Iceberg,
The Pansat 5000HC must have a different menu because the volume keys are left/right and channel keys are up/down. When in Channel edit mode, the left/right keys switch between a variety of pull down menu options (channel rename, channel delete, channel sort, favorite add, etc). The left/right (volume keys) on the 5000 do not allow for multiple selections. Nonetheless, I have tons of questions so let me try to fry the bigger fish first...back to T5 which is driving me absolutely crazy...
Q1. Is there anyway to positively ID a specific satellite? If I use a satellite signal meter, will any ID the satellite by name as opposed to just give me a signal reading? That may help me alot. There are lots of satellites in that general vicinity (am in Northern California around San Jose with a zip of 95148). All the tables tell me to look in the following direction:
Az(t):142.7 Az(m): 127.4 Elev:39.5 and Skew:-28.8. I need a surefire way of IDing that bird.
Q2: If I plan to hook up to another satellite and use a Diseqc (say I already have Sat 1 on Port 1 and keep Port 2 for T-5), I assume that I have to first unplug the Diseqc from the receiver cable, plug the receiver cable directly to the LNB on the satellite aimed for T-5 first, find it, and then go back onto the Diseqc. Is this true? If so, do I have to rescan for channels on Sat 1? or can i just plug the T-5 Sat LNB into the Diseqc Port 2, set up my receiver to look for T-5 on Diseqc switch 2 and check for signal?
Q3: I notice the TPs pre-programmed into my Pansat 5000 (though it is a recently released model) are different than those posted on the Lyngemark Frequency Table. Can someone with a Pansat confirm if this is true. If it is, do I first have to reprogram all the TPs? Can I just add or edit one TP and set receiver on it while searching for T-5?
Really would appreciate some insight ... am looking forward to diving deeper...
thx