Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog

ViaSat-3 is designed to expect the unexpected when it comes to bandwidth flexibility

ViaSat-3 internet satellite


Reprinted with permission from the Viasat blog.

What is ViaSat-3


With the successful launch of ViaSat-3 Americas, ViaSat-3 is expected to be nimble enough to move bandwidth to where it's needed most.

With two more satellites expected to round out the full ViaSat-3 constellation, it is important to look back on how far we have come, starting with ViaSat-1.

Before ViaSat-1 came on the scene, communications satellites had low bandwidth capacity and were not really designed to scale to meet consumer, business, and government needs.

Viasat saw an opportunity to push the industry forward by maximizing existing technology to create ViaSat-1, then ViaSat-2 pushed the technology even further.

With the demand for internet connectivity continuing to rise, it requires a satellite of a different type – ViaSat-3.

It is the first satellite Viasat has built from the ground up, completely reimagined from its predecessors.

Each satellite in the ViaSat-3 constellation is anticipated to deliver at least 1 Terabit of data throughput per second (1Tbps) to customers where they are, whether that be on the ground, in the air or at sea.

"With ViaSat-3, we're working on the hardest problems we've ever worked on" Viasat co-founder and chief technical officer Mark Miller said. "Others would look at that and get nervous. Our engineers look at it as a challenge, a challenge that motivates them. And that's what makes it fun."

Intricate ground network


A satellite with this amount of capacity requires a more extensive ground network than previous generations. Like the satellite itself, ViaSat-3's ground network is distinctly different from ViaSat-1 and ViaSat-2.

Compared to ViaSat-1's 17 sites and ViaSat-2's 42 sites, ViaSat-3 Americas has sites in hundreds of locations — and that's just in North America — all with a smaller physical footprint.

These sites make up the invisible highway of signals between internet satellites. Known as satellite access nodes (SANs), together they receive and transmit signals from geostationary orbit down to Earth. They are all strategically placed to maximize the capability and availability of ViaSat-3 Americas.

These smaller ground stations, about the size of a garage, are designed to provide redundancy — if a ground station temporarily lost power, the others would then adapt to outages and route traffic other ways.

Bandwidth where it is needed most


The demand for satellite internet access ebbs and flows across the globe during different times. ViaSat-3 is designed to address those fluctuations as they occur – delivering bandwidth where and when it is needed most.


This flexibility is crucial for serving a broad cross-section of Viasat's customers.

Government and Defense


The U.S. military must constantly pivot their missions as conflict hotspots arise. The ability to direct extra capacity to smaller regions, where activity is highest, is critical to their mission. Additionally, ViaSat-3 will be able to protect against jamming, a tactic commonly used by adversaries to cut off ground troops connectivity.

Aviation


As our aviation partners strive to bring more value to their customers, offering in-flight Wi-Fi is on the rise. To address this need, ViaSat-3 will be able to increase bandwidth for their more popular flight routes, helping ensure passengers remain connected. Additionally, ViaSat-3 is designed to quickly pivot bandwidth to support busy airport hubs during peak travel times.

Residential and Business


The way people are using the internet has changed drastically compared to previous years. More people are learning and working remotely, the massive expansion of mobile apps and the increased ability to shop and access health care and other daily services online requires more bandwidth in more places. It's clear that demand everywhere is increasing, but there are still 2.7 billion people on Earth that lack regular access to the internet. ViaSat-3 will help enable people and businesses in underserved communities to finally connect to the internet and create new opportunities.

A new era for connectivity


ViaSat-3 is a uniquely different satellite constellation and will enable internet connectivity where and when it is needed most. This newly enabled connectivity has the potential to unlock opportunities for those in underserved communities. Additionally, ViaSat-3's ability to quickly address bandwidth congestion will benefit the unique needs of our customers around the world.


The post ViaSat-3 is a reimagined internet satellite on a mission to connect everyone, everywhere. appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 365 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5448 Replies · 336076 views
M
Garlic cheese bread
Green beans
Apples
Chocolate Milk
Some weird noodles. ;)
(They have salad and a couple other fruits if wanted)
  • Like
Reactions: dfergie
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680216 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
  • Like
Reactions: RaiderPower
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 46 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 284 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 51 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 55 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.