the A3. Usually, in situations like this, the intended polarity has quality while the opposite doesn't.
Corrado
Can we see a photo of where the zero skew mark is in relation to the top of the dish vertical axis and the f/d setting?
turbosat
This is how I do it. With the scaffolding , the ladder is not in the way of the signal, and you can stand out of the way of the signal too.

View attachment 108766
Fred 555 , you are ladder-rich! Nice setup. If I had enough rope, maybe I could rappel down from the radio tower to the dish, lol, it's about about 20' away.
turbosat
What Receiver are you using? I have the same issues on some satellites on the A3. Usually, in situations like this, the intended polarity has quality while the opposite doesn't.
baba, I was using the good ol Vantage 1100 at the time, but it was also acting the same weird way with my little X2 Premium HD. I'm tickled that adjusting the skew has solved the problem , both boxes are picking up the channels superbly now.
turbosat
Can we see a photo of where the zero skew mark is in relation to the top of the dish vertical axis and the f/d setting?
Corrado, I will try, but don't know if I can get into an angle high enough to picture it. Maybe I can describe it somehow to you, once I look at it again myself! Sorry for the delay, I'll check on it when the sun rises Sat.
turbosat
Corrado, I will try, but don't know if I can get into an angle high enough to picture it. Maybe I can describe it somehow to you, once I look at it again myself! Sorry for the delay, I'll check on it when the sun rises Sat.
UPDATED:
Corrado, I wasn't able to get a picture showing the mark on the lnbf, but maybe Sunday I can think of another way. I can tell you , on this Titanium c-lnbf, it has marks for -30 0 +30, Just put the zero mark in line with the polar axis of your mount, then compensate for the difference in magnetic north & true north, and you will be very very close. Here, my lnbf is just very slightly counter-clockwise of lining up exactly with the polar axis of the mount. So far it's working well.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
T
· posted in DISH Network Support Forum
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
0 Replies · 4 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5389 Replies · 334594 views
TRG
TRG
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

20260503_145250.webp
  • Like
Reactions: Bobby and dfergie
dfergie
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

View attachment 191651
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
  • Like
Reactions: TRG
TRG
TRG
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
I've been retired since October. It was very strange at first. But I'm loving it now.
  • Like
Reactions: dfergie
TRG
TRG
Creamy flat chicken enchiladas with green chile, beans and rice.

enc.webp
  • Like
Reactions: dfergie
dfergie
Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi
IMG_5609.webp
  • Like
Reactions: TRG and Bobby
TRG
TRG
I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.


hdog.webp
N5XZS
Last reply · posted in Over the Air Television By RabbitEars.Info
New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.😎
10 Replies · 150 views
N5XZS
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2
  • Like
Reactions: comfortably_numb
comfortably_numb
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet :)
N5XZS
Yes that's a good channel MovieSphere, only thing is the missing CC on it. :rolleyes: :hatsoff2
  • Sad
Reactions: comfortably_numb
comfortably_numb
According to the FCC listing, the tower is near I-40 and Juan Tabo:

primestar31
According to the FCC listing, the tower is near I-40 and Juan Tabo:

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
6 Replies · 86 views
zippyfrog
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

1781191675068.webp
  • Like
Reactions: charlesrshell
T
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
zippyfrog
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

1781195549844.webp
  • Like
Reactions: charlesrshell
MikeD-C05
These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.
T
Does cable charge box rent?
  • Like
Reactions: charlesrshell
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

71 Replies · 3426 views
fmj77
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.
  • Like
Reactions: charlesrshell
Bruce
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.
Y
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.
  • Like
Reactions: charlesrshell
T
I despise that most of all. I'm going to talk to a remote?
T
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.


1gbit up and down here from att start out great was suppose to be $60 for life of service, with years time it went back up to $80 I complained about they gave us $49 for year which about to end, I Wonder what prices will be when it "up" I in no way like ATT fiber service there DNS that are hardcode and unchange able in the router are some WORSE DNS I ever used. you know how much of pain it is to change DNS setting on EVERY single wireless device...
  • Like
Reactions: charlesrshell
mwdxer1
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.
I dropped Dish a couple years back after having them for 25 years. The pricing got higher and after we got high speed internet, I watched it less and less. It got to the point all I watched was TCM for classic movies. Many of them are on You Tube now and a Premium subscription is $14 a month. A far cry of the $100 a month was paying with AT180, Supers, and locals. I get locals OTA anyway. I took down the dish several months ago and tossed it. I owned all my my equipment, so nothing to return. Do I miss a traditional cable type service? No way. If I want one I have all of the free live streaming with Roku, the Fire Stick, as well as Google TV. Right now as I type this, I am watching episodes of "The Midnight Special" from 1976 on You Tube, ad free. Dish was fine for many years. I do not regret buying the equipment and installing it myself (No installers in 1999). I enjoyed Dish for many years. My thoughts, Dish & Direct will be forced to merge in time, or they both will be gone. Even cable companies are getting out of TV. Some are only selling the internet and phone packages.
tanman
I despise that most of all. I'm going to talk to a remote?
  • Like
Reactions: charlesrshell
nelson61
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more
  • Like
Reactions: charlesrshell
MikeD-C05
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more
In my area we get 2 news feeds spread over 4 local stations.
ABC/NBC (TEGNA)
Same news cast simulcast over both channels.

CBS/Fox (Sinclair)
Same news casters at 5pm, 6pm, 10pm.
Fox shows an hour at 9pm but same news casters.
  • Like
Reactions: charlesrshell
lordodogg
Last reply · posted in DIRECTV General Forum
Hello again, haven't posted here in a while.

This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).

Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.

I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).

I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).

I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.

Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).

Thank you all in advance!
4 Replies · 152 views
Tom Speer
My HR54 blue light is on this morning. I think you ae right about the plugins. They are tweaking things in the customer National release. What version does your HR44 Genie have now? I think you are probably on the same varsion as the CE group today.
lordodogg
I believe mine says 0x1D7F
Tom Speer
That is what I have.
  • Like
Reactions: lordodogg
lordodogg
Happened again today & have new software, 0x1d88