Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
DIRECTV's Gemini devices are some of the most popular ones we've had at Solid Signal in a long time. But, they're also a little confusing. DIRECTV itself uses the Gemini name for three different devices that run on two different services. So, it can be a little hard for a consumer to know what they have. I'll try to make it as easy as possible.

If your Gemini looks like this

DSC_3152.webp


This is DIRECTV's Gemini Air device. It's not very big and it's designed to hang off the back of a TV. It's easy to understand what this device does and doesn't do. The Gemini Air is designed for DIRECTV's streaming service, which is called by many names. It's called DIRECTV Stream, DIRECTV for Streaming, and sometimes just DIRECTV. At any rate, it's a service that lets you get live TV through your internet connection without a satellite dish.

What you can do with Gemini Air

  • Use the device with one TV (you can get additional ones for additional TVs)
  • Use DIRECTV's Cloud DVR service for unlimited storage
  • Use the DIRECTV app on your phone to view your recordings
  • Use this device without a standalone DVR or any other satellite equipment.

What you CAN NOT do with Gemini Air

  • Connect to a satellite service
  • Use this device without an internet connection
  • Use a universal remote (you must use the remote it comes with)

That makes it easy to understand what's going on with this device. Think of it as the equivalent to a Roku Streaming Stick or Amazon Fire Stick, and you'll get the basic understanding you need.

If your Gemini looks like this

C71KWX_6-1-e1681502347884.png


Here's where it gets confusing. There are two devices that look exactly like this. They're both called Gemini. One isn't offered to new customers anymore, and that helps a little bit. But, you can't tell just by looking at the box which one you have. So, here's a little bit more explanation:

Gemini for Satellite


The DIRECTV Gemini for Satellite is similar to a Genie client. It connects over a coaxial cable or wirelessly to a Genie DVR in your home. The easiest way to know that you have this Gemini is to press the HOME button on the remote. If the menu looks like this…

vlcsnap-2023-04-13-12h13m07s992-1024x576.png


…with live TV playing in the upper-left corner, that's Gemini for Satellite.

What you can do with Gemini for Satellite

  • Use this device with a single TV (you can add more Geminis, one per TV. There is a maximum number though and it depends on your Genie DVR.)
  • Connect to a DVR
  • Use this device without an internet connection (although you'll lose access to apps.)
  • Connect to a satellite service
  • Use the DIRECTV app on your phone to view your recordings
  • Use a universal remote
  • Keep your recordings as long as you like

What you CAN NOT do with Gemini for Satellite

  • Use this without satellite service
  • Use this without a DVR in the home

Gemini for Internet


The DIRECTV Gemini for Internet was previously known as the DIRECTV Osprey, DIRECTV Stream device, AT&T TV device, and DIRECTV NOW device. It's used for connecting to DIRECTV's internet-only service. The easiest way to know if you have a Gemini for Satellite is to press the HOME button. If it looks something like this…

c71kw_2-1024x575.png


…with live TV playing full-screen behind everything, that is a Gemini for Internet. There's word that some of the menus on the Gemini for Internet may change, so there's another way to know if you have Gemini for Internet. If you remember seeing a signin screen like this one:

vlcsnap-2023-09-20-11h18m16s940-1024x576.png


…where you were prompted for your account information, that's a Gemini for Internet.

What you can do with Gemini for Internet

  • Use the device with one TV (you can get additional ones for additional TVs)
  • Use DIRECTV's Cloud DVR service for unlimited storage
  • Use the DIRECTV app on your phone to view your recordings
  • Use this device without a standalone DVR or any other satellite equipment.

What you CAN NOT do with Gemini for Satellite

  • Connect to a satellite service
  • Use this device without an internet connection

The Gemini for Internet and the Gemini Air are essentially the same device in different sized boxes. Both are used only for DIRECTV's streaming device.

So the answer to the question at the top of this article?


The answer is, if you have a Gemini for Satellite, you can't use it without having a Genie DVR. For the other two Geminis, you can use them without a Genie DVR but you can't use them without internet.

If this sounds confusing, or you need more help choosing equipment, call the experts! Our team is here for you during East Coast business hours. Call 888-233-7563 and we'll take great care of you!


The post Can you use a DIRECTV Gemini without a DVR? appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 266 views
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5449 Replies · 336091 views
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680237 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 49 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 288 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 52 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 56 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.