Social Feed

H
Last reply · posted in DISH Network Support Forum
We currently have VIP622. One of the features we like is being able to swap between the two tuners we are buffering to keep up with two programs WITHOUT recording either. Can we do this with a Hopper 3?

We are distributing the Dish signal through a Channel Plus Demodulator to our bedroom. We can control the VIP 622 from there with an RF Dish Remote. This remote is in addition to the original that came with the receiver. Is this possible with the Hopper 3? If so which model Dish Remote can do this?

Thank you,

Henry
27 Replies · 3497 views
JSheridan
We currently have VIP622. One of the features we like is being able to swap between the two tuners we are buffering to keep up with two programs WITHOUT recording either. Can we do this with a Hopper 3?

We are distributing the Dish signal through a Channel Plus Demodulator to our bedroom. We can control the VIP 622 from there with an RF Dish Remote. This remote is in addition to the original that came with the receiver. Is this possible with the Hopper 3? If so which model Dish Remote can do this?

Thank you,

Henry


Yes, you can swap between two tuners and you can even buffer 4 tuners using MultiView with a Hopper 3.

And yes, you can still modulate the composite signal with your Channel Plus modulator and send it to other TV's. All of the Hopper remotes are RF so you can use any of them to control the Hopper from another room. You can also have up to 8 remotes paired to each Hopper or Joey.
H
Yes, you can swap between two tuners and you can even buffer 4 tuners using MultiView with a Hopper 3.

And yes, you can still modulate the composite signal with your Channel Plus modulator and send it to other TV's. All of the Hopper remotes are RF so you can use any of them to control the Hopper from another room. You can also have up to 8 remotes paired to each Hopper or Joey.

Thank you.

Do you know which Dish Remotes other than the original for the Hopper 3 will work in RF mode with the Hopper 3? It appears the Dish Remote 40 will do this.

Henry
  • Like
Reactions: JSheridan
JSheridan
Thank you.

Do you know which Dish Remotes other than the original for the Hopper 3 will work in RF mode with the Hopper 3? It appears the Dish Remote 40 will do this.

Henry

You're welcome Henry. I still have a couple of Channel Plus modulators in use here.

All the Hopper remotes work in RF mode. That's the 40.0, 50.0, 52.0 and 54.0.
H
You're welcome Henry. I still have a couple of Channel Plus modulators in use here.

All the Hopper remotes work in RF mode. That's the 40.0, 50.0, 52.0 and 54.0.

Thank you very much. Good to know the Hopper 3 will pair with up to 8 remotes at one time and there are so many remotes that are compatible. Do you have a preference for one of the ones you listed?

Henry
  • Like
Reactions: charlesrshell
JSheridan
Thank you very much. Good to know the Hopper 3 will pair with up to 8 remotes at one time and there are so many remotes that are compatible. Do you have a preference for one of the ones you listed?

Henry

I like them all except I'm not that crazy about the 50.0 because of the touchpad.

The 40.0 has the most buttons for easy access to menus and features.

The 52.0 has two power buttons, one for the TV and one for the receiver.

The 54.0 has voice control and is backlit.
long_time_Dish
Will the Hopper 3 (or any of the Hopper series) work with my Pronto Pro remote?
Bobby
Will the Hopper 3 (or any of the Hopper series) work with my Pronto Pro remote?
It will if you set the Pronto up as a 922.... I found that on a long ago post here on SatGuys....
long_time_Dish
It will if you set the Pronto up as a 922.... I found that on a long ago post here on SatGuys....
Thanks, but never had a 922 (or remote that goes with it), so how does one do that?
Tampa8
Thanks, but never had a 922 (or remote that goes with it), so how does one do that?

Tell the Pronto in set-up your receiver is a DISH 922.
  • Like
Reactions: Bobby
Bobby
Tell the Pronto in set-up your receiver is a DISH 922.
Yep, just set the Pronto up as a 922....
H
I like them all except I'm not that crazy about the 50.0 because of the touchpad.

The 40.0 has the most buttons for easy access to menus and features.

The 52.0 has two power buttons, one for the TV and one for the receiver.

The 54.0 has voice control and is backlit.


The 40.0 has a swap button whereas the 54.0 does not. Is the "Swap" button function available on the 54.0. If so how do I access it?

Thanks
ChadT41
The 40.0 has a swap button whereas the 54.0 does not. Is the "Swap" button function available on the 54.0. If so how do I access it?

Thanks
Refer to the post above yours.
  • Like
Reactions: JSheridan
JSheridan
The 40.0 has a swap button whereas the 54.0 does not. Is the "Swap" button function available on the 54.0. If so how do I access it?

Thanks

Like Chad posted when in Sat mode you use the Input button on the side of the 54.0 remote to swap inputs.
  • Like
Reactions: charlesrshell
long_time_Dish
Yep, just set the Pronto up as a 922....
Thanks! Does that work with the entire Hopper series, or just the H3?
Bobby
Thanks! Does that work with the entire Hopper series, or just the H3?
All of them...
long_time_Dish
All of them...
Terrific! Thanks... :)
M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
13 Replies · 733 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
Foxbat
Cough, cough. COVID vaccine implants.

:oldlaugh
That would be handy. Download the latest RNA snippets that can be updated over 5G and no more shots! You're a Genius!
  • Haha
Reactions: navychop
R
I want it and I have to have it.

I can neuter the phoning home with adguard home so it won't be doing that in my castle but I prefer without Internet so that my TVs in the house don't turn into e-waste
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
1 Replies · 84 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Chit Chat Club
It states the average amount they are under water is OVER $7,000. :eek

Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.

0 Replies · 11 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68659 Replies · 2680271 views
  • Like
Reactions: c-spand
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
  • Like
Reactions: long_time_Dish
RaiderPower
Take It Easy On Me - Little River Band
long_time_Dish
Take It Easy - The Eagles
  • Like
Reactions: gms49ers
jamieh1
Last reply · posted in DIRECTV Programming Forum
DIRECTV Stream/Internet added Ch 4105 SportsGrid
268 Replies · 38715 views
  • Like
Reactions: c-spand and KyL416
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
K
Now live:
4275 Law & Crime
4364 Military Makeover Channel
K
Game Show Central is now live on channel 4342
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
It only took them 41 days to announce it
  • Like
Reactions: Mr Tony
K
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5449 Replies · 336094 views
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 52 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks