Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
Those little dongles from the major media companies sure are convenient. They plug into your TV's HDMI port and sit there completely invisible. While it would be even better if they got power from that port too, don't blame them… the HDMI standard on most TVs doesn't support this. It will probably be about 5 years before you see something like that on the majority of TVs.

A lot to like about these little devices


With one of these devices like the DIRECTV Gemini Air, Sling/DISH AirTV Mini, it's easy to upgrade an older TV to watch practically any app you want. Most of them work with some variant of the Android TV operating system so any app in the Google Play store will work. The Amazon Fire stick and Roku Streaming Stick each have their own very robust app store too.

The big advantage of these devices is their size, which isn't big at all. They're all about the size of a box of Tic Tacs, perfect for hiding behind a TV. Depending on the one you get, you can get a very fancy remote that resembles your old cable box or something so simple you'll never forget what each button does.

The one problem you may encounter


With a device this small it's impossible to have a truly wired connection. You're relying on Wi-Fi to get the job done. While that's usually not a problem, you may find that the signal is too weak to stream the programs you want. You may see messages about poor performance or buffering depending on what device you have, even if you have good Wi-Fi in the room where the TV is.

This happens because Wi-Fi signals have a very hard time passing through your TV's screen. There's generally a metal barrier between the screen and the rest of the TV. It's there to specifically stop stray signals from passing through. Without it, the screen itself could be affected by the electronics that make the TV run. The barrier works two ways, though. Even though it's designed to block signals from the back of the TV from reaching the front, it also works the other way. It can block Wi-Fi signals from reaching the back of the TV.

How to solve this problem

SW-35900-15_0.jpg


The easiest way to solve this problem is to get that device out from behind the TV and put it somewhere that the Wi-Fi signal can reach. You'll need an HDMI extension cable like this one from Solid Signal. You plug one end into the TV. The other end goes into your streaming device. This gives you a range of 15 feet where you can put the streaming device. Hopefully that will be enough to get it into good Wi-Fi range. It's true that you'll lose the benefit of hiding the thing behind the TV. But, that's a small price to pay in order to be able to use it at all.

Won't this hurt remote performance?


In general, no. Most of these devices use Bluetooth to communicate between the remote and the device. Bluetooth works better because its signals can get around the shielding on the TV a little better. When you take the device out from behind the TV, there's a chance it could actually work better. This is true even if the device is further away from you. Bluetooth has a range of 30-50 feet if there's nothing blocking it so this might just end up giving you a better experience.

What if this doesn't solve the problem?


This isn't going to solve the problem of the device being in a room with no Wi-Fi at all. Unfortunately a lot of routers aren't strong enough to cover even a modest size house. That's why people buy Wi-Fi repeaters, access points, and mesh networking systems. There's a great selection of Wi-Fi products at Solid Signal that can help with this issue. These are pro-quality devices that will work great for you if you're willing to put in the time installing. You'll also find simple range extenders that can add Wi-Fi to an area if there isn't any.

Having better Wi-Fi in the room where you're watching TV will also let your other devices work better. Because, honestly, you play with your phone while you're watching anyway.

If you'd like to know more about Wi-Fi solutions, call the experts at Solid Signal. We're here for you during East Coast business hours. The number is 888-233-7563. If it's after hours, no problem! Fill out the form below and we'll get right back to you.


The post How to fix Wi-Fi problems with your Gemini Air, Chromecast, Roku Streaming Stick, Fire Stick, or AirTV Mini appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 423 views
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
1 Replies · 82 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Chit Chat Club
It states the average amount they are under water is OVER $7,000. :eek

Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.

0 Replies · 9 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68659 Replies · 2680264 views
  • Like
Reactions: c-spand
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
  • Like
Reactions: long_time_Dish
RaiderPower
Take It Easy On Me - Little River Band
long_time_Dish
Take It Easy - The Eagles
  • Like
Reactions: gms49ers
jamieh1
Last reply · posted in DIRECTV Programming Forum
DIRECTV Stream/Internet added Ch 4105 SportsGrid
268 Replies · 38714 views
  • Like
Reactions: c-spand and KyL416
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
K
Now live:
4275 Law & Crime
4364 Military Makeover Channel
K
Game Show Central is now live on channel 4342
K
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel
It only took them 41 days to announce it
  • Like
Reactions: Mr Tony
K
Now testing:
AyM Sports 3 USA
Best Bets TV powered by VSiN
CBS Sports Golazo Network
CBS Sports HQ
Judge Judy
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5449 Replies · 336094 views
TRG
TRG
Club sandwich and corn chowder. Iced tea.
dfergie
Chili dog bowl, water… (homemade chili)
TRG
TRG
Leftover wanton soup and pork fried rice. Water.
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 51 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 290 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.